Loba 2K Invisible Protect Gallon

Product Description

Loba's 2k Invisible Protect is an innovative 2-component water based surface coating that gives your floors the look and feel of natural untreated hardwood while offering all of the protection of a finished floor. This invisible protectant is extremely scratch-resistant and offers outstanding chemical and wear resistance in high traffic environments. It's high durability and easy cleaning make it the perfect surface treatment for lovers of natural wood!

• Suitable for wood and cork floors
• For heavy traffic residential areas and commercial use
• Meets the OSHA requirements for walking surfaces of 0.5 (ASTM D2047-04)
• Looks and feels like natural untreated wood
• Very easy to to apply
• Increased anti-slip properties
• No polishing
• Excellent chemical resistance
• As easy to clean as varnished surface
• Non ambering, keeps the natural appearance of the wood
• 1 US gallon plastic container

Coverage
LOBA Roller Deluxe 120: apply at 325-375 square feet per gallon per coat.
LOBA Roller Microfiber 100/120: apply at 400-500 square feet per gallon per coat.

Recommended Procedure For 2 coat application:
• Apply 2K InvisibleProtect using the LOBA Roller Deluxe 120.
• Allow to dry for 4-6 hours minimum.
• Intermediate sanding with LOBASAND 180 grit perforated pad (or equivalent) to remove grain raise.
• Vacuum floor then tack using a LOBA Mop and a new/clean LOBA microfiber mop pad lightly dampened with water to remove all dust.
• Apply 2K InvisibleProtectusing the LOBA Roller Deluxe 120.
• NOTE: An optional third coat can be applied using the LOBA Roller Deluxe 120 and the procedures listed below for a 3
coat application can be followed.

Recommended Procedure For 3 coat application using the LOBA Microfiber 100-120 roller:
• Apply 2K InvisibleProtect using the LOBA Roller Microfiber 100-120.
• Allow to dry for 2-4 hours minimum.
• Apply 2K InvisibleProtect using the LOBA Roller Microfiber 100-120.
• Allow to dry overnight.
• Intermediate sanding with LOBASAND 180 grit perforated pad (or equivalent) to remove grain raise.
• Vacuum floor then tack using a LOBA Mop and a new/clean LOBA microfiber mop pad lightly dampened with water to
remove all dust. Apply 2K InvisibleProtect using the LOBA Roller Microfiber 100-120.