DuraSeal Gymthane Sealer-Gloss 5 Gallon Pail

Manufacturer: DuraSeal
Product ID: 85320
Price: $148.19
QTY Add to cart

A superior quality, high gloss polyurethane finish designed specifically for gymnasium floors. The DURA SEAL ™ GYMTHANE™ Sealer and Finish System resists rubber marks and scuffing and is easily maintained.

PDF Gymthane - Material Safety Data Sheet

 

PHYSICAL PROPERTIES:

 

NON-VOLATILE CONTENT 45%
VOLATILE CONTENT (RULE 66) 55%
RESISTANCE TO SKINNING No Skinning
COLOR No. 11 Gardner
DRY FILM COLOR No Darkening
PACKAGE STABILITY No Sediment, No Darkening
FLASH POINT 103°F
DRY TIME Dry to touch less than 3 Hours
    Dry Hard 7 Hours
    No Tack After 24 Hours
ABRASION RESISTANCE Sand
SWARD HARDNESS 52
COEFFICENT 125
FLEXIBILITY Passes 1/8" Mandrell Bend
TENSILE STRENGTH 100 psi


 

Preparation:
1. Properly prepare surface according to NOFMA OR NWFA approved methods. Screen using No.100 disc for final cut.
2. Remove all dust with a broom and/or vacuum and tack surface with a clean cloth moistened with mineral spirits.

Sealer Application:
1. Apply one coat of GYMTHANE Sealer with a lambswool applicator at a coverage rate of 500 square feet per gallon.
2. Allow to dry at least 8 hours.
3. Screen using No.100 disc.
4. Tack with a clean cloth moistened with mineral spirits to remove all dust.

Game Line Application:
1. Apply Fuller O~Brien® Versaflex (Oil Based) or Fuller O'Brien® Ultra Color (Oil Based) accordingly to label directions.
2. Allow to dry thoroughly.
3. Screen surface with a No.120 screen or finer.
4. Tack surface with a cloth dampened with mineral spirits to remove all dust.

Finish Application:
1. Apply first coat of GYMTHANE Finish with a lam bswool applicator at a coverage rate of 500 square feet per gallon.
2. Allow to dry at least 8 hours.
3. Screen with No.100 disc screen.
4. Tack with a clean cloth moistened with mineral spirits to remove all dust.
5. Apply a second coat of GYMTHANE Finish in the same manner as the first.

PRODUCT PROPERTIES:

DRY TIME & CURE Approximately 8 hours. Allow to dry overnight for light traffic; 48 hours for heavy traffic. Note: Drying time will be increased by high humidity, low temperature, lack of air movement or applying too heavily.
COVERAGE Approximately 500 square feet per gallon.
CLEAN UP Clean application tools with warm water immediately after use.
MAINTENANCE Sweep or dry dust mop floors daily. Stubborn rubber marks and stains may be removed using DURA SEALHardwood Floor Cleaner according to label directions. Occasional buffing with a polishing machine will renew luster.
SOLVENT Non-photochemically reactive.
 

DuraSeal Gymthane- Gloss 5 Gallon Pail - 550 VOC

Manufacturer: DuraSeal
Product ID: 85321
Price: $155.00
QTY Add to cart

A superior quality, high gloss polyurethane finish designed specifically for gymnasium floors. The DURA SEAL ™ GYMTHANE™ Sealer and Finish System resists rubber marks and scuffing and is easily maintained.

PDF Gymthane - Material Safety Data Sheet

 

PHYSICAL PROPERTIES:

 

NON-VOLATILE CONTENT 45%
VOLATILE CONTENT (RULE 66) 55%
RESISTANCE TO SKINNING No Skinning
COLOR No. 11 Gardner
DRY FILM COLOR No Darkening
PACKAGE STABILITY No Sediment, No Darkening
FLASH POINT 103°F
DRY TIME Dry to touch less than 3 Hours
    Dry Hard 7 Hours
    No Tack After 24 Hours
ABRASION RESISTANCE Sand
SWARD HARDNESS 52
COEFFICENT 125
FLEXIBILITY Passes 1/8" Mandrell Bend
TENSILE STRENGTH 100 psi


 

Preparation:
1. Properly prepare surface according to NOFMA OR NWFA approved methods. Screen using No.100 disc for final cut.
2. Remove all dust with a broom and/or vacuum and tack surface with a clean cloth moistened with mineral spirits.

Sealer Application:
1. Apply one coat of GYMTHANE Sealer with a lambswool applicator at a coverage rate of 500 square feet per gallon.
2. Allow to dry at least 8 hours.
3. Screen using No.100 disc.
4. Tack with a clean cloth moistened with mineral spirits to remove all dust.

Game Line Application:
1. Apply Fuller O~Brien® Versaflex (Oil Based) or Fuller O'Brien® Ultra Color (Oil Based) accordingly to label directions.
2. Allow to dry thoroughly.
3. Screen surface with a No.120 screen or finer.
4. Tack surface with a cloth dampened with mineral spirits to remove all dust.

Finish Application:
1. Apply first coat of GYMTHANE Finish with a lam bswool applicator at a coverage rate of 500 square feet per gallon.
2. Allow to dry at least 8 hours.
3. Screen with No.100 disc screen.
4. Tack with a clean cloth moistened with mineral spirits to remove all dust.
5. Apply a second coat of GYMTHANE Finish in the same manner as the first.

PRODUCT PROPERTIES:

DRY TIME & CURE Approximately 8 hours. Allow to dry overnight for light traffic; 48 hours for heavy traffic. Note: Drying time will be increased by high humidity, low temperature, lack of air movement or applying too heavily.
COVERAGE Approximately 500 square feet per gallon.
CLEAN UP Clean application tools with warm water immediately after use.
MAINTENANCE Sweep or dry dust mop floors daily. Stubborn rubber marks and stains may be removed using DURA SEALHardwood Floor Cleaner according to label directions. Occasional buffing with a polishing machine will renew luster.
SOLVENT Non-photochemically reactive.