DuraSeal Waterbased Fast Dry Sanding Sealer

Product Description

DuraSeal Waterbased sanding sealer seals the wood to prevent the finish from penetrating. It is compatible with all DuraSeal waterbased finishes and is also available in 5 gallon pails.

Coverage: 500-600 sq. ft/Gallon

Dry time: 2-3 hours

Application method:

• Pour a 4"-6" wide line of DuraSeal Waterbased Sanding Sealer directly from the container along the starting wall. Go with the direction of the floor or grain.
• Pull the sealer with a clean, moistened applicator toward the other wall with an angled, squeegee motion.
• As you approach the wall, turn applicator and pad out excess material parallel to the wet edge.
• Feather all turns, stopping and starting points.
• Allow sealer to dry 3 hours before abrading with a DuraSeal Pre-Treat Pad. After abrading, vaccum thoroughly, tack with a towel lightly dampened with water, and apply your selected DuraSeal waterborne finish per label directions.