Product Description
Loba's 2k Invisible Protect is an innovative 2-component water based surface coating that gives your floors the look and feel of natural untreated hardwood while offering all of the protection of a finished floor. This invisible protectant is extremely scratch-resistant and offers outstanding chemical and wear resistance in high traffic environments. It's high durability and easy cleaning make it the perfect surface treatment for lovers of natural wood!
- Suitable for wood and cork floors
- For heavy traffic residential areas and commercial use
- Meets the OSHA requirements for walking surfaces of 0.5 (ASTM D2047-04)
- Looks and feels like natural untreated wood
- Very easy to to apply
- Increased anti-slip properties
- No polishing
- Excellent chemical resistance
- As easy to clean as varnished surface
- Non ambering, keeps the natural appearance of the wood
- 1 US gallon plastic container
Coverage
LOBA Roller Deluxe 120: apply at 325-375 square feet per gallon per coat.
LOBA Roller Microfiber 100/120: apply at 400-500 square feet per gallon per coat.
Recommended Procedure For 2 coat application:
• Apply 2K InvisibleProtect A.T using the LOBA Roller Deluxe 120.
• Allow to dry for 4-6 hours minimum.
• Intermediate sanding with LOBASAND 180 grit perforated pad (or equivalent) to remove grain raise.
• Vacuum floor then tack using a LOBA Mop and a new/clean LOBA microfiber mop pad lightly dampened with water to remove all dust.
• Apply 2K InvisibleProtect A.T using the LOBA Roller Deluxe 120.
• NOTE: An optional third coat can be applied using the LOBA Roller Deluxe 120 and the procedures listed below for a 3
coat application can be followed.
Recommended Procedure For 3 coat application using the LOBA Microfiber 100-120 roller:
• Apply 2K InvisibleProtect A.T using the LOBA Roller Microfiber 100-120.
• Allow to dry for 2-4 hours minimum.
• Apply 2K InvisibleProtect A.T using the LOBA Roller Microfiber 100-120.
• Allow to dry overnight.
• Intermediate sanding with LOBASAND 180 grit perforated pad (or equivalent) to remove grain raise.
• Vacuum floor then tack using a LOBA Mop and a new/clean LOBA microfiber mop pad lightly dampened with water to
remove all dust. Apply 2K InvisibleProtect A.T using the LOBA Roller Microfiber 100-120.
