Liquid Nails Extreme Heavy Duty - 10 oz.

Manufacturer: Liquid Nails (PPG)
Product ID: LN-907
Price: $3.34
QTY Add to cart
Extreme Heavy Duty (LN-907)
Extreme Heavy Duty Construction Adhesive is an interior/exterior grade, low-solvent, high-strength construction adhesive designed to provide outstanding adhesion and durability in bonded assemblies. The extreme formula touts the ability to perform in extreme conditions, bonding in temperatures from 22⁰ F to 120⁰ F. This enables professional contractors and avid DIY-ers to work in the extreme heat or cold and get their job done regardless of the weather.
 

Recommended For:

many exterior and interior heavy duty applications including Plywood, Waferboard, Cementboard, Particleboard, Treated Lumber, Drywall, Brick Veneers (Interior Only), Imitation Stone (Interior Only), Tileboard, Foamboard, Ceiling Tiles and most common building materials (concrete, lumber, etc.).

NOT Recommended For:

Plastics, vinyl, ceramics, mirrors, granite, marble installing tileboard directly to studding, and wood or laminate flooring.

Directions

Surfaces must be clean, dry and structurally sound. Paneling must be conditioned per Manufacturer’s instructions. Research all installation instructions and read label for safety, health, and environmental information. Place in caulk gun, cut nozzle, and puncture inner seal with nail or wire. Cabinets and Countertops: Apply ¼” bead to contact areas. Press into place. Mechanical fasteners must also be used for wall cabinets. Furring Strips or Studs: Apply ¼” zigzag bead to each strip or stud. Press into place. Use nails at top and bottom. Drywall: Apply ¼” zigzag bead to each stud. Press drywall into place. Position panels so that edges meet at stud center. Nail as required. Subfloors: Apply ¼” bead to joists. Press subflooring into place and nail or screw every six inches around panel perimeter and every 12” into joists in field of the panel.

Key Features

  • Bonds in extreme temperatures (22⁰ F to 120⁰ F)
  • 200% stronger than fasteners alone
  • Low solvent, high-strength formula
  • Outstanding adhesion and durability
  • All-season performance, no down time

Available Sizes

  • 10 fl. oz. cartridge
  • 11 fl. oz. cartridge

Coverage

  • Using a 1/4" (.64 cm) bead: 10 fl. oz. cartridge covers 30 linear ft.

Liquid Nails Polyurethane Adhesive - 10 oz.

Manufacturer: Liquid Nails (PPG)
Product ID: LN-950
Price: $4.10
QTY Add to cart
Liquid Nails Polyurethane Adhesive (LN-950)
 
This polyurethane construction adhesive (a low-VOC "green glue") offers excellent weather resistance and low-temperature flexibility for a strong bond both indoors and outdoors and on a wide range of materials and surfaces.
 

Recommended For:

 

 

bonding building materials (concrete, lumber, etc.) to subfloors, tileboard, treated lumber, cabinets, foamboard, countertops, granite, marble, drywall, ceramics, mirrors, plastic, vinyl, 1/8" MDF paneling, brick veneers, plywood and waferboard.

NOT Recommended For:

ceiling tile.

Key Features

Available Sizes

  • 10 fl. oz. cartridge

Coverage

  • Using a 1/4" (.64 cm) bead: 10 fl. oz. cartridge covers 30 lineal ft.

Liquid Nails Heavy Duty Construction Adhesive - 10 oz.

Manufacturer: Liquid Nails (PPG)
Product ID: LN-903
Price: $1.73
QTY Add to cart
Heavy Duty Construction Adhesive (Low-VOC) (LN-903)
 
This construction adhesive is specially formulated to provide professionals and do-it-yourselfers with excellent exterior/interior adhesion. It's also considered a "green glue" because it is low-VOC.
 

Recommended For:

 

many exterior and interior heavy duty applications including countertops, cabinets, brick veneer, plywood and waferboard, foil insulation board, tileboard, treated lumber, drywall and most common building materials (concrete, lumber, etc.).

NOT Recommended For:

flooring applications, ceramics, mirrors, granite, marble, plastic or vinyl.

Key Features

Available Sizes

  • 28 fl. oz. cartridge
  • 10 fl. oz. cartridge
  • 1 Gal. can
  • 1 Quart can

Coverage

  • Using a 1/4" (.64 cm) bead: 28 fl. oz. cartridge covers 88 lineal ft.
  • Using a 1/4" (.64 cm) bead: 10 fl. oz. cartridge covers 30 lineal ft.
  • 1 Gal. can covers 60 to 90 sq. ft.
  • 1 Quart can covers 15 to 22 sq. ft.

Liquid Nails Heavy Duty Construction Adhesive - 28 oz.

Manufacturer: Liquid Nails (PPG)
Product ID: LNP-903
Price: $5.12
QTY Add to cart
Heavy Duty Construction Adhesive (Low-VOC) (LNP-903)
 
This construction adhesive is specially formulated to provide professionals and do-it-yourselfers with excellent exterior/interior adhesion. It's also considered a "green glue" because it is low-VOC.
 

Recommended For:

 

many exterior and interior heavy duty applications including countertops, cabinets, brick veneer, plywood and waferboard, foil insulation board, tileboard, treated lumber, drywall and most common building materials (concrete, lumber, etc.).

NOT Recommended For:

flooring applications, ceramics, mirrors, granite, marble, plastic or vinyl.

Key Features

Available Sizes

  • 28 fl. oz. cartridge
  • 10 fl. oz. cartridge
  • 1 Gal. can
  • 1 Quart can

Coverage

  • Using a 1/4" (.64 cm) bead: 28 fl. oz. cartridge covers 88 lineal ft.
  • Using a 1/4" (.64 cm) bead: 10 fl. oz. cartridge covers 30 lineal ft.
  • 1 Gal. can covers 60 to 90 sq. ft.
  • 1 Quart can covers 15 to 22 sq. ft.

Liquid Nails Subfloor Adhesive - 10 oz.

Manufacturer: Liquid Nails (PPG)
Product ID: LN-902
Price: $3.09
QTY Add to cart
Subfloor & Deck Construction Adhesive (Low-VOC) (LN-902)
 
This low temperature and high temperature adhesive offers superior quality compared to typical exterior/interior heavy duty construction adhesive, gunning in temperatures as low as 22° and as high as 120°. Is is appropriate for subfloors and most common building materials, even wet or frozen lumber. It's also appropriate for foamboard because it is a latex-based construction adhesive and contains no solvents that could attack foam. The exceptional, low-VOC construction adhesive bridges gaps up to 3/8" and provides an open time of 20 minutes.
 

Recommended For:

 

increasing the structural integrity of walls and subfloor systems using plywood, waferboard, lumber and treated lumber, particleboard and foamboard.

NOT Recommended For:

bonding underlayment directly to concrete or for uses other than subfloor, deck and wall system installation.

Key Features

Available Sizes

  • 28 fl. oz. cartridge
  • 10 fl. oz. cartridge

Coverage

  • 28 fl. oz. cartridge covers 88 lineal ft.
  • Using a 1/4" (.64 cm) bead: 10 fl. oz. cartridge covers 30 lineal ft.

Liquid Nails Subfloor Adhesive - 28 oz.

Manufacturer: Liquid Nails (PPG)
Product ID: LNP-902
Price: $3.60
QTY Add to cart
Subfloor & Deck Construction Adhesive (Low-VOC) (LNP-902)
 
This low temperature and high temperature adhesive offers superior quality compared to typical exterior/interior heavy duty construction adhesive, gunning in temperatures as low as 22° and as high as 120°. Is is appropriate for subfloors and most common building materials, even wet or frozen lumber. It's also appropriate for foamboard because it is a latex-based construction adhesive and contains no solvents that could attack foam. The exceptional, low-VOC construction adhesive bridges gaps up to 3/8" and provides an open time of 20 minutes.
 

Recommended For:

 

increasing the structural integrity of walls and subfloor systems using plywood, waferboard, lumber and treated lumber, particleboard and foamboard.

NOT Recommended For:

bonding underlayment directly to concrete or for uses other than subfloor, deck and wall system installation.

Key Features

Available Sizes

  • 28 fl. oz. cartridge
  • 10 fl. oz. cartridge

Coverage

  • 28 fl. oz. cartridge covers 88 lineal ft.
  • Using a 1/4" (.64 cm) bead: 10 fl. oz. cartridge covers 30 lineal ft.