Pall X Power 2025 promo 12.5% free

Product Description

In celebration of PALLMANN’s 125th anniversary, we are offering, for a limited time, 1.125-gallons of our industry-leading PALL-X POWER waterborne finish at our standard 1-gallon price. That’s 12.5% more product with each container purchased, free of charge.

Pallmann Pall-X Power is a 1-component clear waterborne hardwood floor finish for commercial or residential use.  No hardener is needed.

Pallmann Pall-X Power is compatible with all Pallmann sealers and finishes.

Coverage and Sheens

• Coverage is approximately 450-500 square feet per gallon.
• Available gloss/sheen levels: Ultra Matte, Satin, Semi-Gloss
• Will not amber over time.

Odor and Stability

• Very slight non-offensive odor.
• Non-flammable: Pall-X Power should be stored in a climate controlled environment.
• Pall-X Power can be used hours or days after initial opening.  

Necessary Tools and Materials

• T-Bar applicator
• Brush
• Cut-in pad or waterborne roller

Drying Process

• Full cure (meaning scuff, scratch and chemical resistant) in 5 days.
• After 24 hours, the floor may be walked on, but it remains susceptible to scuffing or marring until completely cured.
• Do not replace area rugs until the floor has fully cured.
• Do not allow foot traffic until the floor is sufficiently dried and cured.

Cleanup 

• Application tools should be thoroughly cleaned with water and stored in an airtight container.  
• Dispose of any remaining product in accordance with local, state and federal regulations.

For more information: Pallmann Pall-X Power Technical Data Sheet