DuraSeal Quick Coat Stain - Antique Brown Quart

Manufacturer: DuraSeal
Product ID: 861160000
Price: $16.49
QTY Add to cart
DuraSeal Quick Coat Penetrating Finish
Antique Brown Quart
 
DuraSeal Quick Coat Penetrating Finish is a semi-transparent stain. This product is formulated to seal, color and provide exceptional durability when used on bare wood or masonry surfaces. This rich blend of oil and resin gives hardwood floors a soft, satiny sheen. Its unique formulation provides a surface that can be topcoated in two hours. DuraSeal Quick Coat Penetrating Finish is available in existing DuraSeal colors as well as many Certified Minwax colors. It can be used with or without a finish coat, and is compatible with all DuraSeal  water-borne and oil-modified finish system.


Materials Check-list:
  • To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Please click the "Materials" tab  to locate the materials check-list for a list of the recommended  tools.

Color:

  • DuraSeal Quick Coat Penetrating Finish gives hardwood floors a soft, satiny sheen. 

Coverage:

  • DuraSeal Quick Coat Penetrating Finish covers approximately 500 square feet per gallon. While a second coat is optional, this product will cover approximately 800 square feet per gallon. 

Dry Time and Cure:

  • DuraSeal Quick Coat Penetrating Finish dries in approximately 2-3 hours. Note: Dry time is based on conditions of 77 F and 50% relative humidity. 

Clean-up:

  • Clean equipment using paint thinner or mineral spirits.

Storage:

  • Always store at room temperature. If stored at high temperature, cool to room temperature before use. Keep from freezing. 

Application Hints:

  • Read the "HOW TO" tab of this listing for application hints.

Surface Preparation:

  1. Properly prepare surface according to NWFA approved methods. Use a No. 100 grit screen for the final screening cut. 
  2. Remove all dust  with a broom and/or vacuum and tack the surface with a clean cloth moistened with mineral spirits. 

Application:

  1. Stir or shake material thoroughly before and occasionally during use. Apply a test sample on  a small inconspicuous area before proceeding with the entire job. If desired DuraSeal Quick Coat Penetrating Finish in Neutral can be used to lighten any standard DuraSeal wood tone.
  2. Apply the first coat of DuraSeal Quick Coat Penetrating Finish liberally with a brush, lamb wool applicator or cloth at a coverage rate of approximately 500 square feet per gallon.
  3. Allow to penetrate for 5-8 minutes then remove any excess by wiping with rags or by buffing with #2 steel wool. Removal of all excess material is essential to ensure proper dry time and adhesion of the finish coat. 
  4. If desired, apply a thin second coat at a coverage rate of approximately 800 square feet per gallon. Allow to penetrate and remove excess material in the same manner as the first coat [step 3 above].
  5. Allow the final coat to dry at least 2 hours and apply a DuraSeal finish coat of your choice. 

Maintenance:

  • Regularly remove dust  and dirt by sweeping or vacuuming. Periodic buffing will renew luster. Exceptionally worn areas may require an additional finish coat. Maintained floors sealed only with DuraSeal Quick Coat Penetrating Finish with DuraSeal Renovator Cleaner and Reconditioner.
Materials Check-list:

To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Listed below are a few recommended tools.

(MSDS)

(PDS)

(California Prop 65 Labeling Requirements)

Click the link below to see a short video of this product in use and for some ideas for how to get the best results. 

DuraSeal Quick Coat Stain - Cherry Quart

Manufacturer: DuraSeal
Product ID: 861350000
Price: $16.49
QTY Add to cart
DuraSeal Quick Coat Penetrating Finish
Cherry Quart
 
DuraSeal Quick Coat Penetrating Finish is a semi-transparent stain. This product is formulated to seal, color and provide exceptional durability when used on bare wood or masonry surfaces. This rich blend of oil and resin gives hardwood floors a soft, satiny sheen. Its unique formulation provides a surface that can be topcoated in two hours. DuraSeal Quick Coat Penetrating Finish is available in existing DuraSeal colors as well as many Certified Minwax colors. It can be used with or without a finish coat, and is compatible with all DuraSeal  water-borne and oil-modified finish system.


Materials Check-list:
  • To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Please click the "Materials" tab  to locate the materials check-list for a list of the recommended  tools.

Color:

  • DuraSeal Quick Coat Penetrating Finish gives hardwood floors a soft, satiny sheen. 

Coverage:

  • DuraSeal Quick Coat Penetrating Finish covers approximately 500 square feet per gallon. While a second coat is optional, this product will cover approximately 800 square feet per gallon. 

Dry Time and Cure:

  • DuraSeal Quick Coat Penetrating Finish dries in approximately 2-3 hours. Note: Dry time is based on conditions of 77 F and 50% relative humidity. 

Clean-up:

  • Clean equipment using paint thinner or mineral spirits.

Storage:

  • Always store at room temperature. If stored at high temperature, cool to room temperature before use. Keep from freezing. 

Application Hints:

  • Read the "HOW TO" tab of this listing for application hints.

Surface Preparation:

  1. Properly prepare surface according to NWFA approved methods. Use a No. 100 grit screen for the final screening cut. 
  2. Remove all dust  with a broom and/or vacuum and tack the surface with a clean cloth moistened with mineral spirits. 

Application:

  1. Stir or shake material thoroughly before and occasionally during use. Apply a test sample on  a small inconspicuous area before proceeding with the entire job. If desired DuraSeal Quick Coat Penetrating Finish in Neutral can be used to lighten any standard DuraSeal wood tone.
  2. Apply the first coat of DuraSeal Quick Coat Penetrating Finish liberally with a brush, lamb wool applicator or cloth at a coverage rate of approximately 500 square feet per gallon.
  3. Allow to penetrate for 5-8 minutes then remove any excess by wiping with rags or by buffing with #2 steel wool. Removal of all excess material is essential to ensure proper dry time and adhesion of the finish coat. 
  4. If desired, apply a thin second coat at a coverage rate of approximately 800 square feet per gallon. Allow to penetrate and remove excess material in the same manner as the first coat [step 3 above].
  5. Allow the final coat to dry at least 2 hours and apply a DuraSeal finish coat of your choice. 

Maintenance:

  • Regularly remove dust  and dirt by sweeping or vacuuming. Periodic buffing will renew luster. Exceptionally worn areas may require an additional finish coat. Maintained floors sealed only with DuraSeal Quick Coat Penetrating Finish with DuraSeal Renovator Cleaner and Reconditioner.
Materials Check-list:

To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Listed below are a few recommended tools.

(MSDS)

(PDS)

(California Prop 65 Labeling Requirements)

Click the link below to see a short video of this product in use and for some ideas for how to get the best results. 

DuraSeal Quick Coat Stain - Chestnut Quart

Manufacturer: DuraSeal
Product ID: 861040000
Price: $16.49
QTY Add to cart
DuraSeal Quick Coat Penetrating Finish
Chestnut Quart
 
DuraSeal Quick Coat Penetrating Finish is a semi-transparent stain. This product is formulated to seal, color and provide exceptional durability when used on bare wood or masonry surfaces. This rich blend of oil and resin gives hardwood floors a soft, satiny sheen. Its unique formulation provides a surface that can be topcoated in two hours. DuraSeal Quick Coat Penetrating Finish is available in existing DuraSeal colors as well as many Certified Minwax colors. It can be used with or without a finish coat, and is compatible with all DuraSeal  water-borne and oil-modified finish system.


Materials Check-list:
  • To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Please click the "Materials" tab  to locate the materials check-list for a list of the recommended  tools.

Color:

  • DuraSeal Quick Coat Penetrating Finish gives hardwood floors a soft, satiny sheen. 

Coverage:

  • DuraSeal Quick Coat Penetrating Finish covers approximately 500 square feet per gallon. While a second coat is optional, this product will cover approximately 800 square feet per gallon. 

Dry Time and Cure:

  • DuraSeal Quick Coat Penetrating Finish dries in approximately 2-3 hours. Note: Dry time is based on conditions of 77 F and 50% relative humidity. 

Clean-up:

  • Clean equipment using paint thinner or mineral spirits.

Storage:

  • Always store at room temperature. If stored at high temperature, cool to room temperature before use. Keep from freezing. 

Application Hints:

  • Read the "HOW TO" tab of this listing for application hints.

Surface Preparation:

  1. Properly prepare surface according to NWFA approved methods. Use a No. 100 grit screen for the final screening cut. 
  2. Remove all dust  with a broom and/or vacuum and tack the surface with a clean cloth moistened with mineral spirits. 

Application:

  1. Stir or shake material thoroughly before and occasionally during use. Apply a test sample on  a small inconspicuous area before proceeding with the entire job. If desired DuraSeal Quick Coat Penetrating Finish in Neutral can be used to lighten any standard DuraSeal wood tone.
  2. Apply the first coat of DuraSeal Quick Coat Penetrating Finish liberally with a brush, lamb wool applicator or cloth at a coverage rate of approximately 500 square feet per gallon.
  3. Allow to penetrate for 5-8 minutes then remove any excess by wiping with rags or by buffing with #2 steel wool. Removal of all excess material is essential to ensure proper dry time and adhesion of the finish coat. 
  4. If desired, apply a thin second coat at a coverage rate of approximately 800 square feet per gallon. Allow to penetrate and remove excess material in the same manner as the first coat [step 3 above].
  5. Allow the final coat to dry at least 2 hours and apply a DuraSeal finish coat of your choice. 

Maintenance:

  • Regularly remove dust  and dirt by sweeping or vacuuming. Periodic buffing will renew luster. Exceptionally worn areas may require an additional finish coat. Maintained floors sealed only with DuraSeal Quick Coat Penetrating Finish with DuraSeal Renovator Cleaner and Reconditioner.
Materials Check-list:

To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Listed below are a few recommended tools.

(MSDS)

(PDS)

(California Prop 65 Labeling Requirements)

Click the link below to see a short video of this product in use and for some ideas for how to get the best results. 

DuraSeal Quick Coat Stain - Classic Grey/Gray Quart

Manufacturer: DuraSeal
Product ID: 861720000
Price: $16.49
QTY Add to cart
DuraSeal Quick Coat Penetrating Finish
Classic Grey/Gray Quart
 
DuraSeal Quick Coat Penetrating Finish is a semi-transparent stain. This product is formulated to seal, color and provide exceptional durability when used on bare wood or masonry surfaces. This rich blend of oil and resin gives hardwood floors a soft, satiny sheen. Its unique formulation provides a surface that can be topcoated in two hours. DuraSeal Quick Coat Penetrating Finish is available in existing DuraSeal colors as well as many Certified Minwax colors. It can be used with or without a finish coat, and is compatible with all DuraSeal  water-borne and oil-modified finish system.
Materials Check-list:
  • To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Please click the "Materials" tab  to locate the materials check-list for a list of the recommended  tools.

Color:

  • DuraSeal Quick Coat Penetrating Finish gives hardwood floors a soft, satiny sheen. 

Coverage:

  • DuraSeal Quick Coat Penetrating Finish covers approximately 500 square feet per gallon. While a second coat is optional, this product will cover approximately 800 square feet per gallon. 

Dry Time and Cure:

  • DuraSeal Quick Coat Penetrating Finish dries in approximately 2-3 hours. Note: Dry time is based on conditions of 77 F and 50% relative humidity. 

Clean-up:

  • Clean equipment using paint thinner or mineral spirits.

Storage:

  • Always store at room temperature. If stored at high temperature, cool to room temperature before use. Keep from freezing. 

Application Hints:

  • Read the "HOW TO" tab of this listing for application hints.

Surface Preparation:

  1. Properly prepare surface according to NWFA approved methods. Use a No. 100 grit screen for the final screening cut. 
  2. Remove all dust  with a broom and/or vacuum and tack the surface with a clean cloth moistened with mineral spirits. 

Application:

  1. Stir or shake material thoroughly before and occasionally during use. Apply a test sample on  a small inconspicuous area before proceeding with the entire job. If desired DuraSeal Quick Coat Penetrating Finish in Neutral can be used to lighten any standard DuraSeal wood tone.
  2. Apply the first coat of DuraSeal Quick Coat Penetrating Finish liberally with a brush, lamb wool applicator or cloth at a coverage rate of approximately 500 square feet per gallon.
  3. Allow to penetrate for 5-8 minutes then remove any excess by wiping with rags or by buffing with #2 steel wool. Removal of all excess material is essential to ensure proper dry time and adhesion of the finish coat. 
  4. If desired, apply a thin second coat at a coverage rate of approximately 800 square feet per gallon. Allow to penetrate and remove excess material in the same manner as the first coat [step 3 above].
  5. Allow the final coat to dry at least 2 hours and apply a DuraSeal finish coat of your choice. 

Maintenance:

  • Regularly remove dust  and dirt by sweeping or vacuuming. Periodic buffing will renew luster. Exceptionally worn areas may require an additional finish coat. Maintained floors sealed only with DuraSeal Quick Coat Penetrating Finish with DuraSeal Renovator Cleaner and Reconditioner.
Materials Check-list:

To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Listed below are a few recommended tools.

(MSDS)

(PDS)

(California Prop 65 Labeling Requirements)

Click the link below to see a short video of this product in use and for some ideas for how to get the best results. 

DuraSeal Quick Coat Stain - Coffee Brown Quart

Manufacturer: DuraSeal
Product ID: 861230000
Price: $16.49
QTY Add to cart
DuraSeal Quick Coat Penetrating Finish
Coffee Brown Quart
 
DuraSeal Quick Coat Penetrating Finish is a semi-transparent stain. This product is formulated to seal, color and provide exceptional durability when used on bare wood or masonry surfaces. This rich blend of oil and resin gives hardwood floors a soft, satiny sheen. Its unique formulation provides a surface that can be topcoated in two hours. DuraSeal Quick Coat Penetrating Finish is available in existing DuraSeal colors as well as many Certified Minwax colors. It can be used with or without a finish coat, and is compatible with all DuraSeal  water-borne and oil-modified finish system.


Materials Check-list:
  • To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Please click the "Materials" tab  to locate the materials check-list for a list of the recommended  tools.

Color:

  • DuraSeal Quick Coat Penetrating Finish gives hardwood floors a soft, satiny sheen. 

Coverage:

  • DuraSeal Quick Coat Penetrating Finish covers approximately 500 square feet per gallon. While a second coat is optional, this product will cover approximately 800 square feet per gallon. 

Dry Time and Cure:

  • DuraSeal Quick Coat Penetrating Finish dries in approximately 2-3 hours. Note: Dry time is based on conditions of 77 F and 50% relative humidity. 

Clean-up:

  • Clean equipment using paint thinner or mineral spirits.

Storage:

  • Always store at room temperature. If stored at high temperature, cool to room temperature before use. Keep from freezing. 

Application Hints:

  • Read the "HOW TO" tab of this listing for application hints.

Surface Preparation:

  1. Properly prepare surface according to NWFA approved methods. Use a No. 100 grit screen for the final screening cut. 
  2. Remove all dust  with a broom and/or vacuum and tack the surface with a clean cloth moistened with mineral spirits. 

Application:

  1. Stir or shake material thoroughly before and occasionally during use. Apply a test sample on  a small inconspicuous area before proceeding with the entire job. If desired DuraSeal Quick Coat Penetrating Finish in Neutral can be used to lighten any standard DuraSeal wood tone.
  2. Apply the first coat of DuraSeal Quick Coat Penetrating Finish liberally with a brush, lamb wool applicator or cloth at a coverage rate of approximately 500 square feet per gallon.
  3. Allow to penetrate for 5-8 minutes then remove any excess by wiping with rags or by buffing with #2 steel wool. Removal of all excess material is essential to ensure proper dry time and adhesion of the finish coat. 
  4. If desired, apply a thin second coat at a coverage rate of approximately 800 square feet per gallon. Allow to penetrate and remove excess material in the same manner as the first coat [step 3 above].
  5. Allow the final coat to dry at least 2 hours and apply a DuraSeal finish coat of your choice. 

Maintenance:

  • Regularly remove dust  and dirt by sweeping or vacuuming. Periodic buffing will renew luster. Exceptionally worn areas may require an additional finish coat. Maintained floors sealed only with DuraSeal Quick Coat Penetrating Finish with DuraSeal Renovator Cleaner and Reconditioner.
Materials Check-list:

To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Listed below are a few recommended tools.

(MSDS)

(PDS)

(California Prop 65 Labeling Requirements)

Click the link below to see a short video of this product in use and for some ideas for how to get the best results. 

DuraSeal Quick Coat Stain - Colonial Maple Quart

Manufacturer: DuraSeal
Product ID: 861400000
Price: $16.49
QTY Add to cart
DuraSeal Quick Coat Penetrating Finish
Colonial Maple Quart
 
DuraSeal Quick Coat Penetrating Finish is a semi-transparent stain. This product is formulated to seal, color and provide exceptional durability when used on bare wood or masonry surfaces. This rich blend of oil and resin gives hardwood floors a soft, satiny sheen. Its unique formulation provides a surface that can be topcoated in two hours. DuraSeal Quick Coat Penetrating Finish is available in existing DuraSeal colors as well as many Certified Minwax colors. It can be used with or without a finish coat, and is compatible with all DuraSeal  water-borne and oil-modified finish system.
 
Materials Check-list:
  • To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Please click the "Materials" tab  to locate the materials check-list for a list of the recommended  tools.

Color:

  • DuraSeal Quick Coat Penetrating Finish gives hardwood floors a soft, satiny sheen. 

Coverage:

  • DuraSeal Quick Coat Penetrating Finish covers approximately 500 square feet per gallon. While a second coat is optional, this product will cover approximately 800 square feet per gallon. 

Dry Time and Cure:

  • DuraSeal Quick Coat Penetrating Finish dries in approximately 2-3 hours. Note: Dry time is based on conditions of 77 F and 50% relative humidity. 

Clean-up:

  • Clean equipment using paint thinner or mineral spirits.

Storage:

  • Always store at room temperature. If stored at high temperature, cool to room temperature before use. Keep from freezing. 

Application Hints:

  • Read the "HOW TO" tab of this listing for application hints.

Surface Preparation:

  1. Properly prepare surface according to NWFA approved methods. Use a No. 100 grit screen for the final screening cut. 
  2. Remove all dust  with a broom and/or vacuum and tack the surface with a clean cloth moistened with mineral spirits. 

Application:

  1. Stir or shake material thoroughly before and occasionally during use. Apply a test sample on  a small inconspicuous area before proceeding with the entire job. If desired DuraSeal Quick Coat Penetrating Finish in Neutral can be used to lighten any standard DuraSeal wood tone.
  2. Apply the first coat of DuraSeal Quick Coat Penetrating Finish liberally with a brush, lamb wool applicator or cloth at a coverage rate of approximately 500 square feet per gallon.
  3. Allow to penetrate for 5-8 minutes then remove any excess by wiping with rags or by buffing with #2 steel wool. Removal of all excess material is essential to ensure proper dry time and adhesion of the finish coat. 
  4. If desired, apply a thin second coat at a coverage rate of approximately 800 square feet per gallon. Allow to penetrate and remove excess material in the same manner as the first coat [step 3 above].
  5. Allow the final coat to dry at least 2 hours and apply a DuraSeal finish coat of your choice. 

Maintenance:

  • Regularly remove dust  and dirt by sweeping or vacuuming. Periodic buffing will renew luster. Exceptionally worn areas may require an additional finish coat. Maintained floors sealed only with DuraSeal Quick Coat Penetrating Finish with DuraSeal Renovator Cleaner and Reconditioner.
Materials Check-list:

To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Listed below are a few recommended tools.

(MSDS)

(PDS)

(California Prop 65 Labeling Requirements)

Click the link below to see a short video of this product in use and for some ideas for how to get the best results. 

DuraSeal Quick Coat Stain - Country White Quart

Manufacturer: DuraSeal
Product ID: 861010000
Price: $16.49
QTY Add to cart
DuraSeal Quick Coat Penetrating Finish
Country White Quart
 
DuraSeal Quick Coat Penetrating Finish is a semi-transparent stain. This product is formulated to seal, color and provide exceptional durability when used on bare wood or masonry surfaces. This rich blend of oil and resin gives hardwood floors a soft, satiny sheen. Its unique formulation provides a surface that can be topcoated in two hours. DuraSeal Quick Coat Penetrating Finish is available in existing DuraSeal colors as well as many Certified Minwax colors. It can be used with or without a finish coat, and is compatible with all DuraSeal  water-borne and oil-modified finish system.


Materials Check-list:
  • To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Please click the "Materials" tab  to locate the materials check-list for a list of the recommended  tools.

Color:

  • DuraSeal Quick Coat Penetrating Finish gives hardwood floors a soft, satiny sheen. 

Coverage:

  • DuraSeal Quick Coat Penetrating Finish covers approximately 500 square feet per gallon. While a second coat is optional, this product will cover approximately 800 square feet per gallon. 

Dry Time and Cure:

  • DuraSeal Quick Coat Penetrating Finish dries in approximately 2-3 hours. Note: Dry time is based on conditions of 77 F and 50% relative humidity. 

Clean-up:

  • Clean equipment using paint thinner or mineral spirits.

Storage:

  • Always store at room temperature. If stored at high temperature, cool to room temperature before use. Keep from freezing. 

Application Hints:

  • Read the "HOW TO" tab of this listing for application hints.

Surface Preparation:

  1. Properly prepare surface according to NWFA approved methods. Use a No. 100 grit screen for the final screening cut. 
  2. Remove all dust  with a broom and/or vacuum and tack the surface with a clean cloth moistened with mineral spirits. 

Application:

  1. Stir or shake material thoroughly before and occasionally during use. Apply a test sample on  a small inconspicuous area before proceeding with the entire job. If desired DuraSeal Quick Coat Penetrating Finish in Neutral can be used to lighten any standard DuraSeal wood tone.
  2. Apply the first coat of DuraSeal Quick Coat Penetrating Finish liberally with a brush, lamb wool applicator or cloth at a coverage rate of approximately 500 square feet per gallon.
  3. Allow to penetrate for 5-8 minutes then remove any excess by wiping with rags or by buffing with #2 steel wool. Removal of all excess material is essential to ensure proper dry time and adhesion of the finish coat. 
  4. If desired, apply a thin second coat at a coverage rate of approximately 800 square feet per gallon. Allow to penetrate and remove excess material in the same manner as the first coat [step 3 above].
  5. Allow the final coat to dry at least 2 hours and apply a DuraSeal finish coat of your choice. 

Maintenance:

  • Regularly remove dust  and dirt by sweeping or vacuuming. Periodic buffing will renew luster. Exceptionally worn areas may require an additional finish coat. Maintained floors sealed only with DuraSeal Quick Coat Penetrating Finish with DuraSeal Renovator Cleaner and Reconditioner.
Materials Check-list:

To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Listed below are a few recommended tools.

(MSDS)

(PDS)

(California Prop 65 Labeling Requirements)

Click the link below to see a short video of this product in use and for some ideas for how to get the best results. 

DuraSeal Quick Coat Stain - Dark Walnut Quart

Manufacturer: DuraSeal
Product ID: 861710000
Price: $16.49
QTY Add to cart
DuraSeal Quick Coat Penetrating Finish
Dark Walnut Quart
 
DuraSeal Quick Coat Penetrating Finish is a semi-transparent stain. This product is formulated to seal, color and provide exceptional durability when used on bare wood or masonry surfaces. This rich blend of oil and resin gives hardwood floors a soft, satiny sheen. Its unique formulation provides a surface that can be topcoated in two hours. DuraSeal Quick Coat Penetrating Finish is available in existing DuraSeal colors as well as many Certified Minwax colors. It can be used with or without a finish coat, and is compatible with all DuraSeal  water-borne and oil-modified finish system.
Materials Check-list:
  • To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Please click the "Materials" tab  to locate the materials check-list for a list of the recommended  tools.

Color:

  • DuraSeal Quick Coat Penetrating Finish gives hardwood floors a soft, satiny sheen. 

Coverage:

  • DuraSeal Quick Coat Penetrating Finish covers approximately 500 square feet per gallon. While a second coat is optional, this product will cover approximately 800 square feet per gallon. 

Dry Time and Cure:

  • DuraSeal Quick Coat Penetrating Finish dries in approximately 2-3 hours. Note: Dry time is based on conditions of 77 F and 50% relative humidity. 

Clean-up:

  • Clean equipment using paint thinner or mineral spirits.

Storage:

  • Always store at room temperature. If stored at high temperature, cool to room temperature before use. Keep from freezing. 

Application Hints:

  • Read the "HOW TO" tab of this listing for application hints.

Surface Preparation:

  1. Properly prepare surface according to NWFA approved methods. Use a No. 100 grit screen for the final screening cut. 
  2. Remove all dust  with a broom and/or vacuum and tack the surface with a clean cloth moistened with mineral spirits. 

Application:

  1. Stir or shake material thoroughly before and occasionally during use. Apply a test sample on  a small inconspicuous area before proceeding with the entire job. If desired DuraSeal Quick Coat Penetrating Finish in Neutral can be used to lighten any standard DuraSeal wood tone.
  2. Apply the first coat of DuraSeal Quick Coat Penetrating Finish liberally with a brush, lamb wool applicator or cloth at a coverage rate of approximately 500 square feet per gallon.
  3. Allow to penetrate for 5-8 minutes then remove any excess by wiping with rags or by buffing with #2 steel wool. Removal of all excess material is essential to ensure proper dry time and adhesion of the finish coat. 
  4. If desired, apply a thin second coat at a coverage rate of approximately 800 square feet per gallon. Allow to penetrate and remove excess material in the same manner as the first coat [step 3 above].
  5. Allow the final coat to dry at least 2 hours and apply a DuraSeal finish coat of your choice. 

Maintenance:

  • Regularly remove dust  and dirt by sweeping or vacuuming. Periodic buffing will renew luster. Exceptionally worn areas may require an additional finish coat. Maintained floors sealed only with DuraSeal Quick Coat Penetrating Finish with DuraSeal Renovator Cleaner and Reconditioner.
Materials Check-list:

To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Listed below are a few recommended tools.

(MSDS)

(PDS)

(California Prop 65 Labeling Requirements)

Click the link below to see a short video of this product in use and for some ideas for how to get the best results. 

DuraSeal Quick Coat Stain - Early American Quart

Manufacturer: DuraSeal
Product ID: 861300000
Price: $16.49
QTY Add to cart
DuraSeal Quick Coat Penetrating Finish
Early American Quart
 
DuraSeal Quick Coat Penetrating Finish is a semi-transparent stain. This product is formulated to seal, color and provide exceptional durability when used on bare wood or masonry surfaces. This rich blend of oil and resin gives hardwood floors a soft, satiny sheen. Its unique formulation provides a surface that can be topcoated in two hours. DuraSeal Quick Coat Penetrating Finish is available in existing DuraSeal colors as well as many Certified Minwax colors. It can be used with or without a finish coat, and is compatible with all DuraSeal  water-borne and oil-modified finish system.


Materials Check-list:
  • To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Please click the "Materials" tab  to locate the materials check-list for a list of the recommended  tools.

Color:

  • DuraSeal Quick Coat Penetrating Finish gives hardwood floors a soft, satiny sheen. 

Coverage:

  • DuraSeal Quick Coat Penetrating Finish covers approximately 500 square feet per gallon. While a second coat is optional, this product will cover approximately 800 square feet per gallon. 

Dry Time and Cure:

  • DuraSeal Quick Coat Penetrating Finish dries in approximately 2-3 hours. Note: Dry time is based on conditions of 77 F and 50% relative humidity. 

Clean-up:

  • Clean equipment using paint thinner or mineral spirits.

Storage:

  • Always store at room temperature. If stored at high temperature, cool to room temperature before use. Keep from freezing. 

Application Hints:

  • Read the "HOW TO" tab of this listing for application hints.

Surface Preparation:

  1. Properly prepare surface according to NWFA approved methods. Use a No. 100 grit screen for the final screening cut. 
  2. Remove all dust  with a broom and/or vacuum and tack the surface with a clean cloth moistened with mineral spirits. 

Application:

  1. Stir or shake material thoroughly before and occasionally during use. Apply a test sample on  a small inconspicuous area before proceeding with the entire job. If desired DuraSeal Quick Coat Penetrating Finish in Neutral can be used to lighten any standard DuraSeal wood tone.
  2. Apply the first coat of DuraSeal Quick Coat Penetrating Finish liberally with a brush, lamb wool applicator or cloth at a coverage rate of approximately 500 square feet per gallon.
  3. Allow to penetrate for 5-8 minutes then remove any excess by wiping with rags or by buffing with #2 steel wool. Removal of all excess material is essential to ensure proper dry time and adhesion of the finish coat. 
  4. If desired, apply a thin second coat at a coverage rate of approximately 800 square feet per gallon. Allow to penetrate and remove excess material in the same manner as the first coat [step 3 above].
  5. Allow the final coat to dry at least 2 hours and apply a DuraSeal finish coat of your choice. 

Maintenance:

  • Regularly remove dust  and dirt by sweeping or vacuuming. Periodic buffing will renew luster. Exceptionally worn areas may require an additional finish coat. Maintained floors sealed only with DuraSeal Quick Coat Penetrating Finish with DuraSeal Renovator Cleaner and Reconditioner.
Materials Check-list:

To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Listed below are a few recommended tools.

(MSDS)

(PDS)

(California Prop 65 Labeling Requirements)

Click the link below to see a short video of this product in use and for some ideas for how to get the best results. 

DuraSeal Quick Coat Stain - Ebony Quart

Manufacturer: DuraSeal
Product ID: 861310000
Price: $16.49
QTY Add to cart
DuraSeal Quick Coat Penetrating Finish
Ebony Quart
 
DuraSeal Quick Coat Penetrating Finish is a semi-transparent stain. This product is formulated to seal, color and provide exceptional durability when used on bare wood or masonry surfaces. This rich blend of oil and resin gives hardwood floors a soft, satiny sheen. Its unique formulation provides a surface that can be topcoated in two hours. DuraSeal Quick Coat Penetrating Finish is available in existing DuraSeal colors as well as many Certified Minwax colors. It can be used with or without a finish coat, and is compatible with all DuraSeal  water-borne and oil-modified finish system.


Materials Check-list:
  • To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Please click the "Materials" tab  to locate the materials check-list for a list of the recommended  tools.

Color:

  • DuraSeal Quick Coat Penetrating Finish gives hardwood floors a soft, satiny sheen. 

Coverage:

  • DuraSeal Quick Coat Penetrating Finish covers approximately 500 square feet per gallon. While a second coat is optional, this product will cover approximately 800 square feet per gallon. 

Dry Time and Cure:

  • DuraSeal Quick Coat Penetrating Finish dries in approximately 2-3 hours. Note: Dry time is based on conditions of 77 F and 50% relative humidity. 

Clean-up:

  • Clean equipment using paint thinner or mineral spirits.

Storage:

  • Always store at room temperature. If stored at high temperature, cool to room temperature before use. Keep from freezing. 

Application Hints:

  • Read the "HOW TO" tab of this listing for application hints.

Surface Preparation:

  1. Properly prepare surface according to NWFA approved methods. Use a No. 100 grit screen for the final screening cut. 
  2. Remove all dust  with a broom and/or vacuum and tack the surface with a clean cloth moistened with mineral spirits. 

Application:

  1. Stir or shake material thoroughly before and occasionally during use. Apply a test sample on  a small inconspicuous area before proceeding with the entire job. If desired DuraSeal Quick Coat Penetrating Finish in Neutral can be used to lighten any standard DuraSeal wood tone.
  2. Apply the first coat of DuraSeal Quick Coat Penetrating Finish liberally with a brush, lamb wool applicator or cloth at a coverage rate of approximately 500 square feet per gallon.
  3. Allow to penetrate for 5-8 minutes then remove any excess by wiping with rags or by buffing with #2 steel wool. Removal of all excess material is essential to ensure proper dry time and adhesion of the finish coat. 
  4. If desired, apply a thin second coat at a coverage rate of approximately 800 square feet per gallon. Allow to penetrate and remove excess material in the same manner as the first coat [step 3 above].
  5. Allow the final coat to dry at least 2 hours and apply a DuraSeal finish coat of your choice. 

Maintenance:

  • Regularly remove dust  and dirt by sweeping or vacuuming. Periodic buffing will renew luster. Exceptionally worn areas may require an additional finish coat. Maintained floors sealed only with DuraSeal Quick Coat Penetrating Finish with DuraSeal Renovator Cleaner and Reconditioner.
Materials Check-list:

To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Listed below are a few recommended tools.

(MSDS)

(PDS)

(California Prop 65 Labeling Requirements)

Click the link below to see a short video of this product in use and for some ideas for how to get the best results. 

DuraSeal Quick Coat Stain - English Chestnut Quart

Manufacturer: DuraSeal
Product ID: 861330000
Price: $16.49
QTY Add to cart
DuraSeal Quick Coat Penetrating Finish
English Chestnut Quart
 
DuraSeal Quick Coat Penetrating Finish is a semi-transparent stain. This product is formulated to seal, color and provide exceptional durability when used on bare wood or masonry surfaces. This rich blend of oil and resin gives hardwood floors a soft, satiny sheen. Its unique formulation provides a surface that can be topcoated in two hours. DuraSeal Quick Coat Penetrating Finish is available in existing DuraSeal colors as well as many Certified Minwax colors. It can be used with or without a finish coat, and is compatible with all DuraSeal  water-borne and oil-modified finish system.
 
Materials Check-list:
  • To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Please click the "Materials" tab  to locate the materials check-list for a list of the recommended  tools.

Color:

  • DuraSeal Quick Coat Penetrating Finish gives hardwood floors a soft, satiny sheen. 

Coverage:

  • DuraSeal Quick Coat Penetrating Finish covers approximately 500 square feet per gallon. While a second coat is optional, this product will cover approximately 800 square feet per gallon. 

Dry Time and Cure:

  • DuraSeal Quick Coat Penetrating Finish dries in approximately 2-3 hours. Note: Dry time is based on conditions of 77 F and 50% relative humidity. 

Clean-up:

  • Clean equipment using paint thinner or mineral spirits.

Storage:

  • Always store at room temperature. If stored at high temperature, cool to room temperature before use. Keep from freezing. 

Application Hints:

  • Read the "HOW TO" tab of this listing for application hints.

Surface Preparation:

  1. Properly prepare surface according to NWFA approved methods. Use a No. 100 grit screen for the final screening cut. 
  2. Remove all dust  with a broom and/or vacuum and tack the surface with a clean cloth moistened with mineral spirits. 

Application:

  1. Stir or shake material thoroughly before and occasionally during use. Apply a test sample on  a small inconspicuous area before proceeding with the entire job. If desired DuraSeal Quick Coat Penetrating Finish in Neutral can be used to lighten any standard DuraSeal wood tone.
  2. Apply the first coat of DuraSeal Quick Coat Penetrating Finish liberally with a brush, lamb wool applicator or cloth at a coverage rate of approximately 500 square feet per gallon.
  3. Allow to penetrate for 5-8 minutes then remove any excess by wiping with rags or by buffing with #2 steel wool. Removal of all excess material is essential to ensure proper dry time and adhesion of the finish coat. 
  4. If desired, apply a thin second coat at a coverage rate of approximately 800 square feet per gallon. Allow to penetrate and remove excess material in the same manner as the first coat [step 3 above].
  5. Allow the final coat to dry at least 2 hours and apply a DuraSeal finish coat of your choice. 

Maintenance:

  • Regularly remove dust  and dirt by sweeping or vacuuming. Periodic buffing will renew luster. Exceptionally worn areas may require an additional finish coat. Maintained floors sealed only with DuraSeal Quick Coat Penetrating Finish with DuraSeal Renovator Cleaner and Reconditioner.
Materials Check-list:

To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Listed below are a few recommended tools.

(MSDS)

(PDS)

(California Prop 65 Labeling Requirements)

Click the link below to see a short video of this product in use and for some ideas for how to get the best results. 

DuraSeal Quick Coat Stain - Espresso Quart

Manufacturer: Sherwin-Williams
Product ID: 861730000
Price: $16.49
QTY Add to cart
DuraSeal Quick Coat Penetrating Finish
Espresso Quart
 
DuraSeal Quick Coat Penetrating Finish is a semi-transparent stain. This product is formulated to seal, color and provide exceptional durability when used on bare wood or masonry surfaces. This rich blend of oil and resin gives hardwood floors a soft, satiny sheen. Its unique formulation provides a surface that can be topcoated in two hours. DuraSeal Quick Coat Penetrating Finish is available in existing DuraSeal colors as well as many Certified Minwax colors. It can be used with or without a finish coat, and is compatible with all DuraSeal  water-borne and oil-modified finish system.
Materials Check-list:
  • To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Please click the "Materials" tab  to locate the materials check-list for a list of the recommended  tools.

Color:

  • DuraSeal Quick Coat Penetrating Finish gives hardwood floors a soft, satiny sheen. 

Coverage:

  • DuraSeal Quick Coat Penetrating Finish covers approximately 500 square feet per gallon. While a second coat is optional, this product will cover approximately 800 square feet per gallon. 

Dry Time and Cure:

  • DuraSeal Quick Coat Penetrating Finish dries in approximately 2-3 hours. Note: Dry time is based on conditions of 77 F and 50% relative humidity. 

Clean-up:

  • Clean equipment using paint thinner or mineral spirits.

Storage:

  • Always store at room temperature. If stored at high temperature, cool to room temperature before use. Keep from freezing. 

Application Hints:

  • Read the "HOW TO" tab of this listing for application hints.

Surface Preparation:

  1. Properly prepare surface according to NWFA approved methods. Use a No. 100 grit screen for the final screening cut. 
  2. Remove all dust  with a broom and/or vacuum and tack the surface with a clean cloth moistened with mineral spirits. 

Application:

  1. Stir or shake material thoroughly before and occasionally during use. Apply a test sample on  a small inconspicuous area before proceeding with the entire job. If desired DuraSeal Quick Coat Penetrating Finish in Neutral can be used to lighten any standard DuraSeal wood tone.
  2. Apply the first coat of DuraSeal Quick Coat Penetrating Finish liberally with a brush, lamb wool applicator or cloth at a coverage rate of approximately 500 square feet per gallon.
  3. Allow to penetrate for 5-8 minutes then remove any excess by wiping with rags or by buffing with #2 steel wool. Removal of all excess material is essential to ensure proper dry time and adhesion of the finish coat. 
  4. If desired, apply a thin second coat at a coverage rate of approximately 800 square feet per gallon. Allow to penetrate and remove excess material in the same manner as the first coat [step 3 above].
  5. Allow the final coat to dry at least 2 hours and apply a DuraSeal finish coat of your choice. 

Maintenance:

  • Regularly remove dust  and dirt by sweeping or vacuuming. Periodic buffing will renew luster. Exceptionally worn areas may require an additional finish coat. Maintained floors sealed only with DuraSeal Quick Coat Penetrating Finish with DuraSeal Renovator Cleaner and Reconditioner.
Materials Check-list:

To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Listed below are a few recommended tools.

(MSDS)

(PDS)

(California Prop 65 Labeling Requirements)

Click the link below to see a short video of this product in use and for some ideas for how to get the best results. 

DuraSeal Quick Coat Stain - Fruitwood Quart

Manufacturer: DuraSeal
Product ID: 861410000
Price: $16.49
QTY Add to cart
DuraSeal Quick Coat Penetrating Finish
Fruitwood Quart
 
DuraSeal Quick Coat Penetrating Finish is a semi-transparent stain. This product is formulated to seal, color and provide exceptional durability when used on bare wood or masonry surfaces. This rich blend of oil and resin gives hardwood floors a soft, satiny sheen. Its unique formulation provides a surface that can be topcoated in two hours. DuraSeal Quick Coat Penetrating Finish is available in existing DuraSeal colors as well as many Certified Minwax colors. It can be used with or without a finish coat, and is compatible with all DuraSeal  water-borne and oil-modified finish system.


Materials Check-list:
  • To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Please click the "Materials" tab  to locate the materials check-list for a list of the recommended  tools.

Color:

  • DuraSeal Quick Coat Penetrating Finish gives hardwood floors a soft, satiny sheen. 

Coverage:

  • DuraSeal Quick Coat Penetrating Finish covers approximately 500 square feet per gallon. While a second coat is optional, this product will cover approximately 800 square feet per gallon. 

Dry Time and Cure:

  • DuraSeal Quick Coat Penetrating Finish dries in approximately 2-3 hours. Note: Dry time is based on conditions of 77 F and 50% relative humidity. 

Clean-up:

  • Clean equipment using paint thinner or mineral spirits.

Storage:

  • Always store at room temperature. If stored at high temperature, cool to room temperature before use. Keep from freezing. 

Application Hints:

  • Read the "HOW TO" tab of this listing for application hints.

Surface Preparation:

  1. Properly prepare surface according to NWFA approved methods. Use a No. 100 grit screen for the final screening cut. 
  2. Remove all dust  with a broom and/or vacuum and tack the surface with a clean cloth moistened with mineral spirits. 

Application:

  1. Stir or shake material thoroughly before and occasionally during use. Apply a test sample on  a small inconspicuous area before proceeding with the entire job. If desired DuraSeal Quick Coat Penetrating Finish in Neutral can be used to lighten any standard DuraSeal wood tone.
  2. Apply the first coat of DuraSeal Quick Coat Penetrating Finish liberally with a brush, lamb wool applicator or cloth at a coverage rate of approximately 500 square feet per gallon.
  3. Allow to penetrate for 5-8 minutes then remove any excess by wiping with rags or by buffing with #2 steel wool. Removal of all excess material is essential to ensure proper dry time and adhesion of the finish coat. 
  4. If desired, apply a thin second coat at a coverage rate of approximately 800 square feet per gallon. Allow to penetrate and remove excess material in the same manner as the first coat [step 3 above].
  5. Allow the final coat to dry at least 2 hours and apply a DuraSeal finish coat of your choice. 

Maintenance:

  • Regularly remove dust  and dirt by sweeping or vacuuming. Periodic buffing will renew luster. Exceptionally worn areas may require an additional finish coat. Maintained floors sealed only with DuraSeal Quick Coat Penetrating Finish with DuraSeal Renovator Cleaner and Reconditioner.
Materials Check-list:

To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Listed below are a few recommended tools.

(MSDS)

(PDS)

(California Prop 65 Labeling Requirements)

Click the link below to see a short video of this product in use and for some ideas for how to get the best results. 

DuraSeal Quick Coat Stain - Golden Brown Quart

Manufacturer: DuraSeal
Product ID: 861210000
Price: $16.49
QTY Add to cart
DuraSeal Quick Coat Penetrating Finish
Golden Brown Quart
 
DuraSeal Quick Coat Penetrating Finish is a semi-transparent stain. This product is formulated to seal, color and provide exceptional durability when used on bare wood or masonry surfaces. This rich blend of oil and resin gives hardwood floors a soft, satiny sheen. Its unique formulation provides a surface that can be topcoated in two hours. DuraSeal Quick Coat Penetrating Finish is available in existing DuraSeal colors as well as many Certified Minwax colors. It can be used with or without a finish coat, and is compatible with all DuraSeal  water-borne and oil-modified finish system.


Materials Check-list:
  • To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Please click the "Materials" tab  to locate the materials check-list for a list of the recommended  tools.

Color:

  • DuraSeal Quick Coat Penetrating Finish gives hardwood floors a soft, satiny sheen. 

Coverage:

  • DuraSeal Quick Coat Penetrating Finish covers approximately 500 square feet per gallon. While a second coat is optional, this product will cover approximately 800 square feet per gallon. 

Dry Time and Cure:

  • DuraSeal Quick Coat Penetrating Finish dries in approximately 2-3 hours. Note: Dry time is based on conditions of 77 F and 50% relative humidity. 

Clean-up:

  • Clean equipment using paint thinner or mineral spirits.

Storage:

  • Always store at room temperature. If stored at high temperature, cool to room temperature before use. Keep from freezing. 

Application Hints:

  • Read the "HOW TO" tab of this listing for application hints.

Surface Preparation:

  1. Properly prepare surface according to NWFA approved methods. Use a No. 100 grit screen for the final screening cut. 
  2. Remove all dust  with a broom and/or vacuum and tack the surface with a clean cloth moistened with mineral spirits. 

Application:

  1. Stir or shake material thoroughly before and occasionally during use. Apply a test sample on  a small inconspicuous area before proceeding with the entire job. If desired DuraSeal Quick Coat Penetrating Finish in Neutral can be used to lighten any standard DuraSeal wood tone.
  2. Apply the first coat of DuraSeal Quick Coat Penetrating Finish liberally with a brush, lamb wool applicator or cloth at a coverage rate of approximately 500 square feet per gallon.
  3. Allow to penetrate for 5-8 minutes then remove any excess by wiping with rags or by buffing with #2 steel wool. Removal of all excess material is essential to ensure proper dry time and adhesion of the finish coat. 
  4. If desired, apply a thin second coat at a coverage rate of approximately 800 square feet per gallon. Allow to penetrate and remove excess material in the same manner as the first coat [step 3 above].
  5. Allow the final coat to dry at least 2 hours and apply a DuraSeal finish coat of your choice. 

Maintenance:

  • Regularly remove dust  and dirt by sweeping or vacuuming. Periodic buffing will renew luster. Exceptionally worn areas may require an additional finish coat. Maintained floors sealed only with DuraSeal Quick Coat Penetrating Finish with DuraSeal Renovator Cleaner and Reconditioner.
Materials Check-list:

To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Listed below are a few recommended tools.

(MSDS)

(PDS)

(California Prop 65 Labeling Requirements)

Click the link below to see a short video of this product in use and for some ideas for how to get the best results. 

DuraSeal Quick Coat Stain - Golden Oak Quart

Manufacturer: DuraSeal
Product ID: 861120000
Price: $16.49
QTY Add to cart
DuraSeal Quick Coat Penetrating Finish
Golden Oak Quart
 
DuraSeal Quick Coat Penetrating Finish is a semi-transparent stain. This product is formulated to seal, color and provide exceptional durability when used on bare wood or masonry surfaces. This rich blend of oil and resin gives hardwood floors a soft, satiny sheen. Its unique formulation provides a surface that can be topcoated in two hours. DuraSeal Quick Coat Penetrating Finish is available in existing DuraSeal colors as well as many Certified Minwax colors. It can be used with or without a finish coat, and is compatible with all DuraSeal  water-borne and oil-modified finish system.
 
Materials Check-list:
  • To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Please click the "Materials" tab  to locate the materials check-list for a list of the recommended  tools.

Color:

  • DuraSeal Quick Coat Penetrating Finish gives hardwood floors a soft, satiny sheen. 

Coverage:

  • DuraSeal Quick Coat Penetrating Finish covers approximately 500 square feet per gallon. While a second coat is optional, this product will cover approximately 800 square feet per gallon. 

Dry Time and Cure:

  • DuraSeal Quick Coat Penetrating Finish dries in approximately 2-3 hours. Note: Dry time is based on conditions of 77 F and 50% relative humidity. 

Clean-up:

  • Clean equipment using paint thinner or mineral spirits.

Storage:

  • Always store at room temperature. If stored at high temperature, cool to room temperature before use. Keep from freezing. 

Application Hints:

  • Read the "HOW TO" tab of this listing for application hints.

Surface Preparation:

  1. Properly prepare surface according to NWFA approved methods. Use a No. 100 grit screen for the final screening cut. 
  2. Remove all dust  with a broom and/or vacuum and tack the surface with a clean cloth moistened with mineral spirits. 

Application:

  1. Stir or shake material thoroughly before and occasionally during use. Apply a test sample on  a small inconspicuous area before proceeding with the entire job. If desired DuraSeal Quick Coat Penetrating Finish in Neutral can be used to lighten any standard DuraSeal wood tone.
  2. Apply the first coat of DuraSeal Quick Coat Penetrating Finish liberally with a brush, lamb wool applicator or cloth at a coverage rate of approximately 500 square feet per gallon.
  3. Allow to penetrate for 5-8 minutes then remove any excess by wiping with rags or by buffing with #2 steel wool. Removal of all excess material is essential to ensure proper dry time and adhesion of the finish coat. 
  4. If desired, apply a thin second coat at a coverage rate of approximately 800 square feet per gallon. Allow to penetrate and remove excess material in the same manner as the first coat [step 3 above].
  5. Allow the final coat to dry at least 2 hours and apply a DuraSeal finish coat of your choice. 

Maintenance:

  • Regularly remove dust  and dirt by sweeping or vacuuming. Periodic buffing will renew luster. Exceptionally worn areas may require an additional finish coat. Maintained floors sealed only with DuraSeal Quick Coat Penetrating Finish with DuraSeal Renovator Cleaner and Reconditioner.
Materials Check-list:

To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Listed below are a few recommended tools.

(MSDS)

(PDS)

(California Prop 65 Labeling Requirements)

Click the link below to see a short video of this product in use and for some ideas for how to get the best results. 

DuraSeal Quick Coat Stain - Golden Pecan Quart

Manufacturer: Sherwin-Williams
Product ID: 861450000
Price: $16.49
QTY Add to cart
DuraSeal Quick Coat Penetrating Finish
Golden Pecan Quart
 
DuraSeal Quick Coat Penetrating Finish is a semi-transparent stain. This product is formulated to seal, color and provide exceptional durability when used on bare wood or masonry surfaces. This rich blend of oil and resin gives hardwood floors a soft, satiny sheen. Its unique formulation provides a surface that can be topcoated in two hours. DuraSeal Quick Coat Penetrating Finish is available in existing DuraSeal colors as well as many Certified Minwax colors. It can be used with or without a finish coat, and is compatible with all DuraSeal  water-borne and oil-modified finish system.
Materials Check-list:
  • To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Please click the "Materials" tab  to locate the materials check-list for a list of the recommended  tools.

Color:

  • DuraSeal Quick Coat Penetrating Finish gives hardwood floors a soft, satiny sheen. 

Coverage:

  • DuraSeal Quick Coat Penetrating Finish covers approximately 500 square feet per gallon. While a second coat is optional, this product will cover approximately 800 square feet per gallon. 

Dry Time and Cure:

  • DuraSeal Quick Coat Penetrating Finish dries in approximately 2-3 hours. Note: Dry time is based on conditions of 77 F and 50% relative humidity. 

Clean-up:

  • Clean equipment using paint thinner or mineral spirits.

Storage:

  • Always store at room temperature. If stored at high temperature, cool to room temperature before use. Keep from freezing. 

Application Hints:

  • Read the "HOW TO" tab of this listing for application hints.

Surface Preparation:

  1. Properly prepare surface according to NWFA approved methods. Use a No. 100 grit screen for the final screening cut. 
  2. Remove all dust  with a broom and/or vacuum and tack the surface with a clean cloth moistened with mineral spirits. 

Application:

  1. Stir or shake material thoroughly before and occasionally during use. Apply a test sample on  a small inconspicuous area before proceeding with the entire job. If desired DuraSeal Quick Coat Penetrating Finish in Neutral can be used to lighten any standard DuraSeal wood tone.
  2. Apply the first coat of DuraSeal Quick Coat Penetrating Finish liberally with a brush, lamb wool applicator or cloth at a coverage rate of approximately 500 square feet per gallon.
  3. Allow to penetrate for 5-8 minutes then remove any excess by wiping with rags or by buffing with #2 steel wool. Removal of all excess material is essential to ensure proper dry time and adhesion of the finish coat. 
  4. If desired, apply a thin second coat at a coverage rate of approximately 800 square feet per gallon. Allow to penetrate and remove excess material in the same manner as the first coat [step 3 above].
  5. Allow the final coat to dry at least 2 hours and apply a DuraSeal finish coat of your choice. 

Maintenance:

  • Regularly remove dust  and dirt by sweeping or vacuuming. Periodic buffing will renew luster. Exceptionally worn areas may require an additional finish coat. Maintained floors sealed only with DuraSeal Quick Coat Penetrating Finish with DuraSeal Renovator Cleaner and Reconditioner.
Materials Check-list:

To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Listed below are a few recommended tools.

(MSDS)

(PDS)

(California Prop 65 Labeling Requirements)

Click the link below to see a short video of this product in use and for some ideas for how to get the best results. 

DuraSeal Quick Coat Stain - Gunstock Quart

Manufacturer: DuraSeal
Product ID: 861500000
Price: $16.49
QTY Add to cart
DuraSeal Quick Coat Penetrating Finish
Gunstock Quart
 
DuraSeal Quick Coat Penetrating Finish is a semi-transparent stain. This product is formulated to seal, color and provide exceptional durability when used on bare wood or masonry surfaces. This rich blend of oil and resin gives hardwood floors a soft, satiny sheen. Its unique formulation provides a surface that can be topcoated in two hours. DuraSeal Quick Coat Penetrating Finish is available in existing DuraSeal colors as well as many Certified Minwax colors. It can be used with or without a finish coat, and is compatible with all DuraSeal  water-borne and oil-modified finish system.


Materials Check-list:
  • To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Please click the "Materials" tab  to locate the materials check-list for a list of the recommended  tools.

Color:

  • DuraSeal Quick Coat Penetrating Finish gives hardwood floors a soft, satiny sheen. 

Coverage:

  • DuraSeal Quick Coat Penetrating Finish covers approximately 500 square feet per gallon. While a second coat is optional, this product will cover approximately 800 square feet per gallon. 

Dry Time and Cure:

  • DuraSeal Quick Coat Penetrating Finish dries in approximately 2-3 hours. Note: Dry time is based on conditions of 77 F and 50% relative humidity. 

Clean-up:

  • Clean equipment using paint thinner or mineral spirits.

Storage:

  • Always store at room temperature. If stored at high temperature, cool to room temperature before use. Keep from freezing. 

Application Hints:

  • Read the "HOW TO" tab of this listing for application hints.

Surface Preparation:

  1. Properly prepare surface according to NWFA approved methods. Use a No. 100 grit screen for the final screening cut. 
  2. Remove all dust  with a broom and/or vacuum and tack the surface with a clean cloth moistened with mineral spirits. 

Application:

  1. Stir or shake material thoroughly before and occasionally during use. Apply a test sample on  a small inconspicuous area before proceeding with the entire job. If desired DuraSeal Quick Coat Penetrating Finish in Neutral can be used to lighten any standard DuraSeal wood tone.
  2. Apply the first coat of DuraSeal Quick Coat Penetrating Finish liberally with a brush, lamb wool applicator or cloth at a coverage rate of approximately 500 square feet per gallon.
  3. Allow to penetrate for 5-8 minutes then remove any excess by wiping with rags or by buffing with #2 steel wool. Removal of all excess material is essential to ensure proper dry time and adhesion of the finish coat. 
  4. If desired, apply a thin second coat at a coverage rate of approximately 800 square feet per gallon. Allow to penetrate and remove excess material in the same manner as the first coat [step 3 above].
  5. Allow the final coat to dry at least 2 hours and apply a DuraSeal finish coat of your choice. 

Maintenance:

  • Regularly remove dust  and dirt by sweeping or vacuuming. Periodic buffing will renew luster. Exceptionally worn areas may require an additional finish coat. Maintained floors sealed only with DuraSeal Quick Coat Penetrating Finish with DuraSeal Renovator Cleaner and Reconditioner.
Materials Check-list:

To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Listed below are a few recommended tools.

(MSDS)

(PDS)

(California Prop 65 Labeling Requirements)

Click the link below to see a short video of this product in use and for some ideas for how to get the best results. 

DuraSeal Quick Coat Stain - Jacobean Quart

Manufacturer: DuraSeal
Product ID: 861750000
Price: $16.49
QTY Add to cart
DuraSeal Quick Coat Penetrating Finish
Jacobean Quart
 
DuraSeal Quick Coat Penetrating Finish is a semi-transparent stain. This product is formulated to seal, color and provide exceptional durability when used on bare wood or masonry surfaces. This rich blend of oil and resin gives hardwood floors a soft, satiny sheen. Its unique formulation provides a surface that can be topcoated in two hours. DuraSeal Quick Coat Penetrating Finish is available in existing DuraSeal colors as well as many Certified Minwax colors. It can be used with or without a finish coat, and is compatible with all DuraSeal  water-borne and oil-modified finish system.


Materials Check-list:
  • To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Please click the "Materials" tab  to locate the materials check-list for a list of the recommended  tools.

Color:

  • DuraSeal Quick Coat Penetrating Finish gives hardwood floors a soft, satiny sheen. 

Coverage:

  • DuraSeal Quick Coat Penetrating Finish covers approximately 500 square feet per gallon. While a second coat is optional, this product will cover approximately 800 square feet per gallon. 

Dry Time and Cure:

  • DuraSeal Quick Coat Penetrating Finish dries in approximately 2-3 hours. Note: Dry time is based on conditions of 77 F and 50% relative humidity. 

Clean-up:

  • Clean equipment using paint thinner or mineral spirits.

Storage:

  • Always store at room temperature. If stored at high temperature, cool to room temperature before use. Keep from freezing. 

Application Hints:

  • Read the "HOW TO" tab of this listing for application hints.

Surface Preparation:

  1. Properly prepare surface according to NWFA approved methods. Use a No. 100 grit screen for the final screening cut. 
  2. Remove all dust  with a broom and/or vacuum and tack the surface with a clean cloth moistened with mineral spirits. 

Application:

  1. Stir or shake material thoroughly before and occasionally during use. Apply a test sample on  a small inconspicuous area before proceeding with the entire job. If desired DuraSeal Quick Coat Penetrating Finish in Neutral can be used to lighten any standard DuraSeal wood tone.
  2. Apply the first coat of DuraSeal Quick Coat Penetrating Finish liberally with a brush, lamb wool applicator or cloth at a coverage rate of approximately 500 square feet per gallon.
  3. Allow to penetrate for 5-8 minutes then remove any excess by wiping with rags or by buffing with #2 steel wool. Removal of all excess material is essential to ensure proper dry time and adhesion of the finish coat. 
  4. If desired, apply a thin second coat at a coverage rate of approximately 800 square feet per gallon. Allow to penetrate and remove excess material in the same manner as the first coat [step 3 above].
  5. Allow the final coat to dry at least 2 hours and apply a DuraSeal finish coat of your choice. 

Maintenance:

  • Regularly remove dust  and dirt by sweeping or vacuuming. Periodic buffing will renew luster. Exceptionally worn areas may require an additional finish coat. Maintained floors sealed only with DuraSeal Quick Coat Penetrating Finish with DuraSeal Renovator Cleaner and Reconditioner.
Materials Check-list:

To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Listed below are a few recommended tools.

(MSDS)

(PDS)

(California Prop 65 Labeling Requirements)

Click the link below to see a short video of this product in use and for some ideas for how to get the best results. 

DuraSeal Quick Coat Stain - Medium Brown Quart

Manufacturer: DuraSeal
Product ID: 861280000
Price: $16.49
QTY Add to cart
DuraSeal Quick Coat Penetrating Finish
Medium Brown Quart
 
DuraSeal Quick Coat Penetrating Finish is a semi-transparent stain. This product is formulated to seal, color and provide exceptional durability when used on bare wood or masonry surfaces. This rich blend of oil and resin gives hardwood floors a soft, satiny sheen. Its unique formulation provides a surface that can be topcoated in two hours. DuraSeal Quick Coat Penetrating Finish is available in existing DuraSeal colors as well as many Certified Minwax colors. It can be used with or without a finish coat, and is compatible with all DuraSeal  water-borne and oil-modified finish system.

*NOTE: 
FedEx charges a $20.00 Hazardous Shipping fee for quantities up to 50 lbs. (50 lbs.= 5 Gallons = 20 Quarts)
Materials Check-list:
  • To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Please click the "Materials" tab  to locate the materials check-list for a list of the recommended  tools.

Color:

  • DuraSeal Quick Coat Penetrating Finish gives hardwood floors a soft, satiny sheen. 

Coverage:

  • DuraSeal Quick Coat Penetrating Finish covers approximately 500 square feet per gallon. While a second coat is optional, this product will cover approximately 800 square feet per gallon. 

Dry Time and Cure:

  • DuraSeal Quick Coat Penetrating Finish dries in approximately 2-3 hours. Note: Dry time is based on conditions of 77 F and 50% relative humidity. 

Clean-up:

  • Clean equipment using paint thinner or mineral spirits.

Storage:

  • Always store at room temperature. If stored at high temperature, cool to room temperature before use. Keep from freezing. 

Application Hints:

  • Read the "HOW TO" tab of this listing for application hints.

Surface Preparation:

  1. Properly prepare surface according to NWFA approved methods. Use a No. 100 grit screen for the final screening cut. 
  2. Remove all dust  with a broom and/or vacuum and tack the surface with a clean cloth moistened with mineral spirits. 

Application:

  1. Stir or shake material thoroughly before and occasionally during use. Apply a test sample on  a small inconspicuous area before proceeding with the entire job. If desired DuraSeal Quick Coat Penetrating Finish in Neutral can be used to lighten any standard DuraSeal wood tone.
  2. Apply the first coat of DuraSeal Quick Coat Penetrating Finish liberally with a brush, lamb wool applicator or cloth at a coverage rate of approximately 500 square feet per gallon.
  3. Allow to penetrate for 5-8 minutes then remove any excess by wiping with rags or by buffing with #2 steel wool. Removal of all excess material is essential to ensure proper dry time and adhesion of the finish coat. 
  4. If desired, apply a thin second coat at a coverage rate of approximately 800 square feet per gallon. Allow to penetrate and remove excess material in the same manner as the first coat [step 3 above].
  5. Allow the final coat to dry at least 2 hours and apply a DuraSeal finish coat of your choice. 

Maintenance:

  • Regularly remove dust  and dirt by sweeping or vacuuming. Periodic buffing will renew luster. Exceptionally worn areas may require an additional finish coat. Maintained floors sealed only with DuraSeal Quick Coat Penetrating Finish with DuraSeal Renovator Cleaner and Reconditioner.
Materials Check-list:

To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Listed below are a few recommended tools.

(MSDS)

(PDS)

(California Prop 65 Labeling Requirements)

Click the link below to see a short video of this product in use and for some ideas for how to get the best results. 

DuraSeal Quick Coat Stain - Mesquite Red Quart

Manufacturer: DuraSeal
Product ID: 861220000
Price: $16.49
QTY Add to cart
DuraSeal Quick Coat Penetrating Finish
Mesquite Quart
 
DuraSeal Quick Coat Penetrating Finish is a semi-transparent stain. This product is formulated to seal, color and provide exceptional durability when used on bare wood or masonry surfaces. This rich blend of oil and resin gives hardwood floors a soft, satiny sheen. Its unique formulation provides a surface that can be topcoated in two hours. DuraSeal Quick Coat Penetrating Finish is available in existing DuraSeal colors as well as many Certified Minwax colors. It can be used with or without a finish coat, and is compatible with all DuraSeal  water-borne and oil-modified finish system.

*NOTE: 
FedEx charges a $20.00 Hazardous Shipping fee for quantities up to 50 lbs. (50 lbs.= 5 Gallons = 20 Quarts)
Materials Check-list:
  • To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Please click the "Materials" tab  to locate the materials check-list for a list of the recommended  tools.

Color:

  • DuraSeal Quick Coat Penetrating Finish gives hardwood floors a soft, satiny sheen. 

Coverage:

  • DuraSeal Quick Coat Penetrating Finish covers approximately 500 square feet per gallon. While a second coat is optional, this product will cover approximately 800 square feet per gallon. 

Dry Time and Cure:

  • DuraSeal Quick Coat Penetrating Finish dries in approximately 2-3 hours. Note: Dry time is based on conditions of 77 F and 50% relative humidity. 

Clean-up:

  • Clean equipment using paint thinner or mineral spirits.

Storage:

  • Always store at room temperature. If stored at high temperature, cool to room temperature before use. Keep from freezing. 

Application Hints:

  • Read the "HOW TO" tab of this listing for application hints.

Surface Preparation:

  1. Properly prepare surface according to NWFA approved methods. Use a No. 100 grit screen for the final screening cut. 
  2. Remove all dust  with a broom and/or vacuum and tack the surface with a clean cloth moistened with mineral spirits. 

Application:

  1. Stir or shake material thoroughly before and occasionally during use. Apply a test sample on  a small inconspicuous area before proceeding with the entire job. If desired DuraSeal Quick Coat Penetrating Finish in Neutral can be used to lighten any standard DuraSeal wood tone.
  2. Apply the first coat of DuraSeal Quick Coat Penetrating Finish liberally with a brush, lamb wool applicator or cloth at a coverage rate of approximately 500 square feet per gallon.
  3. Allow to penetrate for 5-8 minutes then remove any excess by wiping with rags or by buffing with #2 steel wool. Removal of all excess material is essential to ensure proper dry time and adhesion of the finish coat. 
  4. If desired, apply a thin second coat at a coverage rate of approximately 800 square feet per gallon. Allow to penetrate and remove excess material in the same manner as the first coat [step 3 above].
  5. Allow the final coat to dry at least 2 hours and apply a DuraSeal finish coat of your choice. 

Maintenance:

  • Regularly remove dust  and dirt by sweeping or vacuuming. Periodic buffing will renew luster. Exceptionally worn areas may require an additional finish coat. Maintained floors sealed only with DuraSeal Quick Coat Penetrating Finish with DuraSeal Renovator Cleaner and Reconditioner.
Materials Check-list:

To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Listed below are a few recommended tools.

(MSDS)

(PDS)

(California Prop 65 Labeling Requirements)

Click the link below to see a short video of this product in use and for some ideas for how to get the best results. 

DuraSeal Quick Coat Stain - Neutral Quart

Manufacturer: DuraSeal
Product ID: 861100000
Price: $16.49
QTY Add to cart
DuraSeal Quick Coat Penetrating Finish
Neutral Quart
 
DuraSeal Quick Coat Penetrating Finish is a semi-transparent stain. This product is formulated to seal, color and provide exceptional durability when used on bare wood or masonry surfaces. This rich blend of oil and resin gives hardwood floors a soft, satiny sheen. Its unique formulation provides a surface that can be topcoated in two hours. DuraSeal Quick Coat Penetrating Finish is available in existing DuraSeal colors as well as many Certified Minwax colors. It can be used with or without a finish coat, and is compatible with all DuraSeal  water-borne and oil-modified finish system.


Materials Check-list:
  • To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Please click the "Materials" tab  to locate the materials check-list for a list of the recommended  tools.

Color:

  • DuraSeal Quick Coat Penetrating Finish gives hardwood floors a soft, satiny sheen. 

Coverage:

  • DuraSeal Quick Coat Penetrating Finish covers approximately 500 square feet per gallon. While a second coat is optional, this product will cover approximately 800 square feet per gallon. 

Dry Time and Cure:

  • DuraSeal Quick Coat Penetrating Finish dries in approximately 2-3 hours. Note: Dry time is based on conditions of 77 F and 50% relative humidity. 

Clean-up:

  • Clean equipment using paint thinner or mineral spirits.

Storage:

  • Always store at room temperature. If stored at high temperature, cool to room temperature before use. Keep from freezing. 

Application Hints:

  • Read the "HOW TO" tab of this listing for application hints.

Surface Preparation:

  1. Properly prepare surface according to NWFA approved methods. Use a No. 100 grit screen for the final screening cut. 
  2. Remove all dust  with a broom and/or vacuum and tack the surface with a clean cloth moistened with mineral spirits. 

Application:

  1. Stir or shake material thoroughly before and occasionally during use. Apply a test sample on  a small inconspicuous area before proceeding with the entire job. If desired DuraSeal Quick Coat Penetrating Finish in Neutral can be used to lighten any standard DuraSeal wood tone.
  2. Apply the first coat of DuraSeal Quick Coat Penetrating Finish liberally with a brush, lamb wool applicator or cloth at a coverage rate of approximately 500 square feet per gallon.
  3. Allow to penetrate for 5-8 minutes then remove any excess by wiping with rags or by buffing with #2 steel wool. Removal of all excess material is essential to ensure proper dry time and adhesion of the finish coat. 
  4. If desired, apply a thin second coat at a coverage rate of approximately 800 square feet per gallon. Allow to penetrate and remove excess material in the same manner as the first coat [step 3 above].
  5. Allow the final coat to dry at least 2 hours and apply a DuraSeal finish coat of your choice. 

Maintenance:

  • Regularly remove dust  and dirt by sweeping or vacuuming. Periodic buffing will renew luster. Exceptionally worn areas may require an additional finish coat. Maintained floors sealed only with DuraSeal Quick Coat Penetrating Finish with DuraSeal Renovator Cleaner and Reconditioner.
Materials Check-list:

To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Listed below are a few recommended tools.

(MSDS)

(PDS)

(California Prop 65 Labeling Requirements)

Click the link below to see a short video of this product in use and for some ideas for how to get the best results. 

DuraSeal Quick Coat Stain - Provincial Quart

Manufacturer: DuraSeal
Product ID: 861110000
Price: $16.49
QTY Add to cart
DuraSeal Quick Coat Penetrating Finish
Provincial Quart
 
DuraSeal Quick Coat Penetrating Finish is a semi-transparent stain. This product is formulated to seal, color and provide exceptional durability when used on bare wood or masonry surfaces. This rich blend of oil and resin gives hardwood floors a soft, satiny sheen. Its unique formulation provides a surface that can be topcoated in two hours. DuraSeal Quick Coat Penetrating Finish is available in existing DuraSeal colors as well as many Certified Minwax colors. It can be used with or without a finish coat, and is compatible with all DuraSeal  water-borne and oil-modified finish system.


Materials Check-list:
  • To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Please click the "Materials" tab  to locate the materials check-list for a list of the recommended  tools.

Color:

  • DuraSeal Quick Coat Penetrating Finish gives hardwood floors a soft, satiny sheen. 

Coverage:

  • DuraSeal Quick Coat Penetrating Finish covers approximately 500 square feet per gallon. While a second coat is optional, this product will cover approximately 800 square feet per gallon. 

Dry Time and Cure:

  • DuraSeal Quick Coat Penetrating Finish dries in approximately 2-3 hours. Note: Dry time is based on conditions of 77 F and 50% relative humidity. 

Clean-up:

  • Clean equipment using paint thinner or mineral spirits.

Storage:

  • Always store at room temperature. If stored at high temperature, cool to room temperature before use. Keep from freezing. 

Application Hints:

  • Read the "HOW TO" tab of this listing for application hints.

Surface Preparation:

  1. Properly prepare surface according to NWFA approved methods. Use a No. 100 grit screen for the final screening cut. 
  2. Remove all dust  with a broom and/or vacuum and tack the surface with a clean cloth moistened with mineral spirits. 

Application:

  1. Stir or shake material thoroughly before and occasionally during use. Apply a test sample on  a small inconspicuous area before proceeding with the entire job. If desired DuraSeal Quick Coat Penetrating Finish in Neutral can be used to lighten any standard DuraSeal wood tone.
  2. Apply the first coat of DuraSeal Quick Coat Penetrating Finish liberally with a brush, lamb wool applicator or cloth at a coverage rate of approximately 500 square feet per gallon.
  3. Allow to penetrate for 5-8 minutes then remove any excess by wiping with rags or by buffing with #2 steel wool. Removal of all excess material is essential to ensure proper dry time and adhesion of the finish coat. 
  4. If desired, apply a thin second coat at a coverage rate of approximately 800 square feet per gallon. Allow to penetrate and remove excess material in the same manner as the first coat [step 3 above].
  5. Allow the final coat to dry at least 2 hours and apply a DuraSeal finish coat of your choice. 

Maintenance:

  • Regularly remove dust  and dirt by sweeping or vacuuming. Periodic buffing will renew luster. Exceptionally worn areas may require an additional finish coat. Maintained floors sealed only with DuraSeal Quick Coat Penetrating Finish with DuraSeal Renovator Cleaner and Reconditioner.
Materials Check-list:

To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Listed below are a few recommended tools.

(MSDS)

(PDS)

(California Prop 65 Labeling Requirements)

Click the link below to see a short video of this product in use and for some ideas for how to get the best results. 

DuraSeal Quick Coat Stain - Red Mahogany Quart

Manufacturer: DuraSeal
Product ID: 861250000
Price: $16.49
QTY Add to cart
DuraSeal Quick Coat Penetrating Finish
Red Mahogany Quart
 
DuraSeal Quick Coat Penetrating Finish is a semi-transparent stain. This product is formulated to seal, color and provide exceptional durability when used on bare wood or masonry surfaces. This rich blend of oil and resin gives hardwood floors a soft, satiny sheen. Its unique formulation provides a surface that can be topcoated in two hours. DuraSeal Quick Coat Penetrating Finish is available in existing DuraSeal colors as well as many Certified Minwax colors. It can be used with or without a finish coat, and is compatible with all DuraSeal  water-borne and oil-modified finish system.


Materials Check-list:
  • To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Please click the "Materials" tab  to locate the materials check-list for a list of the recommended  tools.

Color:

  • DuraSeal Quick Coat Penetrating Finish gives hardwood floors a soft, satiny sheen. 

Coverage:

  • DuraSeal Quick Coat Penetrating Finish covers approximately 500 square feet per gallon. While a second coat is optional, this product will cover approximately 800 square feet per gallon. 

Dry Time and Cure:

  • DuraSeal Quick Coat Penetrating Finish dries in approximately 2-3 hours. Note: Dry time is based on conditions of 77 F and 50% relative humidity. 

Clean-up:

  • Clean equipment using paint thinner or mineral spirits.

Storage:

  • Always store at room temperature. If stored at high temperature, cool to room temperature before use. Keep from freezing. 

Application Hints:

  • Read the "HOW TO" tab of this listing for application hints.

Surface Preparation:

  1. Properly prepare surface according to NWFA approved methods. Use a No. 100 grit screen for the final screening cut. 
  2. Remove all dust  with a broom and/or vacuum and tack the surface with a clean cloth moistened with mineral spirits. 

Application:

  1. Stir or shake material thoroughly before and occasionally during use. Apply a test sample on  a small inconspicuous area before proceeding with the entire job. If desired DuraSeal Quick Coat Penetrating Finish in Neutral can be used to lighten any standard DuraSeal wood tone.
  2. Apply the first coat of DuraSeal Quick Coat Penetrating Finish liberally with a brush, lamb wool applicator or cloth at a coverage rate of approximately 500 square feet per gallon.
  3. Allow to penetrate for 5-8 minutes then remove any excess by wiping with rags or by buffing with #2 steel wool. Removal of all excess material is essential to ensure proper dry time and adhesion of the finish coat. 
  4. If desired, apply a thin second coat at a coverage rate of approximately 800 square feet per gallon. Allow to penetrate and remove excess material in the same manner as the first coat [step 3 above].
  5. Allow the final coat to dry at least 2 hours and apply a DuraSeal finish coat of your choice. 

Maintenance:

  • Regularly remove dust  and dirt by sweeping or vacuuming. Periodic buffing will renew luster. Exceptionally worn areas may require an additional finish coat. Maintained floors sealed only with DuraSeal Quick Coat Penetrating Finish with DuraSeal Renovator Cleaner and Reconditioner.
Materials Check-list:

To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Listed below are a few recommended tools.

(MSDS)

(PDS)

(California Prop 65 Labeling Requirements)

Click the link below to see a short video of this product in use and for some ideas for how to get the best results. 

DuraSeal Quick Coat Stain - Rosewood Quart

Manufacturer: DuraSeal
Product ID: 861390000
Price: $16.49
QTY Add to cart
DuraSeal Quick Coat Penetrating Finish
Rosewood Quart
 
DuraSeal Quick Coat Penetrating Finish is a semi-transparent stain. This product is formulated to seal, color and provide exceptional durability when used on bare wood or masonry surfaces. This rich blend of oil and resin gives hardwood floors a soft, satiny sheen. Its unique formulation provides a surface that can be topcoated in two hours. DuraSeal Quick Coat Penetrating Finish is available in existing DuraSeal colors as well as many Certified Minwax colors. It can be used with or without a finish coat, and is compatible with all DuraSeal  water-borne and oil-modified finish system.


Materials Check-list:
  • To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Please click the "Materials" tab  to locate the materials check-list for a list of the recommended  tools.

Color:

  • DuraSeal Quick Coat Penetrating Finish gives hardwood floors a soft, satiny sheen. 

Coverage:

  • DuraSeal Quick Coat Penetrating Finish covers approximately 500 square feet per gallon. While a second coat is optional, this product will cover approximately 800 square feet per gallon. 

Dry Time and Cure:

  • DuraSeal Quick Coat Penetrating Finish dries in approximately 2-3 hours. Note: Dry time is based on conditions of 77 F and 50% relative humidity. 

Clean-up:

  • Clean equipment using paint thinner or mineral spirits.

Storage:

  • Always store at room temperature. If stored at high temperature, cool to room temperature before use. Keep from freezing. 

Application Hints:

  • Read the "HOW TO" tab of this listing for application hints.

Surface Preparation:

  1. Properly prepare surface according to NWFA approved methods. Use a No. 100 grit screen for the final screening cut. 
  2. Remove all dust  with a broom and/or vacuum and tack the surface with a clean cloth moistened with mineral spirits. 

Application:

  1. Stir or shake material thoroughly before and occasionally during use. Apply a test sample on  a small inconspicuous area before proceeding with the entire job. If desired DuraSeal Quick Coat Penetrating Finish in Neutral can be used to lighten any standard DuraSeal wood tone.
  2. Apply the first coat of DuraSeal Quick Coat Penetrating Finish liberally with a brush, lamb wool applicator or cloth at a coverage rate of approximately 500 square feet per gallon.
  3. Allow to penetrate for 5-8 minutes then remove any excess by wiping with rags or by buffing with #2 steel wool. Removal of all excess material is essential to ensure proper dry time and adhesion of the finish coat. 
  4. If desired, apply a thin second coat at a coverage rate of approximately 800 square feet per gallon. Allow to penetrate and remove excess material in the same manner as the first coat [step 3 above].
  5. Allow the final coat to dry at least 2 hours and apply a DuraSeal finish coat of your choice. 

Maintenance:

  • Regularly remove dust  and dirt by sweeping or vacuuming. Periodic buffing will renew luster. Exceptionally worn areas may require an additional finish coat. Maintained floors sealed only with DuraSeal Quick Coat Penetrating Finish with DuraSeal Renovator Cleaner and Reconditioner.
Materials Check-list:

To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Listed below are a few recommended tools.

(MSDS)

(PDS)

(California Prop 65 Labeling Requirements)

Click the link below to see a short video of this product in use and for some ideas for how to get the best results. 

DuraSeal Quick Coat Stain - Royal Mahogany Quart

Manufacturer: DuraSeal
Product ID: 861080000
Price: $16.49
QTY Add to cart
DuraSeal Quick Coat Penetrating Finish
Royal Mahogany Quart
 
DuraSeal Quick Coat Penetrating Finish is a semi-transparent stain. This product is formulated to seal, color and provide exceptional durability when used on bare wood or masonry surfaces. This rich blend of oil and resin gives hardwood floors a soft, satiny sheen. Its unique formulation provides a surface that can be topcoated in two hours. DuraSeal Quick Coat Penetrating Finish is available in existing DuraSeal colors as well as many Certified Minwax colors. It can be used with or without a finish coat, and is compatible with all DuraSeal  water-borne and oil-modified finish system.


Materials Check-list:
  • To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Please click the "Materials" tab  to locate the materials check-list for a list of the recommended  tools.

Color:

  • DuraSeal Quick Coat Penetrating Finish gives hardwood floors a soft, satiny sheen. 

Coverage:

  • DuraSeal Quick Coat Penetrating Finish covers approximately 500 square feet per gallon. While a second coat is optional, this product will cover approximately 800 square feet per gallon. 

Dry Time and Cure:

  • DuraSeal Quick Coat Penetrating Finish dries in approximately 2-3 hours. Note: Dry time is based on conditions of 77 F and 50% relative humidity. 

Clean-up:

  • Clean equipment using paint thinner or mineral spirits.

Storage:

  • Always store at room temperature. If stored at high temperature, cool to room temperature before use. Keep from freezing. 

Application Hints:

  • Read the "HOW TO" tab of this listing for application hints.

Surface Preparation:

  1. Properly prepare surface according to NWFA approved methods. Use a No. 100 grit screen for the final screening cut. 
  2. Remove all dust  with a broom and/or vacuum and tack the surface with a clean cloth moistened with mineral spirits. 

Application:

  1. Stir or shake material thoroughly before and occasionally during use. Apply a test sample on  a small inconspicuous area before proceeding with the entire job. If desired DuraSeal Quick Coat Penetrating Finish in Neutral can be used to lighten any standard DuraSeal wood tone.
  2. Apply the first coat of DuraSeal Quick Coat Penetrating Finish liberally with a brush, lamb wool applicator or cloth at a coverage rate of approximately 500 square feet per gallon.
  3. Allow to penetrate for 5-8 minutes then remove any excess by wiping with rags or by buffing with #2 steel wool. Removal of all excess material is essential to ensure proper dry time and adhesion of the finish coat. 
  4. If desired, apply a thin second coat at a coverage rate of approximately 800 square feet per gallon. Allow to penetrate and remove excess material in the same manner as the first coat [step 3 above].
  5. Allow the final coat to dry at least 2 hours and apply a DuraSeal finish coat of your choice. 

Maintenance:

  • Regularly remove dust  and dirt by sweeping or vacuuming. Periodic buffing will renew luster. Exceptionally worn areas may require an additional finish coat. Maintained floors sealed only with DuraSeal Quick Coat Penetrating Finish with DuraSeal Renovator Cleaner and Reconditioner.
Materials Check-list:

To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Listed below are a few recommended tools.

(MSDS)

(PDS)

(California Prop 65 Labeling Requirements)

Click the link below to see a short video of this product in use and for some ideas for how to get the best results. 

DuraSeal Quick Coat Stain - Special Walnut Quart

Manufacturer: DuraSeal
Product ID: 861240000
Price: $16.49
QTY Add to cart
DuraSeal Quick Coat Penetrating Finish
Special Walnut Quart
 
DuraSeal Quick Coat Penetrating Finish is a semi-transparent stain. This product is formulated to seal, color and provide exceptional durability when used on bare wood or masonry surfaces. This rich blend of oil and resin gives hardwood floors a soft, satiny sheen. Its unique formulation provides a surface that can be topcoated in two hours. DuraSeal Quick Coat Penetrating Finish is available in existing DuraSeal colors as well as many Certified Minwax colors. It can be used with or without a finish coat, and is compatible with all DuraSeal  water-borne and oil-modified finish system.


Materials Check-list:
  • To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Please click the "Materials" tab  to locate the materials check-list for a list of the recommended  tools.

Color:

  • DuraSeal Quick Coat Penetrating Finish gives hardwood floors a soft, satiny sheen. 

Coverage:

  • DuraSeal Quick Coat Penetrating Finish covers approximately 500 square feet per gallon. While a second coat is optional, this product will cover approximately 800 square feet per gallon. 

Dry Time and Cure:

  • DuraSeal Quick Coat Penetrating Finish dries in approximately 2-3 hours. Note: Dry time is based on conditions of 77 F and 50% relative humidity. 

Clean-up:

  • Clean equipment using paint thinner or mineral spirits.

Storage:

  • Always store at room temperature. If stored at high temperature, cool to room temperature before use. Keep from freezing. 

Application Hints:

  • Read the "HOW TO" tab of this listing for application hints.

Surface Preparation:

  1. Properly prepare surface according to NWFA approved methods. Use a No. 100 grit screen for the final screening cut. 
  2. Remove all dust  with a broom and/or vacuum and tack the surface with a clean cloth moistened with mineral spirits. 

Application:

  1. Stir or shake material thoroughly before and occasionally during use. Apply a test sample on  a small inconspicuous area before proceeding with the entire job. If desired DuraSeal Quick Coat Penetrating Finish in Neutral can be used to lighten any standard DuraSeal wood tone.
  2. Apply the first coat of DuraSeal Quick Coat Penetrating Finish liberally with a brush, lamb wool applicator or cloth at a coverage rate of approximately 500 square feet per gallon.
  3. Allow to penetrate for 5-8 minutes then remove any excess by wiping with rags or by buffing with #2 steel wool. Removal of all excess material is essential to ensure proper dry time and adhesion of the finish coat. 
  4. If desired, apply a thin second coat at a coverage rate of approximately 800 square feet per gallon. Allow to penetrate and remove excess material in the same manner as the first coat [step 3 above].
  5. Allow the final coat to dry at least 2 hours and apply a DuraSeal finish coat of your choice. 

Maintenance:

  • Regularly remove dust  and dirt by sweeping or vacuuming. Periodic buffing will renew luster. Exceptionally worn areas may require an additional finish coat. Maintained floors sealed only with DuraSeal Quick Coat Penetrating Finish with DuraSeal Renovator Cleaner and Reconditioner.
Materials Check-list:

To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Listed below are a few recommended tools.

(MSDS)

(PDS)

(California Prop 65 Labeling Requirements)

Click the link below to see a short video of this product in use and for some ideas for how to get the best results. 

DuraSeal Quick Coat Stain - Spice Brown Quart

Manufacturer: DuraSeal
Product ID: 861370000
Price: $16.49
QTY Add to cart
DuraSeal Quick Coat Penetrating Finish
Spice Brown Quart
 
DuraSeal Quick Coat Penetrating Finish is a semi-transparent stain. This product is formulated to seal, color and provide exceptional durability when used on bare wood or masonry surfaces. This rich blend of oil and resin gives hardwood floors a soft, satiny sheen. Its unique formulation provides a surface that can be topcoated in two hours. DuraSeal Quick Coat Penetrating Finish is available in existing DuraSeal colors as well as many Certified Minwax colors. It can be used with or without a finish coat, and is compatible with all DuraSeal  water-borne and oil-modified finish system.


Materials Check-list:
  • To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Please click the "Materials" tab  to locate the materials check-list for a list of the recommended  tools.

Color:

  • DuraSeal Quick Coat Penetrating Finish gives hardwood floors a soft, satiny sheen. 

Coverage:

  • DuraSeal Quick Coat Penetrating Finish covers approximately 500 square feet per gallon. While a second coat is optional, this product will cover approximately 800 square feet per gallon. 

Dry Time and Cure:

  • DuraSeal Quick Coat Penetrating Finish dries in approximately 2-3 hours. Note: Dry time is based on conditions of 77 F and 50% relative humidity. 

Clean-up:

  • Clean equipment using paint thinner or mineral spirits.

Storage:

  • Always store at room temperature. If stored at high temperature, cool to room temperature before use. Keep from freezing. 

Application Hints:

  • Read the "HOW TO" tab of this listing for application hints.

Surface Preparation:

  1. Properly prepare surface according to NWFA approved methods. Use a No. 100 grit screen for the final screening cut. 
  2. Remove all dust  with a broom and/or vacuum and tack the surface with a clean cloth moistened with mineral spirits. 

Application:

  1. Stir or shake material thoroughly before and occasionally during use. Apply a test sample on  a small inconspicuous area before proceeding with the entire job. If desired DuraSeal Quick Coat Penetrating Finish in Neutral can be used to lighten any standard DuraSeal wood tone.
  2. Apply the first coat of DuraSeal Quick Coat Penetrating Finish liberally with a brush, lamb wool applicator or cloth at a coverage rate of approximately 500 square feet per gallon.
  3. Allow to penetrate for 5-8 minutes then remove any excess by wiping with rags or by buffing with #2 steel wool. Removal of all excess material is essential to ensure proper dry time and adhesion of the finish coat. 
  4. If desired, apply a thin second coat at a coverage rate of approximately 800 square feet per gallon. Allow to penetrate and remove excess material in the same manner as the first coat [step 3 above].
  5. Allow the final coat to dry at least 2 hours and apply a DuraSeal finish coat of your choice. 

Maintenance:

  • Regularly remove dust  and dirt by sweeping or vacuuming. Periodic buffing will renew luster. Exceptionally worn areas may require an additional finish coat. Maintained floors sealed only with DuraSeal Quick Coat Penetrating Finish with DuraSeal Renovator Cleaner and Reconditioner.
Materials Check-list:

To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Listed below are a few recommended tools.

(MSDS)

(PDS)

(California Prop 65 Labeling Requirements)

Click the link below to see a short video of this product in use and for some ideas for how to get the best results. 

DuraSeal Quick Coat Stain - True Black Quart

Manufacturer: Sherwin-Williams
Product ID: 861990000
Price: $16.49
QTY Add to cart
DuraSeal Quick Coat Penetrating Finish
True Black Quart
 
DuraSeal Quick Coat Penetrating Finish is a semi-transparent stain. This product is formulated to seal, color and provide exceptional durability when used on bare wood or masonry surfaces. This rich blend of oil and resin gives hardwood floors a soft, satiny sheen. Its unique formulation provides a surface that can be topcoated in two hours. DuraSeal Quick Coat Penetrating Finish is available in existing DuraSeal colors as well as many Certified Minwax colors. It can be used with or without a finish coat, and is compatible with all DuraSeal  water-borne and oil-modified finish system.
Materials Check-list:
  • To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Please click the "Materials" tab  to locate the materials check-list for a list of the recommended  tools.

Color:

  • DuraSeal Quick Coat Penetrating Finish gives hardwood floors a soft, satiny sheen. 

Coverage:

  • DuraSeal Quick Coat Penetrating Finish covers approximately 500 square feet per gallon. While a second coat is optional, this product will cover approximately 800 square feet per gallon. 

Dry Time and Cure:

  • DuraSeal Quick Coat Penetrating Finish dries in approximately 2-3 hours. Note: Dry time is based on conditions of 77 F and 50% relative humidity. 

Clean-up:

  • Clean equipment using paint thinner or mineral spirits.

Storage:

  • Always store at room temperature. If stored at high temperature, cool to room temperature before use. Keep from freezing. 

Application Hints:

  • Read the "HOW TO" tab of this listing for application hints.

Surface Preparation:

  1. Properly prepare surface according to NWFA approved methods. Use a No. 100 grit screen for the final screening cut. 
  2. Remove all dust  with a broom and/or vacuum and tack the surface with a clean cloth moistened with mineral spirits. 

Application:

  1. Stir or shake material thoroughly before and occasionally during use. Apply a test sample on  a small inconspicuous area before proceeding with the entire job. If desired DuraSeal Quick Coat Penetrating Finish in Neutral can be used to lighten any standard DuraSeal wood tone.
  2. Apply the first coat of DuraSeal Quick Coat Penetrating Finish liberally with a brush, lamb wool applicator or cloth at a coverage rate of approximately 500 square feet per gallon.
  3. Allow to penetrate for 5-8 minutes then remove any excess by wiping with rags or by buffing with #2 steel wool. Removal of all excess material is essential to ensure proper dry time and adhesion of the finish coat. 
  4. If desired, apply a thin second coat at a coverage rate of approximately 800 square feet per gallon. Allow to penetrate and remove excess material in the same manner as the first coat [step 3 above].
  5. Allow the final coat to dry at least 2 hours and apply a DuraSeal finish coat of your choice. 

Maintenance:

  • Regularly remove dust  and dirt by sweeping or vacuuming. Periodic buffing will renew luster. Exceptionally worn areas may require an additional finish coat. Maintained floors sealed only with DuraSeal Quick Coat Penetrating Finish with DuraSeal Renovator Cleaner and Reconditioner.
Materials Check-list:

To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Listed below are a few recommended tools.

(MSDS)

(PDS)

(California Prop 65 Labeling Requirements)

Click the link below to see a short video of this product in use and for some ideas for how to get the best results. 

DuraSeal Quick Coat Stain - Weathered Oak Quart

Manufacturer: DuraSeal
Product ID: 86170000
Price: $16.49
QTY Add to cart
DuraSeal Quick Coat Penetrating Finish
Weathered Oak Quart
 
DuraSeal Quick Coat Penetrating Finish is a semi-transparent stain. This product is formulated to seal, color and provide exceptional durability when used on bare wood or masonry surfaces. This rich blend of oil and resin gives hardwood floors a soft, satiny sheen. Its unique formulation provides a surface that can be topcoated in two hours. DuraSeal Quick Coat Penetrating Finish is available in existing DuraSeal colors as well as many Certified Minwax colors. It can be used with or without a finish coat, and is compatible with all DuraSeal  water-borne and oil-modified finish system.
Materials Check-list:
  • To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Please click the "Materials" tab  to locate the materials check-list for a list of the recommended  tools.

Color:

  • DuraSeal Quick Coat Penetrating Finish gives hardwood floors a soft, satiny sheen. 

Coverage:

  • DuraSeal Quick Coat Penetrating Finish covers approximately 500 square feet per gallon. While a second coat is optional, this product will cover approximately 800 square feet per gallon. 

Dry Time and Cure:

  • DuraSeal Quick Coat Penetrating Finish dries in approximately 2-3 hours. Note: Dry time is based on conditions of 77 F and 50% relative humidity. 

Clean-up:

  • Clean equipment using paint thinner or mineral spirits.

Storage:

  • Always store at room temperature. If stored at high temperature, cool to room temperature before use. Keep from freezing. 

Application Hints:

  • Read the "HOW TO" tab of this listing for application hints.

Surface Preparation:

  1. Properly prepare surface according to NWFA approved methods. Use a No. 100 grit screen for the final screening cut. 
  2. Remove all dust  with a broom and/or vacuum and tack the surface with a clean cloth moistened with mineral spirits. 

Application:

  1. Stir or shake material thoroughly before and occasionally during use. Apply a test sample on  a small inconspicuous area before proceeding with the entire job. If desired DuraSeal Quick Coat Penetrating Finish in Neutral can be used to lighten any standard DuraSeal wood tone.
  2. Apply the first coat of DuraSeal Quick Coat Penetrating Finish liberally with a brush, lamb wool applicator or cloth at a coverage rate of approximately 500 square feet per gallon.
  3. Allow to penetrate for 5-8 minutes then remove any excess by wiping with rags or by buffing with #2 steel wool. Removal of all excess material is essential to ensure proper dry time and adhesion of the finish coat. 
  4. If desired, apply a thin second coat at a coverage rate of approximately 800 square feet per gallon. Allow to penetrate and remove excess material in the same manner as the first coat [step 3 above].
  5. Allow the final coat to dry at least 2 hours and apply a DuraSeal finish coat of your choice. 

Maintenance:

  • Regularly remove dust  and dirt by sweeping or vacuuming. Periodic buffing will renew luster. Exceptionally worn areas may require an additional finish coat. Maintained floors sealed only with DuraSeal Quick Coat Penetrating Finish with DuraSeal Renovator Cleaner and Reconditioner.
Materials Check-list:

To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Listed below are a few recommended tools.

(MSDS)

(PDS)

(California Prop 65 Labeling Requirements)

Click the link below to see a short video of this product in use and for some ideas for how to get the best results. 

DuraSeal Quick Coat Stain - Nutmeg Quart

Manufacturer: DuraSeal
Product ID: 861020000
Price: $16.49
QTY Add to cart
DuraSeal Quick Coat Penetrating Finish
Nutmeg Quart
 
DuraSeal Quick Coat Penetrating Finish is a semi-transparent stain. This product is formulated to seal, color and provide exceptional durability when used on bare wood or masonry surfaces. This rich blend of oil and resin gives hardwood floors a soft, satiny sheen. Its unique formulation provides a surface that can be topcoated in two hours. DuraSeal Quick Coat Penetrating Finish is available in existing DuraSeal colors as well as many Certified Minwax colors. It can be used with or without a finish coat, and is compatible with all DuraSeal  water-borne and oil-modified finish system.

 


 

Materials Check-list:
  • To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Please click the "Materials" tab  to locate the materials check-list for a list of the recommended  tools.

Color:

  • DuraSeal Quick Coat Penetrating Finish gives hardwood floors a soft, satiny sheen. 

Coverage:

  • DuraSeal Quick Coat Penetrating Finish covers approximately 500 square feet per gallon. While a second coat is optional, this product will cover approximately 800 square feet per gallon. 

Dry Time and Cure:

  • DuraSeal Quick Coat Penetrating Finish dries in approximately 2-3 hours. Note: Dry time is based on conditions of 77 F and 50% relative humidity. 

Clean-up:

  • Clean equipment using paint thinner or mineral spirits.

Storage:

  • Always store at room temperature. If stored at high temperature, cool to room temperature before use. Keep from freezing. 

Application Hints:

  • Read the "HOW TO" tab of this listing for application hints.

Surface Preparation:

  1. Properly prepare surface according to NWFA approved methods. Use a No. 100 grit screen for the final screening cut. 
  2. Remove all dust  with a broom and/or vacuum and tack the surface with a clean cloth moistened with mineral spirits. 

Application:

  1. Stir or shake material thoroughly before and occasionally during use. Apply a test sample on  a small inconspicuous area before proceeding with the entire job. If desired DuraSeal Quick Coat Penetrating Finish in Neutral can be used to lighten any standard DuraSeal wood tone.
  2. Apply the first coat of DuraSeal Quick Coat Penetrating Finish liberally with a brush, lamb wool applicator or cloth at a coverage rate of approximately 500 square feet per gallon.
  3. Allow to penetrate for 5-8 minutes then remove any excess by wiping with rags or by buffing with #2 steel wool. Removal of all excess material is essential to ensure proper dry time and adhesion of the finish coat. 
  4. If desired, apply a thin second coat at a coverage rate of approximately 800 square feet per gallon. Allow to penetrate and remove excess material in the same manner as the first coat [step 3 above].
  5. Allow the final coat to dry at least 2 hours and apply a DuraSeal finish coat of your choice. 

Maintenance:

  • Regularly remove dust  and dirt by sweeping or vacuuming. Periodic buffing will renew luster. Exceptionally worn areas may require an additional finish coat. Maintained floors sealed only with DuraSeal Quick Coat Penetrating Finish with DuraSeal Renovator Cleaner and Reconditioner.
Materials Check-list:

To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Listed below are a few recommended tools.

(MSDS)

(PDS)

(California Prop 65 Labeling Requirements)

Click the link below to see a short video of this product in use and for some ideas for how to get the best results. 

DuraSeal Quick Coat Stain - Sedona Red Quart

Manufacturer: DuraSeal
Product ID: 861430000
Price: $16.49
QTY Add to cart
DuraSeal Quick Coat Penetrating Finish
Sedona Red Quart
 
DuraSeal Quick Coat Penetrating Finish is a semi-transparent stain. This product is formulated to seal, color and provide exceptional durability when used on bare wood or masonry surfaces. This rich blend of oil and resin gives hardwood floors a soft, satiny sheen. Its unique formulation provides a surface that can be topcoated in two hours. DuraSeal Quick Coat Penetrating Finish is available in existing DuraSeal colors as well as many Certified Minwax colors. It can be used with or without a finish coat, and is compatible with all DuraSeal  water-borne and oil-modified finish system.
Materials Check-list:
  • To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Please click the "Materials" tab  to locate the materials check-list for a list of the recommended  tools.

Color:

  • DuraSeal Quick Coat Penetrating Finish gives hardwood floors a soft, satiny sheen. 

Coverage:

  • DuraSeal Quick Coat Penetrating Finish covers approximately 500 square feet per gallon. While a second coat is optional, this product will cover approximately 800 square feet per gallon. 

Dry Time and Cure:

  • DuraSeal Quick Coat Penetrating Finish dries in approximately 2-3 hours. Note: Dry time is based on conditions of 77 F and 50% relative humidity. 

Clean-up:

  • Clean equipment using paint thinner or mineral spirits.

Storage:

  • Always store at room temperature. If stored at high temperature, cool to room temperature before use. Keep from freezing. 

Application Hints:

  • Read the "HOW TO" tab of this listing for application hints.

Surface Preparation:

  1. Properly prepare surface according to NWFA approved methods. Use a No. 100 grit screen for the final screening cut. 
  2. Remove all dust  with a broom and/or vacuum and tack the surface with a clean cloth moistened with mineral spirits. 

Application:

  1. Stir or shake material thoroughly before and occasionally during use. Apply a test sample on  a small inconspicuous area before proceeding with the entire job. If desired DuraSeal Quick Coat Penetrating Finish in Neutral can be used to lighten any standard DuraSeal wood tone.
  2. Apply the first coat of DuraSeal Quick Coat Penetrating Finish liberally with a brush, lamb wool applicator or cloth at a coverage rate of approximately 500 square feet per gallon.
  3. Allow to penetrate for 5-8 minutes then remove any excess by wiping with rags or by buffing with #2 steel wool. Removal of all excess material is essential to ensure proper dry time and adhesion of the finish coat. 
  4. If desired, apply a thin second coat at a coverage rate of approximately 800 square feet per gallon. Allow to penetrate and remove excess material in the same manner as the first coat [step 3 above].
  5. Allow the final coat to dry at least 2 hours and apply a DuraSeal finish coat of your choice. 

Maintenance:

  • Regularly remove dust  and dirt by sweeping or vacuuming. Periodic buffing will renew luster. Exceptionally worn areas may require an additional finish coat. Maintained floors sealed only with DuraSeal Quick Coat Penetrating Finish with DuraSeal Renovator Cleaner and Reconditioner.
Materials Check-list:

To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Listed below are a few recommended tools.

(MSDS)

(PDS)

(California Prop 65 Labeling Requirements)

Click the link below to see a short video of this product in use and for some ideas for how to get the best results.