albert floorotex

Manufacturer: Floorotex
Product ID: FLOOROTEX280
Price: $105.00
QTY Add to cart

1 Roll = 280 sq. ft. 

albert floorotex is a slightly adherent mat with a breathable protective film. It is suitable for the temporary protection of parquet, hardwood, laminate, and ceramic floors as well as carpets. The 2 mm thick nonwoven material protects the floor against scratches and imprints. The underside contains a special adhesive which prevents the nonwoven material from slipping.The top blue surface protects the floor against spillage. Residual moisture remaining on the flooring can nevertheless escape through the membrane (Gortex-effect).

For more information, visit the manufacturer's website here.

  • Turn-off floor heating before laying down rolls
  • The rolls should be laid down with an overlapping on each side by about 10cm (4 inches)
  • Protect against direct solar radiation
  • The areas to be covered must be dry underneath the breathable surface protective roll
  • The floor protective film cannot endure a permanent pressure of more than 100 kg/m� for more than 24 hours
  • Waiting period for laying:
    • Follow the manufacturer�s guidelines for complete curing times. Due to variable site conditions, a site test should also be done to ensure floor is cured.  
    • Never use the mat earlier than 72 h after the final coat has been applied.
    • Room temperature 10� � 25�C
    • Allowable room humidity 50% � 60%
    • Waterproof but still breathable � water cannot go through and underlying moisture does not get trapped
    • Protects � against scratches and other damage
    • Anti-skid � mat cannot slip � no need for any tape at the sides
    • Very strong material � does not tear
    • Reusable � can be used several times

albert floorotex - 2 Pack ($100/Per Roll)

Manufacturer: Floorotex
Product ID: FLOOROTEX280-2PK
Price: $200.00
QTY Add to cart

1 Roll = 280 sq. ft.

albert floorotex is a slightly adherent mat with a breathable protective film. It is suitable for the temporary protection of parquet, hardwood, laminate, and ceramic floors as well as carpets. The 2 mm thick nonwoven material protects the floor against scratches and imprints. The underside contains a special adhesive which prevents the nonwoven material from slipping.The top blue surface protects the floor against spillage. Residual moisture remaining on the flooring can nevertheless escape through the membrane (Gortex-effect).

For more information, visit the manufacturer's website here.

  • Turn-off floor heating before laying down rolls
  • The rolls should be laid down with an overlapping on each side by about 10cm (4 inches)
  • Protect against direct solar radiation
  • The areas to be covered must be dry underneath the breathable surface protective roll
  • The floor protective film cannot endure a permanent pressure of more than 100 kg/m� for more than 24 hours
  • Waiting period for laying:
    • Follow the manufacturer�s guidelines for complete curing times. Due to variable site conditions, a site test should also be done to ensure floor is cured.  
    • Never use the mat earlier than 72 h after the final coat has been applied.
    • Room temperature 10� � 25�C
    • Allowable room humidity 50% � 60%
    • Waterproof but still breathable ï¿½ water cannot go through and underlying moisture does not get trapped
    • Protects ï¿½ against scratches and other damage
    • Anti-skid ï¿½ mat cannot slip � no need for any tape at the sides
    • Very strong material ï¿½ does not tear
    • Reusable ï¿½ can be used several times

albert floorotex - 4 Pack ($95/Per Roll)

Manufacturer: Floorotex
Product ID: FLOOROTEX280-4PK
Price: $380.00
QTY Add to cart

1 Roll = 280 sq. ft.

albert floorotex is a slightly adherent mat with a breathable protective film. It is suitable for the temporary protection of parquet, hardwood, laminate, and ceramic floors as well as carpets. The 2 mm thick nonwoven material protects the floor against scratches and imprints. The underside contains a special adhesive which prevents the nonwoven material from slipping.The top blue surface protects the floor against spillage. Residual moisture remaining on the flooring can nevertheless escape through the membrane (Gortex-effect).

For more information, visit the manufacturer's website here.

  • Turn-off floor heating before laying down rolls
  • The rolls should be laid down with an overlapping on each side by about 10cm (4 inches)
  • Protect against direct solar radiation
  • The areas to be covered must be dry underneath the breathable surface protective roll
  • The floor protective film cannot endure a permanent pressure of more than 100 kg/m� for more than 24 hours
  • Waiting period for laying:
    • Follow the manufacturer�s guidelines for complete curing times. Due to variable site conditions, a site test should also be done to ensure floor is cured.  
    • Never use the mat earlier than 72 h after the final coat has been applied.
    • Room temperature 10� � 25�C
    • Allowable room humidity 50% � 60%
    • Waterproof but still breathable ï¿½ water cannot go through and underlying moisture does not get trapped
    • Protects ï¿½ against scratches and other damage
    • Anti-skid ï¿½ mat cannot slip � no need for any tape at the sides
    • Very strong material ï¿½ does not tear
    • Reusable ï¿½ can be used several times