Bona Craft Oil 2k Care - 1 Liter

Product Description

BONA CRAFT OIL 2K CARE SYSTEM: Bona Craft Oil 2K Care is a maintenance oil for
previously oiled floors, designed to refresh the oils and restore its protective qualities. Bona Craft
Oil 2k Care should be applied as needed based on floors appearance. Visit bona.com for
additional product information.

TIP: If the surface is heavily worn and lost some of its pigmentation, it is possible to add up to
20% of the Bona Craft Oil 2K (Part A) in the corresponding color to Bona Craft Oil 2K Care Oil.

RECOMMENDED APPLICATORS: Red buffing pad, Bona Cut-in Pad, Bona Steel Trow el and
Bona Cotton Cloths.

MIXING INSTRUCTIONS: SHAKE WELL BEFORE USING. DO NOT THIN. DO NOT ADD
WATER.

APPLICATION: 1. Thoroughly clean floor using the Bona Deep Clean System or Bona Craft Oil
2K Soap following label directions. 2. Allow floor to dry completely. 3. Apply a thin coat of the
Bona Craft Oil 2K Care to the floor using a 175 rpm buffer and a red buffing pad working back
and forth with the grain of the wood when possible. For areas the buffer cannot reach, use a
trowel or cut-in pad to apply. 4. Allow the oil to penetrate the wood surface for 15-30 minutes. 5.
Remove excess oil using a buffer and a clean, Bona Cotton Cloth w rapped around a 1" white,
red or green buffing pad. Change cotton cloth as needed. 6. Allow oil to dry thoroughly before
use (12 hours under ideal conditions of 65-80 F and 40-60% relative humidity). High humidity
and or low temperature conditions will extend dry time, while increased ventilation and airflow
will reduce dry time. BE SURE YOU ARE USING THE RECOMMENDED COVERAGE OF
APPROXIMATELY 600-1,200 SQ. FT. PER CONTAINER (coverage may vary dependent on
condition of floor).
CLEAN-UP: Application tools should be cleaned with mineral spirits.
STABILITY: Two year shelf life in unopened container.