DuraSeal Quick Coat Stain - Antique Brown Gallon

Manufacturer: DuraSeal
Product ID: 811160000
Price: $46.15
QTY Add to cart
DuraSeal Quick Coat Penetrating Finish
Antique Brown Gallon
 
DuraSeal Quick Coat Penetrating Finish is a semi-transparent stain. This product is formulated to seal, color and provide exceptional durability when used on bare wood or masonry surfaces. This rich blend of oil and resin gives hardwood floors a soft, satiny sheen. Its unique formulation provides a surface that can be topcoated in two hours. DuraSeal Quick Coat Penetrating Finish is available in existing DuraSeal colors as well as many Certified Minwax colors. It can be used with or without a finish coat, and is compatible with all DuraSeal  water-borne and oil-modified finish system.


Materials Check-list:
  • To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Please click the "Materials" tab  to locate the materials check-list for a list of the recommended  tools.

Color:

  • DuraSeal Quick Coat Penetrating Finish gives hardwood floors a soft, satiny sheen. 

Coverage:

  • DuraSeal Quick Coat Penetrating Finish covers approximately 500 square feet per gallon. While a second coat is optional, this product will cover approximately 800 square feet per gallon. 

Dry Time and Cure:

  • DuraSeal Quick Coat Penetrating Finish dries in approximately 2-3 hours. Note: Dry time is based on conditions of 77 F and 50% relative humidity. 

Clean-up:

  • Clean equipment using paint thinner or mineral spirits.

Storage:

  • Always store at room temperature. If stored at high temperature, cool to room temperature before use. Keep from freezing. 

Application Hints:

  • Read the "HOW TO" tab of this listing for application hints.

Surface Preparation:

  1. Properly prepare surface according to NWFA approved methods. Use a No. 100 grit screen for the final screening cut. 
  2. Remove all dust  with a broom and/or vacuum and tack the surface with a clean cloth moistened with mineral spirits. 

Application:

  1. Stir or shake material thoroughly before and occasionally during use. Apply a test sample on  a small inconspicuous area before proceeding with the entire job. If desired DuraSeal Quick Coat Penetrating Finish in Neutral can be used to lighten any standard DuraSeal wood tone.
  2. Apply the first coat of DuraSeal Quick Coat Penetrating Finish liberally with a brush, lamb wool applicator or cloth at a coverage rate of approximately 500 square feet per gallon.
  3. Allow to penetrate for 5-8 minutes then remove any excess by wiping with rags or by buffing with #2 steel wool. Removal of all excess material is essential to ensure proper dry time and adhesion of the finish coat. 
  4. If desired, apply a thin second coat at a coverage rate of approximately 800 square feet per gallon. Allow to penetrate and remove excess material in the same manner as the first coat [step 3 above].
  5. Allow the final coat to dry at least 2 hours and apply a DuraSeal finish coat of your choice. 

Maintenance:

  • Regularly remove dust  and dirt by sweeping or vacuuming. Periodic buffing will renew luster. Exceptionally worn areas may require an additional finish coat. Maintained floors sealed only with DuraSeal Quick Coat Penetrating Finish with DuraSeal Renovator Cleaner and Reconditioner.
Materials Check-list:

To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Listed below are a few recommended tools.

(MSDS)

(PDS)

(California Prop 65 Labeling Requirements)

Click the link below to see a short video of this product in use and for some ideas for how to get the best results. 

DuraSeal Quick Coat Stain - Cherry Gallon

Manufacturer: DuraSeal
Product ID: 811350000
Price: $46.15
QTY Add to cart
DuraSeal Quick Coat Penetrating Finish
Cherry Gallon
 
DuraSeal Quick Coat Penetrating Finish is a semi-transparent stain. This product is formulated to seal, color and provide exceptional durability when used on bare wood or masonry surfaces. This rich blend of oil and resin gives hardwood floors a soft, satiny sheen. Its unique formulation provides a surface that can be topcoated in two hours. DuraSeal Quick Coat Penetrating Finish is available in existing DuraSeal colors as well as many Certified Minwax colors. It can be used with or without a finish coat, and is compatible with all DuraSeal  water-borne and oil-modified finish system.
Materials Check-list:
  • To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Please click the "Materials" tab  to locate the materials check-list for a list of the recommended  tools.

Color:

  • DuraSeal Quick Coat Penetrating Finish gives hardwood floors a soft, satiny sheen. 

Coverage:

  • DuraSeal Quick Coat Penetrating Finish covers approximately 500 square feet per gallon. While a second coat is optional, this product will cover approximately 800 square feet per gallon. 

Dry Time and Cure:

  • DuraSeal Quick Coat Penetrating Finish dries in approximately 2-3 hours. Note: Dry time is based on conditions of 77 F and 50% relative humidity. 

Clean-up:

  • Clean equipment using paint thinner or mineral spirits.

Storage:

  • Always store at room temperature. If stored at high temperature, cool to room temperature before use. Keep from freezing. 

Application Hints:

  • Read the "HOW TO" tab of this listing for application hints.

Surface Preparation:

  1. Properly prepare surface according to NWFA approved methods. Use a No. 100 grit screen for the final screening cut. 
  2. Remove all dust  with a broom and/or vacuum and tack the surface with a clean cloth moistened with mineral spirits. 

Application:

  1. Stir or shake material thoroughly before and occasionally during use. Apply a test sample on  a small inconspicuous area before proceeding with the entire job. If desired DuraSeal Quick Coat Penetrating Finish in Neutral can be used to lighten any standard DuraSeal wood tone.
  2. Apply the first coat of DuraSeal Quick Coat Penetrating Finish liberally with a brush, lamb wool applicator or cloth at a coverage rate of approximately 500 square feet per gallon.
  3. Allow to penetrate for 5-8 minutes then remove any excess by wiping with rags or by buffing with #2 steel wool. Removal of all excess material is essential to ensure proper dry time and adhesion of the finish coat. 
  4. If desired, apply a thin second coat at a coverage rate of approximately 800 square feet per gallon. Allow to penetrate and remove excess material in the same manner as the first coat [step 3 above].
  5. Allow the final coat to dry at least 2 hours and apply a DuraSeal finish coat of your choice. 

Maintenance:

  • Regularly remove dust  and dirt by sweeping or vacuuming. Periodic buffing will renew luster. Exceptionally worn areas may require an additional finish coat. Maintained floors sealed only with DuraSeal Quick Coat Penetrating Finish with DuraSeal Renovator Cleaner and Reconditioner.
Materials Check-list:

To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Listed below are a few recommended tools.

(MSDS)

(PDS)

(California Prop 65 Labeling Requirements)

Click the link below to see a short video of this product in use and for some ideas for how to get the best results. 

DuraSeal Quick Coat Stain - Chestnut Gallon

Manufacturer: DuraSeal
Product ID: 811040000
Price: $46.15
QTY Add to cart
DuraSeal Quick Coat Penetrating Finish
Chestnut Gallon
 
DuraSeal Quick Coat Penetrating Finish is a semi-transparent stain. This product is formulated to seal, color and provide exceptional durability when used on bare wood or masonry surfaces. This rich blend of oil and resin gives hardwood floors a soft, satiny sheen. Its unique formulation provides a surface that can be topcoated in two hours. DuraSeal Quick Coat Penetrating Finish is available in existing DuraSeal colors as well as many Certified Minwax colors. It can be used with or without a finish coat, and is compatible with all DuraSeal  water-borne and oil-modified finish system.


Materials Check-list:
  • To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Please click the "Materials" tab  to locate the materials check-list for a list of the recommended  tools.

Color:

  • DuraSeal Quick Coat Penetrating Finish gives hardwood floors a soft, satiny sheen. 

Coverage:

  • DuraSeal Quick Coat Penetrating Finish covers approximately 500 square feet per gallon. While a second coat is optional, this product will cover approximately 800 square feet per gallon. 

Dry Time and Cure:

  • DuraSeal Quick Coat Penetrating Finish dries in approximately 2-3 hours. Note: Dry time is based on conditions of 77 F and 50% relative humidity. 

Clean-up:

  • Clean equipment using paint thinner or mineral spirits.

Storage:

  • Always store at room temperature. If stored at high temperature, cool to room temperature before use. Keep from freezing. 

Application Hints:

  • Read the "HOW TO" tab of this listing for application hints.

Surface Preparation:

  1. Properly prepare surface according to NWFA approved methods. Use a No. 100 grit screen for the final screening cut. 
  2. Remove all dust  with a broom and/or vacuum and tack the surface with a clean cloth moistened with mineral spirits. 

Application:

  1. Stir or shake material thoroughly before and occasionally during use. Apply a test sample on  a small inconspicuous area before proceeding with the entire job. If desired DuraSeal Quick Coat Penetrating Finish in Neutral can be used to lighten any standard DuraSeal wood tone.
  2. Apply the first coat of DuraSeal Quick Coat Penetrating Finish liberally with a brush, lamb wool applicator or cloth at a coverage rate of approximately 500 square feet per gallon.
  3. Allow to penetrate for 5-8 minutes then remove any excess by wiping with rags or by buffing with #2 steel wool. Removal of all excess material is essential to ensure proper dry time and adhesion of the finish coat. 
  4. If desired, apply a thin second coat at a coverage rate of approximately 800 square feet per gallon. Allow to penetrate and remove excess material in the same manner as the first coat [step 3 above].
  5. Allow the final coat to dry at least 2 hours and apply a DuraSeal finish coat of your choice. 

Maintenance:

  • Regularly remove dust  and dirt by sweeping or vacuuming. Periodic buffing will renew luster. Exceptionally worn areas may require an additional finish coat. Maintained floors sealed only with DuraSeal Quick Coat Penetrating Finish with DuraSeal Renovator Cleaner and Reconditioner.
Materials Check-list:

To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Listed below are a few recommended tools.

(MSDS)

(PDS)

(California Prop 65 Labeling Requirements)

Click the link below to see a short video of this product in use and for some ideas for how to get the best results. 

DuraSeal Quick Coat Stain - Classic Grey/Gray Gallon

Manufacturer: DuraSeal
Product ID: 81172000
Price: $46.15
QTY Add to cart
DuraSeal Quick Coat Penetrating Finish
Classic Grey/Gray Gallon
 
DuraSeal Quick Coat Penetrating Finish is a semi-transparent stain. This product is formulated to seal, color and provide exceptional durability when used on bare wood or masonry surfaces. This rich blend of oil and resin gives hardwood floors a soft, satiny sheen. Its unique formulation provides a surface that can be topcoated in two hours. DuraSeal Quick Coat Penetrating Finish is available in existing DuraSeal colors as well as many Certified Minwax colors. It can be used with or without a finish coat, and is compatible with all DuraSeal  water-borne and oil-modified finish system.
Materials Check-list:
  • To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Please click the "Materials" tab  to locate the materials check-list for a list of the recommended  tools.

Color:

  • DuraSeal Quick Coat Penetrating Finish gives hardwood floors a soft, satiny sheen. 

Coverage:

  • DuraSeal Quick Coat Penetrating Finish covers approximately 500 square feet per gallon. While a second coat is optional, this product will cover approximately 800 square feet per gallon. 

Dry Time and Cure:

  • DuraSeal Quick Coat Penetrating Finish dries in approximately 2-3 hours. Note: Dry time is based on conditions of 77 F and 50% relative humidity. 

Clean-up:

  • Clean equipment using paint thinner or mineral spirits.

Storage:

  • Always store at room temperature. If stored at high temperature, cool to room temperature before use. Keep from freezing. 

Application Hints:

  • Read the "HOW TO" tab of this listing for application hints.

Surface Preparation:

  1. Properly prepare surface according to NWFA approved methods. Use a No. 100 grit screen for the final screening cut. 
  2. Remove all dust  with a broom and/or vacuum and tack the surface with a clean cloth moistened with mineral spirits. 

Application:

  1. Stir or shake material thoroughly before and occasionally during use. Apply a test sample on  a small inconspicuous area before proceeding with the entire job. If desired DuraSeal Quick Coat Penetrating Finish in Neutral can be used to lighten any standard DuraSeal wood tone.
  2. Apply the first coat of DuraSeal Quick Coat Penetrating Finish liberally with a brush, lamb wool applicator or cloth at a coverage rate of approximately 500 square feet per gallon.
  3. Allow to penetrate for 5-8 minutes then remove any excess by wiping with rags or by buffing with #2 steel wool. Removal of all excess material is essential to ensure proper dry time and adhesion of the finish coat. 
  4. If desired, apply a thin second coat at a coverage rate of approximately 800 square feet per gallon. Allow to penetrate and remove excess material in the same manner as the first coat [step 3 above].
  5. Allow the final coat to dry at least 2 hours and apply a DuraSeal finish coat of your choice. 

Maintenance:

  • Regularly remove dust  and dirt by sweeping or vacuuming. Periodic buffing will renew luster. Exceptionally worn areas may require an additional finish coat. Maintained floors sealed only with DuraSeal Quick Coat Penetrating Finish with DuraSeal Renovator Cleaner and Reconditioner.
Materials Check-list:

To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Listed below are a few recommended tools.

(MSDS)

(PDS)

(California Prop 65 Labeling Requirements)

Click the link below to see a short video of this product in use and for some ideas for how to get the best results. 

DuraSeal Quick Coat Stain - Coffee Brown Gallon

Manufacturer: DuraSeal
Product ID: 811230000
Price: $46.15
QTY Add to cart
DuraSeal Quick Coat Penetrating Finish
Coffee Brown Gallon
 
DuraSeal Quick Coat Penetrating Finish is a semi-transparent stain. This product is formulated to seal, color and provide exceptional durability when used on bare wood or masonry surfaces. This rich blend of oil and resin gives hardwood floors a soft, satiny sheen. Its unique formulation provides a surface that can be topcoated in two hours. DuraSeal Quick Coat Penetrating Finish is available in existing DuraSeal colors as well as many Certified Minwax colors. It can be used with or without a finish coat, and is compatible with all DuraSeal  water-borne and oil-modified finish system.
Materials Check-list:
  • To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Please click the "Materials" tab  to locate the materials check-list for a list of the recommended  tools.

Color:

  • DuraSeal Quick Coat Penetrating Finish gives hardwood floors a soft, satiny sheen. 

Coverage:

  • DuraSeal Quick Coat Penetrating Finish covers approximately 500 square feet per gallon. While a second coat is optional, this product will cover approximately 800 square feet per gallon. 

Dry Time and Cure:

  • DuraSeal Quick Coat Penetrating Finish dries in approximately 2-3 hours. Note: Dry time is based on conditions of 77 F and 50% relative humidity. 

Clean-up:

  • Clean equipment using paint thinner or mineral spirits.

Storage:

  • Always store at room temperature. If stored at high temperature, cool to room temperature before use. Keep from freezing. 

Application Hints:

  • Read the "HOW TO" tab of this listing for application hints.

Surface Preparation:

  1. Properly prepare surface according to NWFA approved methods. Use a No. 100 grit screen for the final screening cut. 
  2. Remove all dust  with a broom and/or vacuum and tack the surface with a clean cloth moistened with mineral spirits. 

Application:

  1. Stir or shake material thoroughly before and occasionally during use. Apply a test sample on  a small inconspicuous area before proceeding with the entire job. If desired DuraSeal Quick Coat Penetrating Finish in Neutral can be used to lighten any standard DuraSeal wood tone.
  2. Apply the first coat of DuraSeal Quick Coat Penetrating Finish liberally with a brush, lamb wool applicator or cloth at a coverage rate of approximately 500 square feet per gallon.
  3. Allow to penetrate for 5-8 minutes then remove any excess by wiping with rags or by buffing with #2 steel wool. Removal of all excess material is essential to ensure proper dry time and adhesion of the finish coat. 
  4. If desired, apply a thin second coat at a coverage rate of approximately 800 square feet per gallon. Allow to penetrate and remove excess material in the same manner as the first coat [step 3 above].
  5. Allow the final coat to dry at least 2 hours and apply a DuraSeal finish coat of your choice. 

Maintenance:

  • Regularly remove dust  and dirt by sweeping or vacuuming. Periodic buffing will renew luster. Exceptionally worn areas may require an additional finish coat. Maintained floors sealed only with DuraSeal Quick Coat Penetrating Finish with DuraSeal Renovator Cleaner and Reconditioner.
Materials Check-list:

To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Listed below are a few recommended tools.

(MSDS)

(PDS)

(California Prop 65 Labeling Requirements)

Click the link below to see a short video of this product in use and for some ideas for how to get the best results. 

DuraSeal Quick Coat Stain - Colonial Maple Gallon

Manufacturer: DuraSeal
Product ID: 811400000
Price: $46.15
QTY Add to cart
DuraSeal Quick Coat Penetrating Finish
Colonial Maple Gallon
 
DuraSeal Quick Coat Penetrating Finish is a semi-transparent stain. This product is formulated to seal, color and provide exceptional durability when used on bare wood or masonry surfaces. This rich blend of oil and resin gives hardwood floors a soft, satiny sheen. Its unique formulation provides a surface that can be topcoated in two hours. DuraSeal Quick Coat Penetrating Finish is available in existing DuraSeal colors as well as many Certified Minwax colors. It can be used with or without a finish coat, and is compatible with all DuraSeal  water-borne and oil-modified finish system.
Materials Check-list:
  • To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Please click the "Materials" tab  to locate the materials check-list for a list of the recommended  tools.

Color:

  • DuraSeal Quick Coat Penetrating Finish gives hardwood floors a soft, satiny sheen. 

Coverage:

  • DuraSeal Quick Coat Penetrating Finish covers approximately 500 square feet per gallon. While a second coat is optional, this product will cover approximately 800 square feet per gallon. 

Dry Time and Cure:

  • DuraSeal Quick Coat Penetrating Finish dries in approximately 2-3 hours. Note: Dry time is based on conditions of 77 F and 50% relative humidity. 

Clean-up:

  • Clean equipment using paint thinner or mineral spirits.

Storage:

  • Always store at room temperature. If stored at high temperature, cool to room temperature before use. Keep from freezing. 

Application Hints:

  • Read the "HOW TO" tab of this listing for application hints.

Surface Preparation:

  1. Properly prepare surface according to NWFA approved methods. Use a No. 100 grit screen for the final screening cut. 
  2. Remove all dust  with a broom and/or vacuum and tack the surface with a clean cloth moistened with mineral spirits. 

Application:

  1. Stir or shake material thoroughly before and occasionally during use. Apply a test sample on  a small inconspicuous area before proceeding with the entire job. If desired DuraSeal Quick Coat Penetrating Finish in Neutral can be used to lighten any standard DuraSeal wood tone.
  2. Apply the first coat of DuraSeal Quick Coat Penetrating Finish liberally with a brush, lamb wool applicator or cloth at a coverage rate of approximately 500 square feet per gallon.
  3. Allow to penetrate for 5-8 minutes then remove any excess by wiping with rags or by buffing with #2 steel wool. Removal of all excess material is essential to ensure proper dry time and adhesion of the finish coat. 
  4. If desired, apply a thin second coat at a coverage rate of approximately 800 square feet per gallon. Allow to penetrate and remove excess material in the same manner as the first coat [step 3 above].
  5. Allow the final coat to dry at least 2 hours and apply a DuraSeal finish coat of your choice. 

Maintenance:

  • Regularly remove dust  and dirt by sweeping or vacuuming. Periodic buffing will renew luster. Exceptionally worn areas may require an additional finish coat. Maintained floors sealed only with DuraSeal Quick Coat Penetrating Finish with DuraSeal Renovator Cleaner and Reconditioner.
Materials Check-list:

To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Listed below are a few recommended tools.

(MSDS)

(PDS)

(California Prop 65 Labeling Requirements)

Click the link below to see a short video of this product in use and for some ideas for how to get the best results. 

DuraSeal Quick Coat Stain - Country White Gallon

Manufacturer: DuraSeal
Product ID: 811010000
Price: $46.15
QTY Add to cart
DuraSeal Quick Coat Penetrating Finish
County White Gallon
 
DuraSeal Quick Coat Penetrating Finish is a semi-transparent stain. This product is formulated to seal, color and provide exceptional durability when used on bare wood or masonry surfaces. This rich blend of oil and resin gives hardwood floors a soft, satiny sheen. Its unique formulation provides a surface that can be topcoated in two hours. DuraSeal Quick Coat Penetrating Finish is available in existing DuraSeal colors as well as many Certified Minwax colors. It can be used with or without a finish coat, and is compatible with all DuraSeal  water-borne and oil-modified finish system.


Materials Check-list:
  • To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Please click the "Materials" tab  to locate the materials check-list for a list of the recommended  tools.

Color:

  • DuraSeal Quick Coat Penetrating Finish gives hardwood floors a soft, satiny sheen. 

Coverage:

  • DuraSeal Quick Coat Penetrating Finish covers approximately 500 square feet per gallon. While a second coat is optional, this product will cover approximately 800 square feet per gallon. 

Dry Time and Cure:

  • DuraSeal Quick Coat Penetrating Finish dries in approximately 2-3 hours. Note: Dry time is based on conditions of 77 F and 50% relative humidity. 

Clean-up:

  • Clean equipment using paint thinner or mineral spirits.

Storage:

  • Always store at room temperature. If stored at high temperature, cool to room temperature before use. Keep from freezing. 

Application Hints:

  • Read the "HOW TO" tab of this listing for application hints.

Surface Preparation:

  1. Properly prepare surface according to NWFA approved methods. Use a No. 100 grit screen for the final screening cut. 
  2. Remove all dust  with a broom and/or vacuum and tack the surface with a clean cloth moistened with mineral spirits. 

Application:

  1. Stir or shake material thoroughly before and occasionally during use. Apply a test sample on  a small inconspicuous area before proceeding with the entire job. If desired DuraSeal Quick Coat Penetrating Finish in Neutral can be used to lighten any standard DuraSeal wood tone.
  2. Apply the first coat of DuraSeal Quick Coat Penetrating Finish liberally with a brush, lamb wool applicator or cloth at a coverage rate of approximately 500 square feet per gallon.
  3. Allow to penetrate for 5-8 minutes then remove any excess by wiping with rags or by buffing with #2 steel wool. Removal of all excess material is essential to ensure proper dry time and adhesion of the finish coat. 
  4. If desired, apply a thin second coat at a coverage rate of approximately 800 square feet per gallon. Allow to penetrate and remove excess material in the same manner as the first coat [step 3 above].
  5. Allow the final coat to dry at least 2 hours and apply a DuraSeal finish coat of your choice. 

Maintenance:

  • Regularly remove dust  and dirt by sweeping or vacuuming. Periodic buffing will renew luster. Exceptionally worn areas may require an additional finish coat. Maintained floors sealed only with DuraSeal Quick Coat Penetrating Finish with DuraSeal Renovator Cleaner and Reconditioner.
Materials Check-list:

To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Listed below are a few recommended tools.

(MSDS)

(PDS)

(California Prop 65 Labeling Requirements)

Click the link below to see a short video of this product in use and for some ideas for how to get the best results. 

DuraSeal Quick Coat Stain - Dark Walnut Gallon

Manufacturer: DuraSeal
Product ID: 811710000
Price: $46.15
QTY Add to cart
DuraSeal Quick Coat Penetrating Finish
Dark Walnut Gallon
 
DuraSeal Quick Coat Penetrating Finish is a semi-transparent stain. This product is formulated to seal, color and provide exceptional durability when used on bare wood or masonry surfaces. This rich blend of oil and resin gives hardwood floors a soft, satiny sheen. Its unique formulation provides a surface that can be topcoated in two hours. DuraSeal Quick Coat Penetrating Finish is available in existing DuraSeal colors as well as many Certified Minwax colors. It can be used with or without a finish coat, and is compatible with all DuraSeal  water-borne and oil-modified finish system.
Materials Check-list:
  • To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Please click the "Materials" tab  to locate the materials check-list for a list of the recommended  tools.

Color:

  • DuraSeal Quick Coat Penetrating Finish gives hardwood floors a soft, satiny sheen. 

Coverage:

  • DuraSeal Quick Coat Penetrating Finish covers approximately 500 square feet per gallon. While a second coat is optional, this product will cover approximately 800 square feet per gallon. 

Dry Time and Cure:

  • DuraSeal Quick Coat Penetrating Finish dries in approximately 2-3 hours. Note: Dry time is based on conditions of 77 F and 50% relative humidity. 

Clean-up:

  • Clean equipment using paint thinner or mineral spirits.

Storage:

  • Always store at room temperature. If stored at high temperature, cool to room temperature before use. Keep from freezing. 

Application Hints:

  • Read the "HOW TO" tab of this listing for application hints.

Surface Preparation:

  1. Properly prepare surface according to NWFA approved methods. Use a No. 100 grit screen for the final screening cut. 
  2. Remove all dust  with a broom and/or vacuum and tack the surface with a clean cloth moistened with mineral spirits. 

Application:

  1. Stir or shake material thoroughly before and occasionally during use. Apply a test sample on  a small inconspicuous area before proceeding with the entire job. If desired DuraSeal Quick Coat Penetrating Finish in Neutral can be used to lighten any standard DuraSeal wood tone.
  2. Apply the first coat of DuraSeal Quick Coat Penetrating Finish liberally with a brush, lamb wool applicator or cloth at a coverage rate of approximately 500 square feet per gallon.
  3. Allow to penetrate for 5-8 minutes then remove any excess by wiping with rags or by buffing with #2 steel wool. Removal of all excess material is essential to ensure proper dry time and adhesion of the finish coat. 
  4. If desired, apply a thin second coat at a coverage rate of approximately 800 square feet per gallon. Allow to penetrate and remove excess material in the same manner as the first coat [step 3 above].
  5. Allow the final coat to dry at least 2 hours and apply a DuraSeal finish coat of your choice. 

Maintenance:

  • Regularly remove dust  and dirt by sweeping or vacuuming. Periodic buffing will renew luster. Exceptionally worn areas may require an additional finish coat. Maintained floors sealed only with DuraSeal Quick Coat Penetrating Finish with DuraSeal Renovator Cleaner and Reconditioner.
Materials Check-list:

To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Listed below are a few recommended tools.

Materials Check-list:

To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Listed below are a few recommended tools.

Click the link below to see a short video of this product in use and for some ideas for how to get the best results. 

DuraSeal Quick Coat Stain - Early American Gallon

Manufacturer: DuraSeal
Product ID: 811300000
Price: $46.15
QTY Add to cart
DuraSeal Quick Coat Penetrating Finish
Early American Gallon
 
DuraSeal Quick Coat Penetrating Finish is a semi-transparent stain. This product is formulated to seal, color and provide exceptional durability when used on bare wood or masonry surfaces. This rich blend of oil and resin gives hardwood floors a soft, satiny sheen. Its unique formulation provides a surface that can be topcoated in two hours. DuraSeal Quick Coat Penetrating Finish is available in existing DuraSeal colors as well as many Certified Minwax colors. It can be used with or without a finish coat, and is compatible with all DuraSeal  water-borne and oil-modified finish system.
Materials Check-list:
  • To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Please click the "Materials" tab  to locate the materials check-list for a list of the recommended  tools.

Color:

  • DuraSeal Quick Coat Penetrating Finish gives hardwood floors a soft, satiny sheen. 

Coverage:

  • DuraSeal Quick Coat Penetrating Finish covers approximately 500 square feet per gallon. While a second coat is optional, this product will cover approximately 800 square feet per gallon. 

Dry Time and Cure:

  • DuraSeal Quick Coat Penetrating Finish dries in approximately 2-3 hours. Note: Dry time is based on conditions of 77 F and 50% relative humidity. 

Clean-up:

  • Clean equipment using paint thinner or mineral spirits.

Storage:

  • Always store at room temperature. If stored at high temperature, cool to room temperature before use. Keep from freezing. 

Application Hints:

  • Read the "HOW TO" tab of this listing for application hints.

Surface Preparation:

  1. Properly prepare surface according to NWFA approved methods. Use a No. 100 grit screen for the final screening cut. 
  2. Remove all dust  with a broom and/or vacuum and tack the surface with a clean cloth moistened with mineral spirits. 

Application:

  1. Stir or shake material thoroughly before and occasionally during use. Apply a test sample on  a small inconspicuous area before proceeding with the entire job. If desired DuraSeal Quick Coat Penetrating Finish in Neutral can be used to lighten any standard DuraSeal wood tone.
  2. Apply the first coat of DuraSeal Quick Coat Penetrating Finish liberally with a brush, lamb wool applicator or cloth at a coverage rate of approximately 500 square feet per gallon.
  3. Allow to penetrate for 5-8 minutes then remove any excess by wiping with rags or by buffing with #2 steel wool. Removal of all excess material is essential to ensure proper dry time and adhesion of the finish coat. 
  4. If desired, apply a thin second coat at a coverage rate of approximately 800 square feet per gallon. Allow to penetrate and remove excess material in the same manner as the first coat [step 3 above].
  5. Allow the final coat to dry at least 2 hours and apply a DuraSeal finish coat of your choice. 

Maintenance:

  • Regularly remove dust  and dirt by sweeping or vacuuming. Periodic buffing will renew luster. Exceptionally worn areas may require an additional finish coat. Maintained floors sealed only with DuraSeal Quick Coat Penetrating Finish with DuraSeal Renovator Cleaner and Reconditioner.
Materials Check-list:

To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Listed below are a few recommended tools.

(MSDS)

(PDS)

(California Prop 65 Labeling Requirements)

Click the link below to see a short video of this product in use and for some ideas for how to get the best results. 

DuraSeal Quick Coat Stain - Ebony Gallon

Manufacturer: Sherwin-Williams
Product ID: 811310000
Price: $46.15
QTY Add to cart
DuraSeal Quick Coat Penetrating Finish
Ebony Gallon
 
DuraSeal Quick Coat Penetrating Finish is a semi-transparent stain. This product is formulated to seal, color and provide exceptional durability when used on bare wood or masonry surfaces. This rich blend of oil and resin gives hardwood floors a soft, satiny sheen. Its unique formulation provides a surface that can be topcoated in two hours. DuraSeal Quick Coat Penetrating Finish is available in existing DuraSeal colors as well as many Certified Minwax colors. It can be used with or without a finish coat, and is compatible with all DuraSeal  water-borne and oil-modified finish system.
Materials Check-list:
  • To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Please click the "Materials" tab  to locate the materials check-list for a list of the recommended  tools.

Color:

  • DuraSeal Quick Coat Penetrating Finish gives hardwood floors a soft, satiny sheen. 

Coverage:

  • DuraSeal Quick Coat Penetrating Finish covers approximately 500 square feet per gallon. While a second coat is optional, this product will cover approximately 800 square feet per gallon. 

Dry Time and Cure:

  • DuraSeal Quick Coat Penetrating Finish dries in approximately 2-3 hours. Note: Dry time is based on conditions of 77 F and 50% relative humidity. 

Clean-up:

  • Clean equipment using paint thinner or mineral spirits.

Storage:

  • Always store at room temperature. If stored at high temperature, cool to room temperature before use. Keep from freezing. 

Application Hints:

  • Read the "HOW TO" tab of this listing for application hints.

Surface Preparation:

  1. Properly prepare surface according to NWFA approved methods. Use a No. 100 grit screen for the final screening cut. 
  2. Remove all dust  with a broom and/or vacuum and tack the surface with a clean cloth moistened with mineral spirits. 

Application:

  1. Stir or shake material thoroughly before and occasionally during use. Apply a test sample on  a small inconspicuous area before proceeding with the entire job. If desired DuraSeal Quick Coat Penetrating Finish in Neutral can be used to lighten any standard DuraSeal wood tone.
  2. Apply the first coat of DuraSeal Quick Coat Penetrating Finish liberally with a brush, lamb wool applicator or cloth at a coverage rate of approximately 500 square feet per gallon.
  3. Allow to penetrate for 5-8 minutes then remove any excess by wiping with rags or by buffing with #2 steel wool. Removal of all excess material is essential to ensure proper dry time and adhesion of the finish coat. 
  4. If desired, apply a thin second coat at a coverage rate of approximately 800 square feet per gallon. Allow to penetrate and remove excess material in the same manner as the first coat [step 3 above].
  5. Allow the final coat to dry at least 2 hours and apply a DuraSeal finish coat of your choice. 

Maintenance:

  • Regularly remove dust  and dirt by sweeping or vacuuming. Periodic buffing will renew luster. Exceptionally worn areas may require an additional finish coat. Maintained floors sealed only with DuraSeal Quick Coat Penetrating Finish with DuraSeal Renovator Cleaner and Reconditioner.
Materials Check-list:

To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Listed below are a few recommended tools.

(MSDS)

(PDS)

(California Prop 65 Labeling Requirements)

Click the link below to see a short video of this product in use and for some ideas for how to get the best results. 

DuraSeal Quick Coat Stain - English Chestnut Gallon

Manufacturer: DuraSeal
Product ID: 811330000
Price: $46.15
QTY Add to cart
DuraSeal Quick Coat Penetrating Finish
English Chestnut Gallon
 
DuraSeal Quick Coat Penetrating Finish is a semi-transparent stain. This product is formulated to seal, color and provide exceptional durability when used on bare wood or masonry surfaces. This rich blend of oil and resin gives hardwood floors a soft, satiny sheen. Its unique formulation provides a surface that can be topcoated in two hours. DuraSeal Quick Coat Penetrating Finish is available in existing DuraSeal colors as well as many Certified Minwax colors. It can be used with or without a finish coat, and is compatible with all DuraSeal  water-borne and oil-modified finish system.
Materials Check-list:
  • To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Please click the "Materials" tab  to locate the materials check-list for a list of the recommended  tools.

Color:

  • DuraSeal Quick Coat Penetrating Finish gives hardwood floors a soft, satiny sheen. 

Coverage:

  • DuraSeal Quick Coat Penetrating Finish covers approximately 500 square feet per gallon. While a second coat is optional, this product will cover approximately 800 square feet per gallon. 

Dry Time and Cure:

  • DuraSeal Quick Coat Penetrating Finish dries in approximately 2-3 hours. Note: Dry time is based on conditions of 77 F and 50% relative humidity. 

Clean-up:

  • Clean equipment using paint thinner or mineral spirits.

Storage:

  • Always store at room temperature. If stored at high temperature, cool to room temperature before use. Keep from freezing. 

Application Hints:

  • Read the "HOW TO" tab of this listing for application hints.

Surface Preparation:

  1. Properly prepare surface according to NWFA approved methods. Use a No. 100 grit screen for the final screening cut. 
  2. Remove all dust  with a broom and/or vacuum and tack the surface with a clean cloth moistened with mineral spirits. 

Application:

  1. Stir or shake material thoroughly before and occasionally during use. Apply a test sample on  a small inconspicuous area before proceeding with the entire job. If desired DuraSeal Quick Coat Penetrating Finish in Neutral can be used to lighten any standard DuraSeal wood tone.
  2. Apply the first coat of DuraSeal Quick Coat Penetrating Finish liberally with a brush, lamb wool applicator or cloth at a coverage rate of approximately 500 square feet per gallon.
  3. Allow to penetrate for 5-8 minutes then remove any excess by wiping with rags or by buffing with #2 steel wool. Removal of all excess material is essential to ensure proper dry time and adhesion of the finish coat. 
  4. If desired, apply a thin second coat at a coverage rate of approximately 800 square feet per gallon. Allow to penetrate and remove excess material in the same manner as the first coat [step 3 above].
  5. Allow the final coat to dry at least 2 hours and apply a DuraSeal finish coat of your choice. 

Maintenance:

  • Regularly remove dust  and dirt by sweeping or vacuuming. Periodic buffing will renew luster. Exceptionally worn areas may require an additional finish coat. Maintained floors sealed only with DuraSeal Quick Coat Penetrating Finish with DuraSeal Renovator Cleaner and Reconditioner.
Materials Check-list:

To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Listed below are a few recommended tools.

(MSDS)

(PDS)

(California Prop 65 Labeling Requirements)

Click the link below to see a short video of this product in use and for some ideas for how to get the best results. 

DuraSeal Quick Coat Stain - Espresso Gallon

Manufacturer: Sherwin-Williams
Product ID: 811730000
Price: $46.15
QTY Add to cart
DuraSeal Quick Coat Penetrating Finish
Espresso Gallon
 
DuraSeal Quick Coat Penetrating Finish is a semi-transparent stain. This product is formulated to seal, color and provide exceptional durability when used on bare wood or masonry surfaces. This rich blend of oil and resin gives hardwood floors a soft, satiny sheen. Its unique formulation provides a surface that can be topcoated in two hours. DuraSeal Quick Coat Penetrating Finish is available in existing DuraSeal colors as well as many Certified Minwax colors. It can be used with or without a finish coat, and is compatible with all DuraSeal  water-borne and oil-modified finish system.
Materials Check-list:
    • To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Please click the "Materials" tab  to locate the materials check-list for a list of the recommended  tools.

    Color:

    • DuraSeal Quick Coat Penetrating Finish gives hardwood floors a soft, satiny sheen. 

    Coverage:

    • DuraSeal Quick Coat Penetrating Finish covers approximately 500 square feet per gallon. While a second coat is optional, this product will cover approximately 800 square feet per gallon. 

    Dry Time and Cure:

    • DuraSeal Quick Coat Penetrating Finish dries in approximately 2-3 hours. Note: Dry time is based on conditions of 77 F and 50% relative humidity. 

    Clean-up:

    • Clean equipment using paint thinner or mineral spirits.

    Storage:

    • Always store at room temperature. If stored at high temperature, cool to room temperature before use. Keep from freezing. 

    Application Hints:

    • Read the "HOW TO" tab of this listing for application hints.

Surface Preparation:

  1. Properly prepare surface according to NWFA approved methods. Use a No. 100 grit screen for the final screening cut. 
  2. Remove all dust  with a broom and/or vacuum and tack the surface with a clean cloth moistened with mineral spirits. 

Application:

  1. Stir or shake material thoroughly before and occasionally during use. Apply a test sample on  a small inconspicuous area before proceeding with the entire job. If desired DuraSeal Quick Coat Penetrating Finish in Neutral can be used to lighten any standard DuraSeal wood tone.
  2. Apply the first coat of DuraSeal Quick Coat Penetrating Finish liberally with a brush, lamb wool applicator or cloth at a coverage rate of approximately 500 square feet per gallon.
  3. Allow to penetrate for 5-8 minutes then remove any excess by wiping with rags or by buffing with #2 steel wool. Removal of all excess material is essential to ensure proper dry time and adhesion of the finish coat. 
  4. If desired, apply a thin second coat at a coverage rate of approximately 800 square feet per gallon. Allow to penetrate and remove excess material in the same manner as the first coat [step 3 above].
  5. Allow the final coat to dry at least 2 hours and apply a DuraSeal finish coat of your choice. 

Maintenance:

  • Regularly remove dust  and dirt by sweeping or vacuuming. Periodic buffing will renew luster. Exceptionally worn areas may require an additional finish coat. Maintained floors sealed only with DuraSeal Quick Coat Penetrating Finish with DuraSeal Renovator Cleaner and Reconditioner.
Materials Check-list:

To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Listed below are a few recommended tools.

(MSDS)

(PDS)

(California Prop 65 Labeling Requirements)

Click the link below to see a short video of this product in use and for some ideas for how to get the best results. 

DuraSeal Quick Coat Stain - Fruitwood Gallon

Manufacturer: DuraSeal
Product ID: 811410000
Price: $46.15
QTY Add to cart
DuraSeal Quick Coat Penetrating Finish
Fruitwood Gallon
 
DuraSeal Quick Coat Penetrating Finish is a semi-transparent stain. This product is formulated to seal, color and provide exceptional durability when used on bare wood or masonry surfaces. This rich blend of oil and resin gives hardwood floors a soft, satiny sheen. Its unique formulation provides a surface that can be topcoated in two hours. DuraSeal Quick Coat Penetrating Finish is available in existing DuraSeal colors as well as many Certified Minwax colors. It can be used with or without a finish coat, and is compatible with all DuraSeal  water-borne and oil-modified finish system.
Materials Check-list:
  • To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Please click the "Materials" tab  to locate the materials check-list for a list of the recommended  tools.

Color:

  • DuraSeal Quick Coat Penetrating Finish gives hardwood floors a soft, satiny sheen. 

Coverage:

  • DuraSeal Quick Coat Penetrating Finish covers approximately 500 square feet per gallon. While a second coat is optional, this product will cover approximately 800 square feet per gallon. 

Dry Time and Cure:

  • DuraSeal Quick Coat Penetrating Finish dries in approximately 2-3 hours. Note: Dry time is based on conditions of 77 F and 50% relative humidity. 

Clean-up:

  • Clean equipment using paint thinner or mineral spirits.

Storage:

  • Always store at room temperature. If stored at high temperature, cool to room temperature before use. Keep from freezing. 

Application Hints:

  • Read the "HOW TO" tab of this listing for application hints.

Surface Preparation:

  1. Properly prepare surface according to NWFA approved methods. Use a No. 100 grit screen for the final screening cut. 
  2. Remove all dust  with a broom and/or vacuum and tack the surface with a clean cloth moistened with mineral spirits. 

Application:

  1. Stir or shake material thoroughly before and occasionally during use. Apply a test sample on  a small inconspicuous area before proceeding with the entire job. If desired DuraSeal Quick Coat Penetrating Finish in Neutral can be used to lighten any standard DuraSeal wood tone.
  2. Apply the first coat of DuraSeal Quick Coat Penetrating Finish liberally with a brush, lamb wool applicator or cloth at a coverage rate of approximately 500 square feet per gallon.
  3. Allow to penetrate for 5-8 minutes then remove any excess by wiping with rags or by buffing with #2 steel wool. Removal of all excess material is essential to ensure proper dry time and adhesion of the finish coat. 
  4. If desired, apply a thin second coat at a coverage rate of approximately 800 square feet per gallon. Allow to penetrate and remove excess material in the same manner as the first coat [step 3 above].
  5. Allow the final coat to dry at least 2 hours and apply a DuraSeal finish coat of your choice. 

Maintenance:

  • Regularly remove dust  and dirt by sweeping or vacuuming. Periodic buffing will renew luster. Exceptionally worn areas may require an additional finish coat. Maintained floors sealed only with DuraSeal Quick Coat Penetrating Finish with DuraSeal Renovator Cleaner and Reconditioner.
Materials Check-list:

To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Listed below are a few recommended tools.

(MSDS)

(PDS)

(California Prop 65 Labeling Requirements)

Click the link below to see a short video of this product in use and for some ideas for how to get the best results. 

DuraSeal Quick Coat Stain - Golden Brown Gallon

Manufacturer: DuraSeal
Product ID: 811210000
Price: $46.15
QTY Add to cart
DuraSeal Quick Coat Penetrating Finish
Golden Brown Gallon
 
DuraSeal Quick Coat Penetrating Finish is a semi-transparent stain. This product is formulated to seal, color and provide exceptional durability when used on bare wood or masonry surfaces. This rich blend of oil and resin gives hardwood floors a soft, satiny sheen. Its unique formulation provides a surface that can be topcoated in two hours. DuraSeal Quick Coat Penetrating Finish is available in existing DuraSeal colors as well as many Certified Minwax colors. It can be used with or without a finish coat, and is compatible with all DuraSeal  water-borne and oil-modified finish system.
Materials Check-list:
  • To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Please click the "Materials" tab  to locate the materials check-list for a list of the recommended  tools.

Color:

  • DuraSeal Quick Coat Penetrating Finish gives hardwood floors a soft, satiny sheen. 

Coverage:

  • DuraSeal Quick Coat Penetrating Finish covers approximately 500 square feet per gallon. While a second coat is optional, this product will cover approximately 800 square feet per gallon. 

Dry Time and Cure:

  • DuraSeal Quick Coat Penetrating Finish dries in approximately 2-3 hours. Note: Dry time is based on conditions of 77 F and 50% relative humidity. 

Clean-up:

  • Clean equipment using paint thinner or mineral spirits.

Storage:

  • Always store at room temperature. If stored at high temperature, cool to room temperature before use. Keep from freezing. 

Application Hints:

  • Read the "HOW TO" tab of this listing for application hints.

Surface Preparation:

  1. Properly prepare surface according to NWFA approved methods. Use a No. 100 grit screen for the final screening cut. 
  2. Remove all dust  with a broom and/or vacuum and tack the surface with a clean cloth moistened with mineral spirits. 

Application:

  1. Stir or shake material thoroughly before and occasionally during use. Apply a test sample on  a small inconspicuous area before proceeding with the entire job. If desired DuraSeal Quick Coat Penetrating Finish in Neutral can be used to lighten any standard DuraSeal wood tone.
  2. Apply the first coat of DuraSeal Quick Coat Penetrating Finish liberally with a brush, lamb wool applicator or cloth at a coverage rate of approximately 500 square feet per gallon.
  3. Allow to penetrate for 5-8 minutes then remove any excess by wiping with rags or by buffing with #2 steel wool. Removal of all excess material is essential to ensure proper dry time and adhesion of the finish coat. 
  4. If desired, apply a thin second coat at a coverage rate of approximately 800 square feet per gallon. Allow to penetrate and remove excess material in the same manner as the first coat [step 3 above].
  5. Allow the final coat to dry at least 2 hours and apply a DuraSeal finish coat of your choice. 

Maintenance:

  • Regularly remove dust  and dirt by sweeping or vacuuming. Periodic buffing will renew luster. Exceptionally worn areas may require an additional finish coat. Maintained floors sealed only with DuraSeal Quick Coat Penetrating Finish with DuraSeal Renovator Cleaner and Reconditioner.
Materials Check-list:

To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Listed below are a few recommended tools.

(MSDS)

(PDS)

(California Prop 65 Labeling Requirements)

Click the link below to see a short video of this product in use and for some ideas for how to get the best results. 

DuraSeal Quick Coat Stain - Golden Oak Gallon

Manufacturer: DuraSeal
Product ID: 811120000
Price: $46.15
QTY Add to cart
DuraSeal Quick Coat Penetrating Finish
Golden Oak Gallon
 
DuraSeal Quick Coat Penetrating Finish is a semi-transparent stain. This product is formulated to seal, color and provide exceptional durability when used on bare wood or masonry surfaces. This rich blend of oil and resin gives hardwood floors a soft, satiny sheen. Its unique formulation provides a surface that can be topcoated in two hours. DuraSeal Quick Coat Penetrating Finish is available in existing DuraSeal colors as well as many Certified Minwax colors. It can be used with or without a finish coat, and is compatible with all DuraSeal  water-borne and oil-modified finish system.


Materials Check-list:
  • To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Please click the "Materials" tab  to locate the materials check-list for a list of the recommended  tools.

Color:

  • DuraSeal Quick Coat Penetrating Finish gives hardwood floors a soft, satiny sheen. 

Coverage:

  • DuraSeal Quick Coat Penetrating Finish covers approximately 500 square feet per gallon. While a second coat is optional, this product will cover approximately 800 square feet per gallon. 

Dry Time and Cure:

  • DuraSeal Quick Coat Penetrating Finish dries in approximately 2-3 hours. Note: Dry time is based on conditions of 77 F and 50% relative humidity. 

Clean-up:

  • Clean equipment using paint thinner or mineral spirits.

Storage:

  • Always store at room temperature. If stored at high temperature, cool to room temperature before use. Keep from freezing. 

Application Hints:

  • Read the "HOW TO" tab of this listing for application hints.

Surface Preparation:

  1. Properly prepare surface according to NWFA approved methods. Use a No. 100 grit screen for the final screening cut. 
  2. Remove all dust  with a broom and/or vacuum and tack the surface with a clean cloth moistened with mineral spirits. 

Application:

  1. Stir or shake material thoroughly before and occasionally during use. Apply a test sample on  a small inconspicuous area before proceeding with the entire job. If desired DuraSeal Quick Coat Penetrating Finish in Neutral can be used to lighten any standard DuraSeal wood tone.
  2. Apply the first coat of DuraSeal Quick Coat Penetrating Finish liberally with a brush, lamb wool applicator or cloth at a coverage rate of approximately 500 square feet per gallon.
  3. Allow to penetrate for 5-8 minutes then remove any excess by wiping with rags or by buffing with #2 steel wool. Removal of all excess material is essential to ensure proper dry time and adhesion of the finish coat. 
  4. If desired, apply a thin second coat at a coverage rate of approximately 800 square feet per gallon. Allow to penetrate and remove excess material in the same manner as the first coat [step 3 above].
  5. Allow the final coat to dry at least 2 hours and apply a DuraSeal finish coat of your choice. 

Maintenance:

  • Regularly remove dust  and dirt by sweeping or vacuuming. Periodic buffing will renew luster. Exceptionally worn areas may require an additional finish coat. Maintained floors sealed only with DuraSeal Quick Coat Penetrating Finish with DuraSeal Renovator Cleaner and Reconditioner.
Materials Check-list:

To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Listed below are a few recommended tools.

(MSDS)

(PDS)

(California Prop 65 Labeling Requirements)

Click the link below to see a short video of this product in use and for some ideas for how to get the best results. 

DuraSeal Quick Coat Stain - Golden Pecan Gallon

Manufacturer: DuraSeal
Product ID: 811450000
Price: $46.15
QTY Add to cart
DuraSeal Quick Coat Penetrating Finish
Golden Pecan Gallon
 
DuraSeal Quick Coat Penetrating Finish is a semi-transparent stain. This product is formulated to seal, color and provide exceptional durability when used on bare wood or masonry surfaces. This rich blend of oil and resin gives hardwood floors a soft, satiny sheen. Its unique formulation provides a surface that can be topcoated in two hours. DuraSeal Quick Coat Penetrating Finish is available in existing DuraSeal colors as well as many Certified Minwax colors. It can be used with or without a finish coat, and is compatible with all DuraSeal  water-borne and oil-modified finish system.
Materials Check-list:
  • To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Please click the "Materials" tab  to locate the materials check-list for a list of the recommended  tools.

Color:

  • DuraSeal Quick Coat Penetrating Finish gives hardwood floors a soft, satiny sheen. 

Coverage:

  • DuraSeal Quick Coat Penetrating Finish covers approximately 500 square feet per gallon. While a second coat is optional, this product will cover approximately 800 square feet per gallon. 

Dry Time and Cure:

  • DuraSeal Quick Coat Penetrating Finish dries in approximately 2-3 hours. Note: Dry time is based on conditions of 77 F and 50% relative humidity. 

Clean-up:

  • Clean equipment using paint thinner or mineral spirits.

Storage:

  • Always store at room temperature. If stored at high temperature, cool to room temperature before use. Keep from freezing. 

Application Hints:

  • Read the "HOW TO" tab of this listing for application hints.

Surface Preparation:

  1. Properly prepare surface according to NWFA approved methods. Use a No. 100 grit screen for the final screening cut. 
  2. Remove all dust  with a broom and/or vacuum and tack the surface with a clean cloth moistened with mineral spirits. 

Application:

  1. Stir or shake material thoroughly before and occasionally during use. Apply a test sample on  a small inconspicuous area before proceeding with the entire job. If desired DuraSeal Quick Coat Penetrating Finish in Neutral can be used to lighten any standard DuraSeal wood tone.
  2. Apply the first coat of DuraSeal Quick Coat Penetrating Finish liberally with a brush, lamb wool applicator or cloth at a coverage rate of approximately 500 square feet per gallon.
  3. Allow to penetrate for 5-8 minutes then remove any excess by wiping with rags or by buffing with #2 steel wool. Removal of all excess material is essential to ensure proper dry time and adhesion of the finish coat. 
  4. If desired, apply a thin second coat at a coverage rate of approximately 800 square feet per gallon. Allow to penetrate and remove excess material in the same manner as the first coat [step 3 above].
  5. Allow the final coat to dry at least 2 hours and apply a DuraSeal finish coat of your choice. 

Maintenance:

  • Regularly remove dust  and dirt by sweeping or vacuuming. Periodic buffing will renew luster. Exceptionally worn areas may require an additional finish coat. Maintained floors sealed only with DuraSeal Quick Coat Penetrating Finish with DuraSeal Renovator Cleaner and Reconditioner.
Materials Check-list:

To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Listed below are a few recommended tools.

(MSDS)

(PDS)

(California Prop 65 Labeling Requirements)

Click the link below to see a short video of this product in use and for some ideas for how to get the best results. 

DuraSeal Quick Coat Stain - Gunstock Gallon

Manufacturer: DuraSeal
Product ID: 811500000
Price: $46.15
QTY Add to cart
DuraSeal Quick Coat Penetrating Finish
Gunstock Gallon
 
DuraSeal Quick Coat Penetrating Finish is a semi-transparent stain. This product is formulated to seal, color and provide exceptional durability when used on bare wood or masonry surfaces. This rich blend of oil and resin gives hardwood floors a soft, satiny sheen. Its unique formulation provides a surface that can be topcoated in two hours. DuraSeal Quick Coat Penetrating Finish is available in existing DuraSeal colors as well as many Certified Minwax colors. It can be used with or without a finish coat, and is compatible with all DuraSeal  water-borne and oil-modified finish system.


Materials Check-list:
  • To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Please click the "Materials" tab  to locate the materials check-list for a list of the recommended  tools.

Color:

  • DuraSeal Quick Coat Penetrating Finish gives hardwood floors a soft, satiny sheen. 

Coverage:

  • DuraSeal Quick Coat Penetrating Finish covers approximately 500 square feet per gallon. While a second coat is optional, this product will cover approximately 800 square feet per gallon. 

Dry Time and Cure:

  • DuraSeal Quick Coat Penetrating Finish dries in approximately 2-3 hours. Note: Dry time is based on conditions of 77 F and 50% relative humidity. 

Clean-up:

  • Clean equipment using paint thinner or mineral spirits.

Storage:

  • Always store at room temperature. If stored at high temperature, cool to room temperature before use. Keep from freezing. 

Application Hints:

  • Read the "HOW TO" tab of this listing for application hints.

Surface Preparation:

  1. Properly prepare surface according to NWFA approved methods. Use a No. 100 grit screen for the final screening cut. 
  2. Remove all dust  with a broom and/or vacuum and tack the surface with a clean cloth moistened with mineral spirits. 

Application:

  1. Stir or shake material thoroughly before and occasionally during use. Apply a test sample on  a small inconspicuous area before proceeding with the entire job. If desired DuraSeal Quick Coat Penetrating Finish in Neutral can be used to lighten any standard DuraSeal wood tone.
  2. Apply the first coat of DuraSeal Quick Coat Penetrating Finish liberally with a brush, lamb wool applicator or cloth at a coverage rate of approximately 500 square feet per gallon.
  3. Allow to penetrate for 5-8 minutes then remove any excess by wiping with rags or by buffing with #2 steel wool. Removal of all excess material is essential to ensure proper dry time and adhesion of the finish coat. 
  4. If desired, apply a thin second coat at a coverage rate of approximately 800 square feet per gallon. Allow to penetrate and remove excess material in the same manner as the first coat [step 3 above].
  5. Allow the final coat to dry at least 2 hours and apply a DuraSeal finish coat of your choice. 

Maintenance:

  • Regularly remove dust  and dirt by sweeping or vacuuming. Periodic buffing will renew luster. Exceptionally worn areas may require an additional finish coat. Maintained floors sealed only with DuraSeal Quick Coat Penetrating Finish with DuraSeal Renovator Cleaner and Reconditioner.
Materials Check-list:

To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Listed below are a few recommended tools.

(MSDS)

(PDS)

(California Prop 65 Labeling Requirements)

Click the link below to see a short video of this product in use and for some ideas for how to get the best results. 

DuraSeal Quick Coat Stain - Jacobean Gallon

Manufacturer: DuraSeal
Product ID: 811750000
Price: $46.15
QTY Add to cart
DuraSeal Quick Coat Penetrating Finish
Jacobean Gallon
 
DuraSeal Quick Coat Penetrating Finish is a semi-transparent stain. This product is formulated to seal, color and provide exceptional durability when used on bare wood or masonry surfaces. This rich blend of oil and resin gives hardwood floors a soft, satiny sheen. Its unique formulation provides a surface that can be topcoated in two hours. DuraSeal Quick Coat Penetrating Finish is available in existing DuraSeal colors as well as many Certified Minwax colors. It can be used with or without a finish coat, and is compatible with all DuraSeal  water-borne and oil-modified finish system.
Materials Check-list:
  • To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Please click the "Materials" tab  to locate the materials check-list for a list of the recommended  tools.

Color:

  • DuraSeal Quick Coat Penetrating Finish gives hardwood floors a soft, satiny sheen. 

Coverage:

  • DuraSeal Quick Coat Penetrating Finish covers approximately 500 square feet per gallon. While a second coat is optional, this product will cover approximately 800 square feet per gallon. 

Dry Time and Cure:

  • DuraSeal Quick Coat Penetrating Finish dries in approximately 2-3 hours. Note: Dry time is based on conditions of 77 F and 50% relative humidity. 

Clean-up:

  • Clean equipment using paint thinner or mineral spirits.

Storage:

  • Always store at room temperature. If stored at high temperature, cool to room temperature before use. Keep from freezing. 

Application Hints:

  • Read the "HOW TO" tab of this listing for application hints.

Surface Preparation:

  1. Properly prepare surface according to NWFA approved methods. Use a No. 100 grit screen for the final screening cut. 
  2. Remove all dust  with a broom and/or vacuum and tack the surface with a clean cloth moistened with mineral spirits. 

Application:

  1. Stir or shake material thoroughly before and occasionally during use. Apply a test sample on  a small inconspicuous area before proceeding with the entire job. If desired DuraSeal Quick Coat Penetrating Finish in Neutral can be used to lighten any standard DuraSeal wood tone.
  2. Apply the first coat of DuraSeal Quick Coat Penetrating Finish liberally with a brush, lamb wool applicator or cloth at a coverage rate of approximately 500 square feet per gallon.
  3. Allow to penetrate for 5-8 minutes then remove any excess by wiping with rags or by buffing with #2 steel wool. Removal of all excess material is essential to ensure proper dry time and adhesion of the finish coat. 
  4. If desired, apply a thin second coat at a coverage rate of approximately 800 square feet per gallon. Allow to penetrate and remove excess material in the same manner as the first coat [step 3 above].
  5. Allow the final coat to dry at least 2 hours and apply a DuraSeal finish coat of your choice. 

Maintenance:

  • Regularly remove dust  and dirt by sweeping or vacuuming. Periodic buffing will renew luster. Exceptionally worn areas may require an additional finish coat. Maintained floors sealed only with DuraSeal Quick Coat Penetrating Finish with DuraSeal Renovator Cleaner and Reconditioner.
Materials Check-list:

To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Listed below are a few recommended tools.

(MSDS)

(PDS)

(California Prop 65 Labeling Requirements)

Click the link below to see a short video of this product in use and for some ideas for how to get the best results. 

DuraSeal Quick Coat Stain - Medium Brown Gallon

Manufacturer: DuraSeal
Product ID: 811280000
Price: $46.15
QTY Add to cart
DuraSeal Quick Coat Penetrating Finish
Medium Brown Gallon
 
DuraSeal Quick Coat Penetrating Finish is a semi-transparent stain. This product is formulated to seal, color and provide exceptional durability when used on bare wood or masonry surfaces. This rich blend of oil and resin gives hardwood floors a soft, satiny sheen. Its unique formulation provides a surface that can be topcoated in two hours. DuraSeal Quick Coat Penetrating Finish is available in existing DuraSeal colors as well as many Certified Minwax colors. It can be used with or without a finish coat, and is compatible with all DuraSeal  water-borne and oil-modified finish system.
Materials Check-list:
  • To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Please click the "Materials" tab  to locate the materials check-list for a list of the recommended  tools.

Color:

  • DuraSeal Quick Coat Penetrating Finish gives hardwood floors a soft, satiny sheen. 

Coverage:

  • DuraSeal Quick Coat Penetrating Finish covers approximately 500 square feet per gallon. While a second coat is optional, this product will cover approximately 800 square feet per gallon. 

Dry Time and Cure:

  • DuraSeal Quick Coat Penetrating Finish dries in approximately 2-3 hours. Note: Dry time is based on conditions of 77 F and 50% relative humidity. 

Clean-up:

  • Clean equipment using paint thinner or mineral spirits.

Storage:

  • Always store at room temperature. If stored at high temperature, cool to room temperature before use. Keep from freezing. 

Application Hints:

  • Read the "HOW TO" tab of this listing for application hints.

Surface Preparation:

  1. Properly prepare surface according to NWFA approved methods. Use a No. 100 grit screen for the final screening cut. 
  2. Remove all dust  with a broom and/or vacuum and tack the surface with a clean cloth moistened with mineral spirits. 

Application:

  1. Stir or shake material thoroughly before and occasionally during use. Apply a test sample on  a small inconspicuous area before proceeding with the entire job. If desired DuraSeal Quick Coat Penetrating Finish in Neutral can be used to lighten any standard DuraSeal wood tone.
  2. Apply the first coat of DuraSeal Quick Coat Penetrating Finish liberally with a brush, lamb wool applicator or cloth at a coverage rate of approximately 500 square feet per gallon.
  3. Allow to penetrate for 5-8 minutes then remove any excess by wiping with rags or by buffing with #2 steel wool. Removal of all excess material is essential to ensure proper dry time and adhesion of the finish coat. 
  4. If desired, apply a thin second coat at a coverage rate of approximately 800 square feet per gallon. Allow to penetrate and remove excess material in the same manner as the first coat [step 3 above].
  5. Allow the final coat to dry at least 2 hours and apply a DuraSeal finish coat of your choice. 

Maintenance:

  • Regularly remove dust  and dirt by sweeping or vacuuming. Periodic buffing will renew luster. Exceptionally worn areas may require an additional finish coat. Maintained floors sealed only with DuraSeal Quick Coat Penetrating Finish with DuraSeal Renovator Cleaner and Reconditioner.
Materials Check-list:

To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Listed below are a few recommended tools.

(MSDS)

(PDS)

(California Prop 65 Labeling Requirements)

Click the link below to see a short video of this product in use and for some ideas for how to get the best results. 

DuraSeal Quick Coat Stain - Mesquite Red Gallon

Manufacturer: DuraSeal
Product ID: 811220000
Price: $46.15
QTY Add to cart
DuraSeal Quick Coat Penetrating Finish
Mesquite Red Gallon
 
DuraSeal Quick Coat Penetrating Finish is a semi-transparent stain. This product is formulated to seal, color and provide exceptional durability when used on bare wood or masonry surfaces. This rich blend of oil and resin gives hardwood floors a soft, satiny sheen. Its unique formulation provides a surface that can be topcoated in two hours. DuraSeal Quick Coat Penetrating Finish is available in existing DuraSeal colors as well as many Certified Minwax colors. It can be used with or without a finish coat, and is compatible with all DuraSeal  water-borne and oil-modified finish system.
Materials Check-list:
  • To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Please click the "Materials" tab  to locate the materials check-list for a list of the recommended  tools.

Color:

  • DuraSeal Quick Coat Penetrating Finish gives hardwood floors a soft, satiny sheen. 

Coverage:

  • DuraSeal Quick Coat Penetrating Finish covers approximately 500 square feet per gallon. While a second coat is optional, this product will cover approximately 800 square feet per gallon. 

Dry Time and Cure:

  • DuraSeal Quick Coat Penetrating Finish dries in approximately 2-3 hours. Note: Dry time is based on conditions of 77 F and 50% relative humidity. 

Clean-up:

  • Clean equipment using paint thinner or mineral spirits.

Storage:

  • Always store at room temperature. If stored at high temperature, cool to room temperature before use. Keep from freezing. 

Application Hints:

  • Read the "HOW TO" tab of this listing for application hints.

Surface Preparation:

  1. Properly prepare surface according to NWFA approved methods. Use a No. 100 grit screen for the final screening cut. 
  2. Remove all dust  with a broom and/or vacuum and tack the surface with a clean cloth moistened with mineral spirits. 

Application:

  1. Stir or shake material thoroughly before and occasionally during use. Apply a test sample on  a small inconspicuous area before proceeding with the entire job. If desired DuraSeal Quick Coat Penetrating Finish in Neutral can be used to lighten any standard DuraSeal wood tone.
  2. Apply the first coat of DuraSeal Quick Coat Penetrating Finish liberally with a brush, lamb wool applicator or cloth at a coverage rate of approximately 500 square feet per gallon.
  3. Allow to penetrate for 5-8 minutes then remove any excess by wiping with rags or by buffing with #2 steel wool. Removal of all excess material is essential to ensure proper dry time and adhesion of the finish coat. 
  4. If desired, apply a thin second coat at a coverage rate of approximately 800 square feet per gallon. Allow to penetrate and remove excess material in the same manner as the first coat [step 3 above].
  5. Allow the final coat to dry at least 2 hours and apply a DuraSeal finish coat of your choice. 

Maintenance:

  • Regularly remove dust  and dirt by sweeping or vacuuming. Periodic buffing will renew luster. Exceptionally worn areas may require an additional finish coat. Maintained floors sealed only with DuraSeal Quick Coat Penetrating Finish with DuraSeal Renovator Cleaner and Reconditioner.
Materials Check-list:

To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Listed below are a few recommended tools.

(MSDS)

(PDS)

(California Prop 65 Labeling Requirements)

Click the link below to see a short video of this product in use and for some ideas for how to get the best results. 

DuraSeal Quick Coat Stain - Neutral Gallon

Manufacturer: DuraSeal
Product ID: 811100000
Price: $46.15
QTY Add to cart
DuraSeal Quick Coat Penetrating Finish
Neutral Gallon
 
DuraSeal Quick Coat Penetrating Finish is a semi-transparent stain. This product is formulated to seal, color and provide exceptional durability when used on bare wood or masonry surfaces. This rich blend of oil and resin gives hardwood floors a soft, satiny sheen. Its unique formulation provides a surface that can be topcoated in two hours. DuraSeal Quick Coat Penetrating Finish is available in existing DuraSeal colors as well as many Certified Minwax colors. It can be used with or without a finish coat, and is compatible with all DuraSeal water-borne and oil-modified finish system.


Materials Check-list:
  • To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Please click the "Materials" tab  to locate the materials check-list for a list of the recommended  tools.

Color:

  • DuraSeal Quick Coat Penetrating Finish gives hardwood floors a soft, satiny sheen. 

Coverage:

  • DuraSeal Quick Coat Penetrating Finish covers approximately 500 square feet per gallon. While a second coat is optional, this product will cover approximately 800 square feet per gallon. 

Dry Time and Cure:

  • DuraSeal Quick Coat Penetrating Finish dries in approximately 2-3 hours. Note: Dry time is based on conditions of 77 F and 50% relative humidity. 

Clean-up:

  • Clean equipment using paint thinner or mineral spirits.

Storage:

  • Always store at room temperature. If stored at high temperature, cool to room temperature before use. Keep from freezing. 

Application Hints:

  • Read the "HOW TO" tab of this listing for application hints.

Surface Preparation:

  1. Properly prepare surface according to NWFA approved methods. Use a No. 100 grit screen for the final screening cut. 
  2. Remove all dust  with a broom and/or vacuum and tack the surface with a clean cloth moistened with mineral spirits. 

Application:

  1. Stir or shake material thoroughly before and occasionally during use. Apply a test sample on  a small inconspicuous area before proceeding with the entire job. If desired DuraSeal Quick Coat Penetrating Finish in Neutral can be used to lighten any standard DuraSeal wood tone.
  2. Apply the first coat of DuraSeal Quick Coat Penetrating Finish liberally with a brush, lamb wool applicator or cloth at a coverage rate of approximately 500 square feet per gallon.
  3. Allow to penetrate for 5-8 minutes then remove any excess by wiping with rags or by buffing with #2 steel wool. Removal of all excess material is essential to ensure proper dry time and adhesion of the finish coat. 
  4. If desired, apply a thin second coat at a coverage rate of approximately 800 square feet per gallon. Allow to penetrate and remove excess material in the same manner as the first coat [step 3 above].
  5. Allow the final coat to dry at least 2 hours and apply a DuraSeal finish coat of your choice. 

Maintenance:

  • Regularly remove dust  and dirt by sweeping or vacuuming. Periodic buffing will renew luster. Exceptionally worn areas may require an additional finish coat. Maintained floors sealed only with DuraSeal Quick Coat Penetrating Finish with DuraSeal Renovator Cleaner and Reconditioner.
Materials Check-list:

To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Listed below are a few recommended tools.

(MSDS)

(PDS)

(California Prop 65 Labeling Requirements)

Click the link below to see a short video of this product in use and for some ideas for how to get the best results. 

DuraSeal Quick Coat Stain - Nutmeg Gallon

Manufacturer: DuraSeal
Product ID: 811020000
Price: $46.15
QTY Add to cart
DuraSeal Quick Coat Penetrating Finish
Nutmeg Gallon
 
DuraSeal Quick Coat Penetrating Finish is a semi-transparent stain. This product is formulated to seal, color and provide exceptional durability when used on bare wood or masonry surfaces. This rich blend of oil and resin gives hardwood floors a soft, satiny sheen. Its unique formulation provides a surface that can be topcoated in two hours. DuraSeal Quick Coat Penetrating Finish is available in existing DuraSeal colors as well as many Certified Minwax colors. It can be used with or without a finish coat, and is compatible with all DuraSeal  water-borne and oil-modified finish system.


Materials Check-list:
  • To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Please click the "Materials" tab  to locate the materials check-list for a list of the recommended  tools.

Color:

  • DuraSeal Quick Coat Penetrating Finish gives hardwood floors a soft, satiny sheen. 

Coverage:

  • DuraSeal Quick Coat Penetrating Finish covers approximately 500 square feet per gallon. While a second coat is optional, this product will cover approximately 800 square feet per gallon. 

Dry Time and Cure:

  • DuraSeal Quick Coat Penetrating Finish dries in approximately 2-3 hours. Note: Dry time is based on conditions of 77 F and 50% relative humidity. 

Clean-up:

  • Clean equipment using paint thinner or mineral spirits.

Storage:

  • Always store at room temperature. If stored at high temperature, cool to room temperature before use. Keep from freezing. 

Application Hints:

  • Read the "HOW TO" tab of this listing for application hints.

Surface Preparation:

  1. Properly prepare surface according to NWFA approved methods. Use a No. 100 grit screen for the final screening cut. 
  2. Remove all dust  with a broom and/or vacuum and tack the surface with a clean cloth moistened with mineral spirits. 

Application:

  1. Stir or shake material thoroughly before and occasionally during use. Apply a test sample on  a small inconspicuous area before proceeding with the entire job. If desired DuraSeal Quick Coat Penetrating Finish in Neutral can be used to lighten any standard DuraSeal wood tone.
  2. Apply the first coat of DuraSeal Quick Coat Penetrating Finish liberally with a brush, lamb wool applicator or cloth at a coverage rate of approximately 500 square feet per gallon.
  3. Allow to penetrate for 5-8 minutes then remove any excess by wiping with rags or by buffing with #2 steel wool. Removal of all excess material is essential to ensure proper dry time and adhesion of the finish coat. 
  4. If desired, apply a thin second coat at a coverage rate of approximately 800 square feet per gallon. Allow to penetrate and remove excess material in the same manner as the first coat [step 3 above].
  5. Allow the final coat to dry at least 2 hours and apply a DuraSeal finish coat of your choice. 

Maintenance:

  • Regularly remove dust  and dirt by sweeping or vacuuming. Periodic buffing will renew luster. Exceptionally worn areas may require an additional finish coat. Maintained floors sealed only with DuraSeal Quick Coat Penetrating Finish with DuraSeal Renovator Cleaner and Reconditioner.
Materials Check-list:

To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Listed below are a few recommended tools.

(MSDS)

(PDS)

(California Prop 65 Labeling Requirements)

Click the link below to see a short video of this product in use and for some ideas for how to get the best results. 

DuraSeal Quick Coat Stain - Provincial Gallon

Manufacturer: DuraSeal
Product ID: 811110000
Price: $46.15
QTY Add to cart
DuraSeal Quick Coat Penetrating Finish
Provincial Gallon
 
DuraSeal Quick Coat Penetrating Finish is a semi-transparent stain. This product is formulated to seal, color and provide exceptional durability when used on bare wood or masonry surfaces. This rich blend of oil and resin gives hardwood floors a soft, satiny sheen. Its unique formulation provides a surface that can be topcoated in two hours. DuraSeal Quick Coat Penetrating Finish is available in existing DuraSeal colors as well as many Certified Minwax colors. It can be used with or without a finish coat, and is compatible with all DuraSeal  water-borne and oil-modified finish system.


Materials Check-list:
  • To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Please click the "Materials" tab  to locate the materials check-list for a list of the recommended  tools.

Color:

  • DuraSeal Quick Coat Penetrating Finish gives hardwood floors a soft, satiny sheen. 

Coverage:

  • DuraSeal Quick Coat Penetrating Finish covers approximately 500 square feet per gallon. While a second coat is optional, this product will cover approximately 800 square feet per gallon. 

Dry Time and Cure:

  • DuraSeal Quick Coat Penetrating Finish dries in approximately 2-3 hours. Note: Dry time is based on conditions of 77 F and 50% relative humidity. 

Clean-up:

  • Clean equipment using paint thinner or mineral spirits.

Storage:

  • Always store at room temperature. If stored at high temperature, cool to room temperature before use. Keep from freezing. 

Application Hints:

  • Read the "HOW TO" tab of this listing for application hints.

Surface Preparation:

  1. Properly prepare surface according to NWFA approved methods. Use a No. 100 grit screen for the final screening cut. 
  2. Remove all dust  with a broom and/or vacuum and tack the surface with a clean cloth moistened with mineral spirits. 

Application:

  1. Stir or shake material thoroughly before and occasionally during use. Apply a test sample on  a small inconspicuous area before proceeding with the entire job. If desired DuraSeal Quick Coat Penetrating Finish in Neutral can be used to lighten any standard DuraSeal wood tone.
  2. Apply the first coat of DuraSeal Quick Coat Penetrating Finish liberally with a brush, lamb wool applicator or cloth at a coverage rate of approximately 500 square feet per gallon.
  3. Allow to penetrate for 5-8 minutes then remove any excess by wiping with rags or by buffing with #2 steel wool. Removal of all excess material is essential to ensure proper dry time and adhesion of the finish coat. 
  4. If desired, apply a thin second coat at a coverage rate of approximately 800 square feet per gallon. Allow to penetrate and remove excess material in the same manner as the first coat [step 3 above].
  5. Allow the final coat to dry at least 2 hours and apply a DuraSeal finish coat of your choice. 

Maintenance:

  • Regularly remove dust  and dirt by sweeping or vacuuming. Periodic buffing will renew luster. Exceptionally worn areas may require an additional finish coat. Maintained floors sealed only with DuraSeal Quick Coat Penetrating Finish with DuraSeal Renovator Cleaner and Reconditioner.
Materials Check-list:

To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Listed below are a few recommended tools.

(MSDS)

(PDS)

(California Prop 65 Labeling Requirements)

Click the link below to see a short video of this product in use and for some ideas for how to get the best results. 

DuraSeal Quick Coat Stain - Red Mahogany Gallon

Manufacturer: DuraSeal
Product ID: 811250000
Price: $46.15
QTY Add to cart
DuraSeal Quick Coat Penetrating Finish
Red Mahogany Gallon
 
DuraSeal Quick Coat Penetrating Finish is a semi-transparent stain. This product is formulated to seal, color and provide exceptional durability when used on bare wood or masonry surfaces. This rich blend of oil and resin gives hardwood floors a soft, satiny sheen. Its unique formulation provides a surface that can be topcoated in two hours. DuraSeal Quick Coat Penetrating Finish is available in existing DuraSeal colors as well as many Certified Minwax colors. It can be used with or without a finish coat, and is compatible with all DuraSeal  water-borne and oil-modified finish system.


Materials Check-list:
  • To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Please click the "Materials" tab  to locate the materials check-list for a list of the recommended  tools.

Color:

  • DuraSeal Quick Coat Penetrating Finish gives hardwood floors a soft, satiny sheen. 

Coverage:

  • DuraSeal Quick Coat Penetrating Finish covers approximately 500 square feet per gallon. While a second coat is optional, this product will cover approximately 800 square feet per gallon. 

Dry Time and Cure:

  • DuraSeal Quick Coat Penetrating Finish dries in approximately 2-3 hours. Note: Dry time is based on conditions of 77 F and 50% relative humidity. 

Clean-up:

  • Clean equipment using paint thinner or mineral spirits.

Storage:

  • Always store at room temperature. If stored at high temperature, cool to room temperature before use. Keep from freezing. 

Application Hints:

  • Read the "HOW TO" tab of this listing for application hints.

Surface Preparation:

  1. Properly prepare surface according to NWFA approved methods. Use a No. 100 grit screen for the final screening cut. 
  2. Remove all dust  with a broom and/or vacuum and tack the surface with a clean cloth moistened with mineral spirits. 

Application:

  1. Stir or shake material thoroughly before and occasionally during use. Apply a test sample on  a small inconspicuous area before proceeding with the entire job. If desired DuraSeal Quick Coat Penetrating Finish in Neutral can be used to lighten any standard DuraSeal wood tone.
  2. Apply the first coat of DuraSeal Quick Coat Penetrating Finish liberally with a brush, lamb wool applicator or cloth at a coverage rate of approximately 500 square feet per gallon.
  3. Allow to penetrate for 5-8 minutes then remove any excess by wiping with rags or by buffing with #2 steel wool. Removal of all excess material is essential to ensure proper dry time and adhesion of the finish coat. 
  4. If desired, apply a thin second coat at a coverage rate of approximately 800 square feet per gallon. Allow to penetrate and remove excess material in the same manner as the first coat [step 3 above].
  5. Allow the final coat to dry at least 2 hours and  apply a DuraSeal finish coat of your choice. 

Maintenance:

  • Regularly remove dust  and dirt by sweeping or vacuuming. Periodic buffing will renew luster. Exceptionally worn areas may require an additional finish coat. Maintained floors sealed only with DuraSeal Quick Coat Penetrating Finish with DuraSeal Renovator Cleaner and Reconditioner.
Materials Check-list:

To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Listed below are a few recommended tools.

(MSDS)

(PDS)

(California Prop 65 Labeling Requirements)

Click the link below to see a short video of this product in use and for some ideas for how to get the best results. 

DuraSeal Quick Coat Stain - Rosewood Gallon

Manufacturer: DuraSeal
Product ID: 811390000
Price: $46.15
QTY Add to cart
DuraSeal Quick Coat Penetrating Finish
Rosewood Gallon
 
DuraSeal Quick Coat Penetrating Finish is a semi-transparent stain. This product is formulated to seal, color and provide exceptional durability when used on bare wood or masonry surfaces. This rich blend of oil and resin gives hardwood floors a soft, satiny sheen. Its unique formulation provides a surface that can be topcoated in two hours. DuraSeal Quick Coat Penetrating Finish is available in existing DuraSeal colors as well as many Certified Minwax colors. It can be used with or without a finish coat, and is compatible with all DuraSeal  water-borne and oil-modified finish system.
Materials Check-list:
  • To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Please click the "Materials" tab  to locate the materials check-list for a list of the recommended  tools.

Color:

  • DuraSeal Quick Coat Penetrating Finish gives hardwood floors a soft, satiny sheen. 

Coverage:

  • DuraSeal Quick Coat Penetrating Finish covers approximately 500 square feet per gallon. While a second coat is optional, this product will cover approximately 800 square feet per gallon. 

Dry Time and Cure:

  • DuraSeal Quick Coat Penetrating Finish dries in approximately 2-3 hours. Note: Dry time is based on conditions of 77 F and 50% relative humidity. 

Clean-up:

  • Clean equipment using paint thinner or mineral spirits.

Storage:

  • Always store at room temperature. If stored at high temperature, cool to room temperature before use. Keep from freezing. 

Application Hints:

  • Read the "HOW TO" tab of this listing for application hints.

Surface Preparation:

  1. Properly prepare surface according to NWFA approved methods. Use a No. 100 grit screen for the final screening cut. 
  2. Remove all dust  with a broom and/or vacuum and tack the surface with a clean cloth moistened with mineral spirits. 

Application:

  1. Stir or shake material thoroughly before and occasionally during use. Apply a test sample on  a small inconspicuous area before proceeding with the entire job. If desired DuraSeal Quick Coat Penetrating Finish in Neutral can be used to lighten any standard DuraSeal wood tone.
  2. Apply the first coat of DuraSeal Quick Coat Penetrating Finish liberally with a brush, lamb wool applicator or cloth at a coverage rate of approximately 500 square feet per gallon.
  3. Allow to penetrate for 5-8 minutes then remove any excess by wiping with rags or by buffing with #2 steel wool. Removal of all excess material is essential to ensure proper dry time and adhesion of the finish coat. 
  4. If desired, apply a thin second coat at a coverage rate of approximately 800 square feet per gallon. Allow to penetrate and remove excess material in the same manner as the first coat [step 3 above].
  5. Allow the final coat to dry at least 2 hours and apply a DuraSeal finish coat of your choice. 

Maintenance:

  • Regularly remove dust  and dirt by sweeping or vacuuming. Periodic buffing will renew luster. Exceptionally worn areas may require an additional finish coat. Maintained floors sealed only with DuraSeal Quick Coat Penetrating Finish with DuraSeal Renovator Cleaner and Reconditioner.
Materials Check-list:

To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Listed below are a few recommended tools.

(MSDS)

(PDS)

(California Prop 65 Labeling Requirements)

Click the link below to see a short video of this product in use and for some ideas for how to get the best results. 

DuraSeal Quick Coat Stain - Royal Mahogany Gallon

Manufacturer: DuraSeal
Product ID: 811080000
Price: $46.15
QTY Add to cart
DuraSeal Quick Coat Penetrating Finish
Royal Mahogany Gallon
 
DuraSeal Quick Coat Penetrating Finish is a semi-transparent stain. This product is formulated to seal, color and provide exceptional durability when used on bare wood or masonry surfaces. This rich blend of oil and resin gives hardwood floors a soft, satiny sheen. Its unique formulation provides a surface that can be topcoated in two hours. DuraSeal Quick Coat Penetrating Finish is available in existing DuraSeal colors as well as many Certified Minwax colors. It can be used with or without a finish coat, and is compatible with all DuraSeal  water-borne and oil-modified finish system.


Materials Check-list:
  • To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Please click the "Materials" tab  to locate the materials check-list for a list of the recommended  tools.

Color:

  • DuraSeal Quick Coat Penetrating Finish gives hardwood floors a soft, satiny sheen. 

Coverage:

  • DuraSeal Quick Coat Penetrating Finish covers approximately 500 square feet per gallon. While a second coat is optional, this product will cover approximately 800 square feet per gallon. 

Dry Time and Cure:

  • DuraSeal Quick Coat Penetrating Finish dries in approximately 2-3 hours. Note: Dry time is based on conditions of 77 F and 50% relative humidity. 

Clean-up:

  • Clean equipment using paint thinner or mineral spirits.

Storage:

  • Always store at room temperature. If stored at high temperature, cool to room temperature before use. Keep from freezing. 

Application Hints:

  • Read the "HOW TO" tab of this listing for application hints.

Surface Preparation:

  1. Properly prepare surface according to NWFA approved methods. Use a No. 100 grit screen for the final screening cut. 
  2. Remove all dust  with a broom and/or vacuum and tack the surface with a clean cloth moistened with mineral spirits. 

Application:

  1. Stir or shake material thoroughly before and occasionally during use. Apply a test sample on  a small inconspicuous area before proceeding with the entire job. If desired DuraSeal Quick Coat Penetrating Finish in Neutral can be used to lighten any standard DuraSeal wood tone.
  2. Apply the first coat of DuraSeal Quick Coat Penetrating Finish liberally with a brush, lamb wool applicator or cloth at a coverage rate of approximately 500 square feet per gallon.
  3. Allow to penetrate for 5-8 minutes then remove any excess by wiping with rags or by buffing with #2 steel wool. Removal of all excess material is essential to ensure proper dry time and adhesion of the finish coat. 
  4. If desired, apply a thin second coat at a coverage rate of approximately 800 square feet per gallon. Allow to penetrate and remove excess material in the same manner as the first coat [step 3 above].
  5. Allow the final coat to dry at least 2 hours and apply a DuraSeal finish coat of your choice. 

Maintenance:

  • Regularly remove dust  and dirt by sweeping or vacuuming. Periodic buffing will renew luster. Exceptionally worn areas may require an additional finish coat. Maintained floors sealed only with DuraSeal Quick Coat Penetrating Finish with DuraSeal Renovator Cleaner and Reconditioner.
Materials Check-list:

To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Listed below are a few recommended tools.

(MSDS)

(PDS)

(California Prop 65 Labeling Requirements)

Click the link below to see a short video of this product in use and for some ideas for how to get the best results. 

DuraSeal Quick Coat Stain - Sedona Red Gallon

Manufacturer: DuraSeal
Product ID: 811430000
Price: $46.15
QTY Add to cart
DuraSeal Quick Coat Penetrating Finish
Sedona Red Gallon
 
DuraSeal Quick Coat Penetrating Finish is a semi-transparent stain. This product is formulated to seal, color and provide exceptional durability when used on bare wood or masonry surfaces. This rich blend of oil and resin gives hardwood floors a soft, satiny sheen. Its unique formulation provides a surface that can be topcoated in two hours. DuraSeal Quick Coat Penetrating Finish is available in existing DuraSeal colors as well as many Certified Minwax colors. It can be used with or without a finish coat, and is compatible with all DuraSeal  water-borne and oil-modified finish system.
Materials Check-list:
  • To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Please click the "Materials" tab  to locate the materials check-list for a list of the recommended  tools.

Color:

  • DuraSeal Quick Coat Penetrating Finish gives hardwood floors a soft, satiny sheen. 

Coverage:

  • DuraSeal Quick Coat Penetrating Finish covers approximately 500 square feet per gallon. While a second coat is optional, this product will cover approximately 800 square feet per gallon. 

Dry Time and Cure:

  • DuraSeal Quick Coat Penetrating Finish dries in approximately 2-3 hours. Note: Dry time is based on conditions of 77 F and 50% relative humidity. 

Clean-up:

  • Clean equipment using paint thinner or mineral spirits.

Storage:

  • Always store at room temperature. If stored at high temperature, cool to room temperature before use. Keep from freezing. 

Application Hints:

  • Read the "HOW TO" tab of this listing for application hints.

Surface Preparation:

  1. Properly prepare surface according to NWFA approved methods. Use a No. 100 grit screen for the final screening cut. 
  2. Remove all dust  with a broom and/or vacuum and tack the surface with a clean cloth moistened with mineral spirits. 

Application:

  1. Stir or shake material thoroughly before and occasionally during use. Apply a test sample on  a small inconspicuous area before proceeding with the entire job. If desired DuraSeal Quick Coat Penetrating Finish in Neutral can be used to lighten any standard DuraSeal wood tone.
  2. Apply the first coat of DuraSeal Quick Coat Penetrating Finish liberally with a brush, lamb wool applicator or cloth at a coverage rate of approximately 500 square feet per gallon.
  3. Allow to penetrate for 5-8 minutes then remove any excess by wiping with rags or by buffing with #2 steel wool. Removal of all excess material is essential to ensure proper dry time and adhesion of the finish coat. 
  4. If desired, apply a thin second coat at a coverage rate of approximately 800 square feet per gallon. Allow to penetrate and remove excess material in the same manner as the first coat [step 3 above].
  5. Allow the final coat to dry at least 2 hours and apply a DuraSeal finish coat of your choice. 

Maintenance:

  • Regularly remove dust  and dirt by sweeping or vacuuming. Periodic buffing will renew luster. Exceptionally worn areas may require an additional finish coat. Maintained floors sealed only with DuraSeal Quick Coat Penetrating Finish with DuraSeal Renovator Cleaner and Reconditioner.
Materials Check-list:

To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Listed below are a few recommended tools.

(MSDS)

(PDS)

(California Prop 65 Labeling Requirements)

Click the link below to see a short video of this product in use and for some ideas for how to get the best results. 

DuraSeal Quick Coat Stain - Special Walnut Gallon

Manufacturer: Sherwin-Williams
Product ID: 811240000
Price: $46.15
QTY Add to cart
DuraSeal Quick Coat Penetrating Finish
Special Walnut Gallon
 
DuraSeal Quick Coat Penetrating Finish is a semi-transparent stain. This product is formulated to seal, color and provide exceptional durability when used on bare wood or masonry surfaces. This rich blend of oil and resin gives hardwood floors a soft, satiny sheen. Its unique formulation provides a surface that can be topcoated in two hours. DuraSeal Quick Coat Penetrating Finish is available in existing DuraSeal colors as well as many Certified Minwax colors. It can be used with or without a finish coat, and is compatible with all DuraSeal  water-borne and oil-modified finish system.
Materials Check-list:
  • To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Please click the "Materials" tab  to locate the materials check-list for a list of the recommended  tools.

Color:

  • DuraSeal Quick Coat Penetrating Finish gives hardwood floors a soft, satiny sheen. 

Coverage:

  • DuraSeal Quick Coat Penetrating Finish covers approximately 500 square feet per gallon. While a second coat is optional, this product will cover approximately 800 square feet per gallon. 

Dry Time and Cure:

  • DuraSeal Quick Coat Penetrating Finish dries in approximately 2-3 hours. Note: Dry time is based on conditions of 77 F and 50% relative humidity. 

Clean-up:

  • Clean equipment using paint thinner or mineral spirits.

Storage:

  • Always store at room temperature. If stored at high temperature, cool to room temperature before use. Keep from freezing. 

Application Hints:

  • Read the "HOW TO" tab of this listing for application hints.

Surface Preparation:

  1. Properly prepare surface according to NWFA approved methods. Use a No. 100 grit screen for the final screening cut. 
  2. Remove all dust  with a broom and/or vacuum and tack the surface with a clean cloth moistened with mineral spirits. 

Application:

  1. Stir or shake material thoroughly before and occasionally during use. Apply a test sample on  a small inconspicuous area before proceeding with the entire job. If desired DuraSeal Quick Coat Penetrating Finish in Neutral can be used to lighten any standard DuraSeal wood tone.
  2. Apply the first coat of DuraSeal Quick Coat Penetrating Finish liberally with a brush, lamb wool applicator or cloth at a coverage rate of approximately 500 square feet per gallon.
  3. Allow to penetrate for 5-8 minutes then remove any excess by wiping with rags or by buffing with #2 steel wool. Removal of all excess material is essential to ensure proper dry time and adhesion of the finish coat. 
  4. If desired, apply a thin second coat at a coverage rate of approximately 800 square feet per gallon. Allow to penetrate and remove excess material in the same manner as the first coat [step 3 above].
  5. Allow the final coat to dry at least 2 hours and apply a DuraSeal finish coat of your choice. 

Maintenance:

  • Regularly remove dust  and dirt by sweeping or vacuuming. Periodic buffing will renew luster. Exceptionally worn areas may require an additional finish coat. Maintained floors sealed only with DuraSeal Quick Coat Penetrating Finish with DuraSeal Renovator Cleaner and Reconditioner.
Materials Check-list:

To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Listed below are a few recommended tools.

(MSDS)

(PDS)

(California Prop 65 Labeling Requirements)

Click the link below to see a short video of this product in use and for some ideas for how to get the best results. 

DuraSeal Quick Coat Stain - Spice Brown Gallon

Manufacturer: DuraSeal
Product ID: 811370000
Price: $46.15
QTY Add to cart
DuraSeal Quick Coat Penetrating Finish
Spice Brown Gallon
 
DuraSeal Quick Coat Penetrating Finish is a semi-transparent stain. This product is formulated to seal, color and provide exceptional durability when used on bare wood or masonry surfaces. This rich blend of oil and resin gives hardwood floors a soft, satiny sheen. Its unique formulation provides a surface that can be topcoated in two hours. DuraSeal Quick Coat Penetrating Finish is available in existing DuraSeal colors as well as many Certified Minwax colors. It can be used with or without a finish coat, and is compatible with all DuraSeal  water-borne and oil-modified finish system.
Materials Check-list:
  • To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Please click the "Materials" tab  to locate the materials check-list for a list of the recommended  tools.

Color:

  • DuraSeal Quick Coat Penetrating Finish gives hardwood floors a soft, satiny sheen. 

Coverage:

  • DuraSeal Quick Coat Penetrating Finish covers approximately 500 square feet per gallon. While a second coat is optional, this product will cover approximately 800 square feet per gallon. 

Dry Time and Cure:

  • DuraSeal Quick Coat Penetrating Finish dries in approximately 2-3 hours. Note: Dry time is based on conditions of 77 F and 50% relative humidity. 

Clean-up:

  • Clean equipment using paint thinner or mineral spirits.

Storage:

  • Always store at room temperature. If stored at high temperature, cool to room temperature before use. Keep from freezing. 

Application Hints:

  • Read the "HOW TO" tab of this listing for application hints.

Surface Preparation:

  1. Properly prepare surface according to NWFA approved methods. Use a No. 100 grit screen for the final screening cut. 
  2. Remove all dust  with a broom and/or vacuum and tack the surface with a clean cloth moistened with mineral spirits. 

Application:

  1. Stir or shake material thoroughly before and occasionally during use. Apply a test sample on  a small inconspicuous area before proceeding with the entire job. If desired DuraSeal Quick Coat Penetrating Finish in Neutral can be used to lighten any standard DuraSeal wood tone.
  2. Apply the first coat of DuraSeal Quick Coat Penetrating Finish liberally with a brush, lamb wool applicator or cloth at a coverage rate of approximately 500 square feet per gallon.
  3. Allow to penetrate for 5-8 minutes then remove any excess by wiping with rags or by buffing with #2 steel wool. Removal of all excess material is essential to ensure proper dry time and adhesion of the finish coat. 
  4. If desired, apply a thin second coat at a coverage rate of approximately 800 square feet per gallon. Allow to penetrate and remove excess material in the same manner as the first coat [step 3 above].
  5. Allow the final coat to dry at least 2 hours and apply a DuraSeal finish coat of your choice. 

Maintenance:

  • Regularly remove dust  and dirt by sweeping or vacuuming. Periodic buffing will renew luster. Exceptionally worn areas may require an additional finish coat. Maintained floors sealed only with DuraSeal Quick Coat Penetrating Finish with DuraSeal Renovator Cleaner and Reconditioner.
Materials Check-list:

To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Listed below are a few recommended tools.

(MSDS)

(PDS)

(California Prop 65 Labeling Requirements)

Click the link below to see a short video of this product in use and for some ideas for how to get the best results. 

DuraSeal Quick Coat Stain - True Black Gallon

Manufacturer: Sherwin-Williams
Product ID: 811990000
Price: $46.15
QTY Add to cart
DuraSeal Quick Coat Penetrating Finish
True Black Gallon
 
DuraSeal Quick Coat Penetrating Finish is a semi-transparent stain. This product is formulated to seal, color and provide exceptional durability when used on bare wood or masonry surfaces. This rich blend of oil and resin gives hardwood floors a soft, satiny sheen. Its unique formulation provides a surface that can be topcoated in two hours. DuraSeal Quick Coat Penetrating Finish is available in existing DuraSeal colors as well as many Certified Minwax colors. It can be used with or without a finish coat, and is compatible with all DuraSeal  water-borne and oil-modified finish system.
Materials Check-list:
  • To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Please click the "Materials" tab  to locate the materials check-list for a list of the recommended  tools.

Color:

  • DuraSeal Quick Coat Penetrating Finish gives hardwood floors a soft, satiny sheen. 

Coverage:

  • DuraSeal Quick Coat Penetrating Finish covers approximately 500 square feet per gallon. While a second coat is optional, this product will cover approximately 800 square feet per gallon. 

Dry Time and Cure:

  • DuraSeal Quick Coat Penetrating Finish dries in approximately 2-3 hours. Note: Dry time is based on conditions of 77 F and 50% relative humidity. 

Clean-up:

  • Clean equipment using paint thinner or mineral spirits.

Storage:

  • Always store at room temperature. If stored at high temperature, cool to room temperature before use. Keep from freezing. 

Application Hints:

  • Read the "HOW TO" tab of this listing for application hints.

Surface Preparation:

  1. Properly prepare surface according to NWFA approved methods. Use a No. 100 grit screen for the final screening cut. 
  2. Remove all dust  with a broom and/or vacuum and tack the surface with a clean cloth moistened with mineral spirits. 

Application:

  1. Stir or shake material thoroughly before and occasionally during use. Apply a test sample on  a small inconspicuous area before proceeding with the entire job. If desired DuraSeal Quick Coat Penetrating Finish in Neutral can be used to lighten any standard DuraSeal wood tone.
  2. Apply the first coat of DuraSeal Quick Coat Penetrating Finish liberally with a brush, lamb wool applicator or cloth at a coverage rate of approximately 500 square feet per gallon.
  3. Allow to penetrate for 5-8 minutes then remove any excess by wiping with rags or by buffing with #2 steel wool. Removal of all excess material is essential to ensure proper dry time and adhesion of the finish coat. 
  4. If desired, apply a thin second coat at a coverage rate of approximately 800 square feet per gallon. Allow to penetrate and remove excess material in the same manner as the first coat [step 3 above].
  5. Allow the final coat to dry at least 2 hours and apply a DuraSeal finish coat of your choice. 

Maintenance:

  • Regularly remove dust  and dirt by sweeping or vacuuming. Periodic buffing will renew luster. Exceptionally worn areas may require an additional finish coat. Maintained floors sealed only with DuraSeal Quick Coat Penetrating Finish with DuraSeal Renovator Cleaner and Reconditioner.

Materials Check-list:

To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Listed below are a few recommended tools.

(MSDS)

(PDS)

(California Prop 65 Labeling Requirements)

Click the link below to see a short video of this product in use and for some ideas for how to get the best results. 

DuraSeal Quick Coat Stain - Weathered Oak Gallon

Manufacturer: DuraSeal
Product ID: 811700000
Price: $46.15
QTY Add to cart
DuraSeal Quick Coat Penetrating Finish
Weathered Oak Gallon
 
DuraSeal Quick Coat Penetrating Finish is a semi-transparent stain. This product is formulated to seal, color and provide exceptional durability when used on bare wood or masonry surfaces. This rich blend of oil and resin gives hardwood floors a soft, satiny sheen. Its unique formulation provides a surface that can be topcoated in two hours. DuraSeal Quick Coat Penetrating Finish is available in existing DuraSeal colors as well as many Certified Minwax colors. It can be used with or without a finish coat, and is compatible with all DuraSeal  water-borne and oil-modified finish system.
Materials Check-list:
  • To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Please click the "Materials" tab  to locate the materials check-list for a list of the recommended  tools.

Color:

  • DuraSeal Quick Coat Penetrating Finish gives hardwood floors a soft, satiny sheen. 

Coverage:

  • DuraSeal Quick Coat Penetrating Finish covers approximately 500 square feet per gallon. While a second coat is optional, this product will cover approximately 800 square feet per gallon. 

Dry Time and Cure:

  • DuraSeal Quick Coat Penetrating Finish dries in approximately 2-3 hours. Note: Dry time is based on conditions of 77 F and 50% relative humidity. 

Clean-up:

  • Clean equipment using paint thinner or mineral spirits.

Storage:

  • Always store at room temperature. If stored at high temperature, cool to room temperature before use. Keep from freezing. 

Application Hints:

  • Read the "HOW TO" tab of this listing for application hints.

Surface Preparation:

  1. Properly prepare surface according to NWFA approved methods. Use a No. 100 grit screen for the final screening cut. 
  2. Remove all dust  with a broom and/or vacuum and tack the surface with a clean cloth moistened with mineral spirits. 

Application:

  1. Stir or shake material thoroughly before and occasionally during use. Apply a test sample on  a small inconspicuous area before proceeding with the entire job. If desired DuraSeal Quick Coat Penetrating Finish in Neutral can be used to lighten any standard DuraSeal wood tone.
  2. Apply the first coat of DuraSeal Quick Coat Penetrating Finish liberally with a brush, lamb wool applicator or cloth at a coverage rate of approximately 500 square feet per gallon.
  3. Allow to penetrate for 5-8 minutes then remove any excess by wiping with rags or by buffing with #2 steel wool. Removal of all excess material is essential to ensure proper dry time and adhesion of the finish coat. 
  4. If desired, apply a thin second coat at a coverage rate of approximately 800 square feet per gallon. Allow to penetrate and remove excess material in the same manner as the first coat [step 3 above].
  5. Allow the final coat to dry at least 2 hours and apply a DuraSeal finish coat of your choice. 

Maintenance:

  • Regularly remove dust  and dirt by sweeping or vacuuming. Periodic buffing will renew luster. Exceptionally worn areas may require an additional finish coat. Maintained floors sealed only with DuraSeal Quick Coat Penetrating Finish with DuraSeal Renovator Cleaner and Reconditioner.
Materials Check-list:

To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Listed below are a few recommended tools.

(MSDS)

(PDS)

(California Prop 65 Labeling Requirements)

Click the link below to see a short video of this product in use and for some ideas for how to get the best results.