Festool MFK 700 Modular Trim Router

Product Description

With its modular design and tool-less base changes, the MFK 700 can easily transform from a vertical to a horizontal position with a few simple steps. Trim laminate and edge band or rout grooves for inlays easily with the light weight and maneuverable MFK 700. Packed with features, this trim router saves you money by allowing you to use bearing-less bits when used with the attachable base feeler bearing. 1/256" (1/10 mm) fine depth adjustments and exceptional dust extraction make this an ideal router for all of your light routing tasks.

Due to the nature of the horizontal base design, there is a limit to the bit size for use in this configuration.  Do not use a bit with a cutting length greater than 5/8" (16 mm) and a shank length of 1-13/16" (46 mm).  For greatest range of adjustment a 3/4" (19 mm) bit diameter is recommended.

Recommended Festool bits - 491 666 and 491 670 for trimming of edge banding with horizontal base.

• Powerful 720 watt (6.0 amp) motor can easily tackle most trimming, profiling and routing applications with variable speed and detachable cord.
• Vertical and horizontal extra-wide bases provides ample support area for maximum control especially near edges or on narrow stock.
• Micro-adjustable depth control to 1/256 inch (1/10 mm) with dual locking columns for precise routing control.
• Threaded insert to accept template guides and phenolic resin baseplate to easily glide on a surface without marring the material to be routed.

California Proposition 65 - www.p65warnings.ca.gov
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are:

- lead from lead-based paints,
- crystalline silica from bricks and cement and other masonry products, and
- arsenic and chromium from chemically treated lumber.

Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.