Product Description
Bona Craft Oil 2K Soap - Size = 1 Liter
Concentrate. 1 liter makes 10 gallons of cleaner/conditioner.
Two year shelf life. STORAGE: Bona Craft Oil Soap should be stored in a climate-controlled environment. KEEP FROM FREEZING. Do not store above 100Ëš F.
After mixing with water, your cost per quart of cleaner is approximately $1.00 per quart - substantially cheaper than big box store cleaners which are not the best option for your Bona coated floor.
Applicators – Bona Microfiber Cleaning Pad and mop. For professional application you may use a 175 rpm buffer and white polishing pad or the Bona PowerScrubber™.
Gently and safely remove dirt, grime and marks from oiled hardwood floors with Bona Craft Oil 2K Soap. This specially formulated concentrate cleans and nourishes the surface.
Ingredients: Water, soap, natural waxes, tetrasodium EDTA
Bona Craft Oil 2K Soap can be used to clean Bona Craft Oil 2K or any natural penetrating oil. Product results may vary widely. ALWAYS PREPARE A SAMPLE OR TEST AREA TO DETERMINE COMPATIBILITY, APPEARANCE AND DESIRED RESULTS.
MIXING INSTRUCTIONS: SHAKE WELL BEFORE USING. Add 2-3 ounces of Bona Craft Oil 2K
Soap to one (1) gallon of water. For use with the Bona PowerScrubber™. Dilute Bona Craft Oil 2K
Soap by adding 5-8 ounces of concentrate to the solution tank then fill the remainder of the tank
with water.
APPLICATION: Directions for use: Option 1: Dampen microfiber pad in Bona Craft Oil 2K Soap
solution and clean floor. Rinse or change out microfiber pad every 100-200 feet for best results.
Option 2: Use a 175 rpm buffer and a white polishing pad to thoroughly clean the floor. Use as little
cleaning solution as possible to avoid floor damage. Option 3: For use with the Bona
PowerScrubber™ and white brushes. For most wood floors one or two cleaning passes will
thoroughly clean the floor. For heavily soiled areas more passes may be needed to remove ground
dirt. Wet tack entire floor to remove any drips or wet spots the PowerScrubber™ may have missed.
CLEAN-UP: Application tools should be cleaned with water
