Product Description
WOCA Oil Refresher is used for regular cleaning and maintenance of oiled wood floors. WOCA Oil Refresher Natural is typically used for natural oiled and color oiled floors and WOCA Oil Refresher White for white oiled wood. WOCA Oil Refresher combines efficient cleaning with simultaneous re-oiling. The oil penetrates into the wood and provides the surface with a protective matte film. The use of WOCA Oil Refresher will extend the life of the oil finish, therefore, extending the periodic oil maintenance application.
About this item
- PROTECTS & NOURISHES – Cleans and nourishes the natural oiled finish of your wood, increasing the protection from stains, water and household chemicals. Natural Color for all wood tones and White Color for white colored oil finishes
- EASY TO USE – Just pour 2 capfuls in the mop reservoir and top off the reservoir with warm water in our WOCA Spray Mop or add 6oz per gallon of warm water and use a WOCA Swep Twist Mop.
- CONCENTRATED - 1L container makes 5-1/2 gallons of Oil Refresher. 2.5L container makes almost 14 gallons of Oil Refresher.
- QUARTERLY MAINTAINENCE – Designed to be used for quarterly maintenance of your oiled wood surfaces. Great for use on UV pre-finished oil, hardwax oiled, tung oiled, Danish oiled or penetrating oiled wood surfaces.
- ECO-FRIENDLY- This plant-based cleaner is certified by European standard EN 71 to meet the safety requirement for children’s toys as well as the requirements to attain the Indoor Climate Label
How to use Oil Refreshing Soap
- Shake the container well and pour the care product into a plastic bucket. It is important that no pigments are left in the container. Stir regularly during the application to prevent the pigments from settling to the bottom.
- Mix Oil Refreshing Soap with lukewarm water: – For traditionally oiled floors: 1:20 (250 ml soap into 5 L of water). – For UV-oiled and oil-waxed floors: 1:40 (125 ml soap into 5 L of water). The mixture ratio can vary depending on wear.
- Wipe the floor lengthwise with the care product. It is recommended to clean an area of 10 m² at a time .
- Leave the surface to dry for 2-3 hours at 20°C before use.
- If a light shine is wanted, polish the dry floor with a white pad.
For best results, use two buckets: one with soap water and the second with clean water to rinse the dirty mop. See technical data sheet for further information.
Use WOCA Wood Stain Remover or WOCA Intensive Wood Cleaner for particular stubborn stains before cleaning and maintaining with Oil Refreshing Soap.
Always remember to test on a less visible spot to check the compatibility of the surface with the product.
