DuraSeal Penetrating Stain - Antique Brown Gallon

Manufacturer: DuraSeal
Product ID: 812160000
Price: $33.99
QTY Add to cart

DuraSeal Penetrating Finish

Antique Brown Gallon

DuraSeal Penetrating Finish is a semi-transparent stain. This product is formulated to seal, color and provide exceptional durability when used on bare wood and masonry surfaces. This rich blend of oil and resin gives hardwood floors a soft, satiny sheen. DuraSeal Penetrating Finish creates a bond with the wood that won't scratch or wear away. This product can be used with or without a finish coat. 

Materials Check-list:
  • To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Please click the "Materials" tab  to locate the materials check-list for a list of the recommended  tools.

Color:

  • DuraSeal Penetrating Finish gives hardwood floors a soft, satiny sheen. 

Coverage:

  • DuraSeal Penetrating Finish covers approximately 500 square feet per gallon. While a second coat is optional, this product will cover approximately 800 square feet per gallon. A second coat is not recommended when using  350 VOC  compliant material. 

Dry Time and Cure:

  • This product takes approximately 8 hours to overnight to dry. Note: Drying time will be increased  by high humidity, low temperature, lack of air movement or incomplete removal of excess stain. 

Clean-up:

  • Clean equipment using paint thinner, turpentine or mineral spirits. 

Storage:

  • Always store at room temperature. If stored at high temperature, cool to room temperature before use. Keep from freezing. 

Application Hints:

  • Read the "HOW TO" tab of this listing for application hints.

Surface Preparation:

  1. Properly prepare surface according to NWFA approved methods. 
  2. Use a No. 10 grit screen [80 grit for 201 White] for the final sanding cut.
  3. Remove all dust  with a broom and/or vacuum and tack the surface with a clean towel moistened with mineral spirits. 

Application:

  1. Stir or shake material thoroughly before and occasionally during use. Apply a test sample on  a small inconspicuous area before proceeding with the entire job. If desired DuraSeal Penetrating Finish in Neutral can be used to lighten any standard Penetrating Finish color.
  2. Apply the first coat of DuraSeal Penetrating Finish liberally with a brush, lamb wool applicator or cloth at a coverage rate of approximately 500 square feet per gallon.
  3. Allow to penetrate for 5-8 minutes then remove any excess by wiping with rags or by buffing with #2 steel wool. Removal of all excess material is essential to ensure proper try time. 
  4. Ff desired, apply a thin second coat at a coverage rate of approximately 800 square feet per gallon. Allow to penetrate and remove excess material in the same manner as the first coat [step 3 above]. Note: A second coat of DuraSeal Penetrating Finish is not recommended with 350 VOC compliant material .
  5. Allow the final coat to dry at least 8 hours [for best results overnight] and apply a finish coat of your choice. Note: for heavy traffic commercial applications, it is recommended that DuraSeal Penetrating Finish be used without a finish coat., and periodically maintained with DuraSeal Renovator Cleaner and Reconditioner.

Dry Time and Cure:

  • This product takes approximately 8 hours to overnight to dry. Note: Drying time will be increased  by high humidity, low temperature, lack of air movement or incomplete removal of excess stain. 

Maintenance:

  • Regularly remove dust  and dirt by sweeping or vacuuming. Periodic buffing will renew luster. Exceptionally worn areas may require an additional finish coat. Maintained floors sealed only with DuraSeal Penetrating Finish with DuraSeal Renovator Cleaner and Reconditioner.
Materials Check-list:

To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Listed below are a few recommended tools.

(MSDS)

(PDS)

(California Prop 65 Labeling Requirements)

Click the link below to see a short video of this product in use and for some ideas for how to get the best results. 

DuraSeal Penetrating Stain - Chestnut Gallon

Manufacturer: DuraSeal
Product ID: 812040000
Price: $33.99
QTY Add to cart

DuraSeal Penetrating Finish

Chestnut Gallon

DuraSeal Penetrating Finish is a semi-transparent stain. This product is formulated to seal, color and provide exceptional durability when used on bare wood and masonry surfaces. This rich blend of oil and resin gives hardwood floors a soft, satiny sheen. DuraSeal Penetrating Finish creates a bond with the wood that won't scratch or wear away. This product can be used with or without a finish coat. 

Materials Check-list:
  • To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Please click the "Materials" tab  to locate the materials check-list for a list of the recommended  tools.

Color:

  • DuraSeal Penetrating Finish gives hardwood floors a soft, satiny sheen. 

Coverage:

  • DuraSeal Penetrating Finish covers approximately 500 square feet per gallon. While a second coat is optional, this product will cover approximately 800 square feet per gallon. A second coat is not recommended when using  350 VOC  compliant material. 

Dry Time and Cure:

  • This product takes approximately 8 hours to overnight to dry. Note: Drying time will be increased  by high humidity, low temperature, lack of air movement or incomplete removal of excess stain. 

Clean-up:

  • Clean equipment using paint thinner, turpentine or mineral spirits. 

Storage:

  • Always store at room temperature. If stored at high temperature, cool to room temperature before use. Keep from freezing. 

Application Hints:

  • Read the "HOW TO" tab of this listing for application hints.

Surface Preparation:

  1. Properly prepare surface according to NWFA approved methods. 
  2. Use a No. 10 grit screen [80 grit for 201 White] for the final sanding cut.
  3. Remove all dust  with a broom and/or vacuum and tack the surface with a clean towel moistened with mineral spirits. 

Application:

  1. Stir or shake material thoroughly before and occasional during use. Apply a test sample on  a small inconspicuous area before proceeding with the entire job. If desired DuraSeal Penetrating Finish in Neutral can be used to lighten any standard Penetrating Finish color.
  2. Apply the first coat of DuraSeal Penetrating Finish liberally with a brush, lamb wool applicator or cloth at a coverage rate of approximately 500 square feet per gallon.
  3. Allow to penetrate for 5-8 minutes then remove any excess by wiping with rags or by buffing with #2 steel wool. Removal of all excess material is essential to ensure proper try time. 
  4. If desired, apply a thin second coat at a coverage rate of approximately 800 square feet per gallon. Allow to penetrate and remove excess material in the same manner as the first coat [step 3 above]. Note: A second coat of DuraSeal Penetrating Finish is not recommended with 350 VOC compliant material .
  5. Allow the final coat to dry at least 8 hours [for best results overnight] and apply a finish coat of your choice. Note: for heavy traffic commercial applications, it is recommended that DuraSeal Penetrating Finish be used without a finish coat., and periodically maintained with DuraSeal Renovator Cleaner and Reconditioner

Dry Time and Cure:

  • This product takes approximately 8 hours to overnight to dry. Note: Drying time will be increased  by high humidity, low temperature, lack of air movement or incomplete removal of excess stain. 

Maintenance:

  • Regularly remove dust  and dirt by sweeping or vacuuming. Periodic buffing will renew luster. Exceptionally worn areas may require an additional finish coat. Maintained floors sealed only with DuraSeal Penetrating Finish with DuraSeal Renovator Cleaner and Reconditioner.
Materials Check-list:

To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Listed below are a few recommended tools.

(MSDS)

(PDS)

(California Prop 65 Labeling Requirements)

Click the link below to see a short video of this product in use and for some ideas for how to get the best results. 

DuraSeal Penetrating Stain - Coffee Brown Gallon

Manufacturer: DuraSeal
Product ID: 812230000
Price: $33.99
QTY Add to cart

DuraSeal Penetrating Finish

Coffee Brown Gallon

DuraSeal Penetrating Finish is a semi-transparent stain. This product is formulated to seal, color and provide exceptional durability when used on bare wood and masonry surfaces. This rich blend of oil and resin gives hardwood floors a soft, satiny sheen. DuraSeal Penetrating Finish creates a bond with the wood that won't scratch or wear away. This product can be used with or without a finish coat. 

Materials Check-list:
  • To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Please click the "Materials" tab  to locate the materials check-list for a list of the recommended  tools.

Color:

  • DuraSeal Penetrating Finish gives hardwood floors a soft, satiny sheen. 

Coverage:

  • DuraSeal Penetrating Finish covers approximately 500 square feet per gallon. While a second coat is optional, this product will cover approximately 800 square feet per gallon. A second coat is not recommended when using  350 VOC  compliant material. 

Dry Time and Cure:

  • This product takes approximately 8 hours to overnight to dry. Note: Drying time will be increased  by high humidity, low temperature, lack of air movement or incomplete removal of excess stain. 

Clean-up:

  • Clean equipment using paint thinner, turpentine or mineral spirits. 

Storage:

  • Always store at room temperature. If stored at high temperature, cool to room temperature before use. Keep from freezing. 

Application Hints:

  • Read the "HOW TO" tab of this listing for application hints.

Surface Preparation:

  1. Properly prepare surface according to NWFA approved methods. 
  2. Use a No. 10 grit screen [80 grit for 201 White] for the final sanding cut.
  3. Remove all dust  with a broom and/or vacuum and tack the surface with a clean towel moistened with mineral spirits. 

Application:

  1. Stir or shake material thoroughly before and occasionally during use. Apply a test sample on  a small inconspicuous area before proceeding with the entire job. If desired DuraSeal Penetrating Finish in Neutral can be used to lighten any standard Penetrating Finish color.
  2. Apply the first coat of DuraSeal Penetrating Finish liberally with a brush, lamb wool applicator or cloth at a coverage rate of approximately 500 square feet per gallon.
  3. Allow to penetrate for 5-8 minutes then remove any excess by wiping with rags or by buffing with #2 steel wool. Removal of all excess material is essential to ensure proper try time. 
  4. Ff desired, apply a thin second coat at a coverage rate of approximately 800 square feet per gallon. Allow to penetrate and remove excess material in the same manner as the first coat [step 3 above]. Note: A second coat of DuraSeal Penetrating Finish is not recommended with 350 VOC compliant material .
  5. Allow the final coat to dry at least 8 hours [for best results overnight] and apply a finish coat of your choice. Note: for heavy traffic commercial applications, it is recommended that DuraSeal Penetrating Finish be used without a finish coat., and periodically maintained with DuraSeal Renovator Cleaner and Reconditioner

Dry Time and Cure:

  • This product takes approximately 8 hours to overnight to dry. Note: Drying time will be increased  by high humidity, low temperature, lack of air movement or incomplete removal of excess stain. 

Maintenance:

  • Regularly remove dust  and dirt by sweeping or vacuuming. Periodic buffing will renew luster. Exceptionally worn areas may require an additional finish coat. Maintained floors sealed only with DuraSeal Penetrating Finish with DuraSeal Renovator Cleaner and Reconditioner.
Materials Check-list:

To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Listed below are a few recommended tools.

(MSDS)

(PDS)

(California Prop 65 Labeling Requirements)

Click the link below to see a short video of this product in use and for some ideas for how to get the best results. 

DuraSeal Penetrating Stain - Ebony Gallon

Manufacturer: DuraSeal
Product ID: 812310000
Price: $33.99
QTY Add to cart

DuraSeal Penetrating Finish

Ebony Gallon

DuraSeal Penetrating Finish is a semi-transparent stain. This product is formulated to seal, color and provide exceptional durability when used on bare wood and masonry surfaces. This rich blend of oil and resin gives hardwood floors a soft, satiny sheen. DuraSeal Penetrating Finish creates a bond with the wood that won't scratch or wear away. This product can be used with or without a finish coat. 

Materials Check-list:
  • To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Please click the "Materials" tab  to locate the materials check-list for a list of the recommended  tools.

Color:

  • DuraSeal Penetrating Finish gives hardwood floors a soft, satiny sheen. 

Coverage:

  • DuraSeal Penetrating Finish covers approximately 500 square feet per gallon. While a second coat is optional, this product will gover approximately 800 square feet per gallon. A second coat is not recommended when using  350 VOC  compliant material. 

Dry Time and Cure:

  • This product takes approximately 8 hours to overnight to dry. Note: Drying time will be increased  by high humidity, low temperature, lack of air movement or incomplete removal of excess stain. 

Clean-up:

  • Clean equipment using paint thinner, turpentine or mineral spirits. 

 

Storage:

  • Always store at room temperature. If stored at high temperature, cool to room temperature before use. Keep from freezing. 

Application Hints:

  • Read the "HOW TO" tab of this listing for application hints.

Surface Preparation:

  1. Properly prepare surface according to NWFA approved methods. 
  2. Use a No. 10 grit screen [80 grit for 201 White] for the final sanding cut.
  3. Remove all dust  with a broom and/or vacuum and tack the surface with a clean towel moistened with mineral spirits. 

Application:

  1. Stir or shake material thoroughly before and occasionally during use. Apply a test sample on  a small inconspicuous area before proceeding with the entire job. If desired DuraSeal Penetrating Finish in Neutral can be used to lighten any standard Penetrating Finish color.
  2. Apply the first coat of DuraSeal Penetrating Finish liberally with a brush, lamb wool applicator or cloth at a coverage rate of approximately 500 square feet per gallon.
  3. Allow to penetrate for 5-8 minutes then remove any excess by wiping with rags or by buffing with #2 steel wool. Removal of all excess material is essential to ensure proper try time. 
  4. Ff desired, apply a thin second coat at a coverage rate of approximately 800 square feet per gallon. Allow to penetrate and remove excess material in the same manner as the first coat [step 3 above]. Note: A second coat of DuraSeal Penetrating Finish is not recommended with 350 VOC compliant material .
  5. Allow the final coat to dry at least 8 hours [for best results overnight] and apply a finish coat of your choice. Note: for heavy traffic commercial applications, it is recommended that DuraSeal Penetrating Finish be used without a finish coat., and periodically maintained with DuraSeal Renovator Cleaner and Reconditioner.

Dry Time and Cure:

  • This product takes approximately 8 hours to overnight to dry. Note: Drying time will be increased  by high humidity, low temperature, lack of air movement or incomplete removal of excess stain. 

Maintenance:

  • Regularly remove dust  and dirt by sweeping or vacuuming. Periodic buffing will renew luster. Exceptionally worn areas may require an additional finish coat. Maintained floors sealed only with DuraSeal Penetrating Finish with DuraSeal Renovator Cleaner and Reconditioner.
Materials Check-list:

To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Listed below are a few recommended tools.

(MSDS)

(PDS)

(California Prop 65 Labeling Requirements)

Click the link below to see a short video of this product in use and for some ideas for how to get the best results. 

DuraSeal Penetrating Stain - Golden Brown Gallon

Manufacturer: DuraSeal
Product ID: 812210000
Price: $33.99
QTY Add to cart

DuraSeal Penetrating Finish

Golden Brown Gallon

DuraSeal Penetrating Finish is a semi-transparent stain. This product is formulated to seal, color and provide exceptional durability when used on bare wood and masonry surfaces. This rich blend of oil and resin gives hardwood floors a soft, satiny sheen. DuraSeal Penetrating Finish creates a bond with the wood that won't scratch or wear away. This product can be used with or without a finish coat. 

Materials Check-list:
  • To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Please click the "Materials" tab  to locate the materials check-list for a list of the recommended  tools.

Color:

  • DuraSeal Penetrating Finish gives hardwood floors a soft, satiny sheen. 

Coverage:

  • DuraSeal Penetrating Finish covers approximately 500 square feet per gallon. While a second coat is optional, this product will cover approximately 800 square feet per gallon. A second coat is not recommended when using  350 VOC  compliant material. 

Dry Time and Cure:

  • This product takes approximately 8 hours to overnight to dry. Note: Drying time will be increased  by high humidity, low temperature, lack of air movement or incomplete removal of excess stain. 

Clean-up:

  • Clean equipment using paint thinner, turpentine or mineral spirits. 

Storage:

  • Always store at room temperature. If stored at high temperature, cool to room temperature before use. Keep from freezing. 

Application Hints:

  • Read the "HOW TO" tab of this listing for application hints.

Surface Preparation:

  1. Properly prepare surface according to NWFA approved methods. 
  2. Use a No. 10 grit screen [80 grit for 201 White] for the final sanding cut.
  3. Remove all dust  with a broom and/or vacuum and tack the surface with a clean towel moistened with mineral spirits. 

Application:

  1. Stir or shake material thoroughly before and occasionally during use. Apply a test sample on  a small inconspicuous area before proceeding with the entire job. If desired DuraSeal Penetrating Finish in Neutral can be used to lighten any standard Penetrating Finish color.
  2. Apply the first coat of DuraSeal Penetrating Finish liberally with a brush, lamb wool applicator or cloth at a coverage rate of approximately 500 square feet per gallon.
  3. Allow to penetrate for 5-8 minutes then remove any excess by wiping with rags or by buffing with #2 steel wool. Removal of all excess material is essential to ensure proper try time. 
  4. Ff desired, apply a thin second coat at a coverage rate of approximately 800 square feet per gallon. Allow to penetrate and remove excess material in the same manner as the first coat [step 3 above]. Note: A second coat of DuraSeal Penetrating Finish is not recommended with 350 VOC compliant material .
  5. Allow the final coat to dry at least 8 hours [for best results overnight] and apply a finish coat of your choice. Note: for heavy traffic commercial applications, it is recommended that DuraSeal Penetrating Finish be used without a finish coat., and periodically maintained with DuraSeal Renovator Cleaner and Reconditioner.

Dry Time and Cure:

  • This product takes approximately 8 hours to overnight to dry. Note: Drying time will be increased  by high humidity, low temperature, lack of air movement or incomplete removal of excess stain. 

Maintenance:

  • Regularly remove dust  and dirt by sweeping or vacuuming. Periodic buffing will renew luster. Exceptionally worn areas may require an additional finish coat. Maintained floors sealed only with DuraSeal Penetrating Finish with DuraSeal Renovator Cleaner and Reconditioner.
Materials Check-list:

To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Listed below are a few recommended tools.

(MSDS)

(PDS)

(California Prop 65 Labeling Requirements)

Click the link below to see a short video of this product in use and for some ideas for how to get the best results. 

DuraSeal Penetrating Stain - Medium Brown Gallon

Manufacturer: DuraSeal
Product ID: 812280000
Price: $33.99
QTY Add to cart

DuraSeal Penetrating Finish

Medium Brown Gallon

DuraSeal Penetrating Finish is a semi-transparent stain. This product is formulated to seal, color and provide exceptional durability when used on bare wood and masonry surfaces. This rich blend of oil and resin gives hardwood floors a soft, satiny sheen. DuraSeal Penetrating Finish creates a bond with the wood that won't scratch or wear away. This product can be used with or without a finish coat. 

Materials Check-list:
  • To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Please click the "Materials" tab  to locate the materials check-list for a list of the recommended  tools.

Color:

  • DuraSeal Penetrating Finish gives hardwood floors a soft, satiny sheen. 

Coverage:

  • DuraSeal Penetrating Finish covers approximately 500 square feet per gallon. While a second coat is optional, this product will cover approximately 800 square feet per gallon. A second coat is not recommended when using  350 VOC  compliant material. 

Dry Time and Cure:

  • This product takes approximately 8 hours to overnight to dry. Note: Drying time will be increased  by high humidity, low temperature, lack of air movement or incomplete removal of excess stain. 

Clean-up:

  • Clean equipment using paint thinner, turpentine or mineral spirits. 

 

Storage:

  • Always store at room temperature. If stored at high temperature, cool to room temperature before use. Keep from freezing. 

Application Hints:

  • Read the "HOW TO" tab of this listing for application hints.

Surface Preparation:

  1. Properly prepare surface according to NWFA approved methods. 
  2. Use a No. 10 grit screen [80 grit for 201 White] for the final sanding cut.
  3. Remove all dust  with a broom and/or vacuum and tack the surface with a clean towel moistened with mineral spirits. 

Application:

  1. Stir or shake material thoroughly before and occasionally during use. Apply a test sample on  a small inconspicuous area before proceeding with the entire job. If desired DuraSeal Penetrating Finish in Neutral can be used to lighten any standard Penetrating Finish color.
  2. Apply the first coat of DuraSeal Penetrating Finish liberally with a brush, lamb wool applicator or cloth at a coverage rate of approximately 500 square feet per gallon.
  3. Allow to penetrate for 5-8 minutes then remove any excess by wiping with rags or by buffing with #2 steel wool. Removal of all excess material is essential to ensure proper try time. 
  4. Ff desired, apply a thin second coat at a coverage rate of approximately 800 square feet per gallon. Allow to penetrate and remove excess material in the same manner as the first coat [step 3 above]. Note: A second coat of DuraSeal Penetrating Finish is not recommended with 350 VOC compliant material .
  5. Allow the final coat to dry at least 8 hours [for best results overnight] and apply a finish coat of your choice. Note: for heavy traffic commercial applications, it is recommended that DuraSeal Penetrating Finish be used without a finish coat., and periodically maintained with DuraSeal Renovator Cleaner and Reconditioner.

Dry Time and Cure:

  • This product takes approximately 8 hours to overnight to dry. Note: Drying time will be increased  by high humidity, low temperature, lack of air movement or incomplete removal of excess stain. 

Maintenance:

  • Regularly remove dust  and dirt by sweeping or vacuuming. Periodic buffing will renew luster. Exceptionally worn areas may require an additional finish coat. Maintained floors sealed only with DuraSeal Penetrating Finish with DuraSeal Renovator Cleaner and Reconditioner.
Materials Check-list:

To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Listed below are a few recommended tools.

(MSDS)

(PDS)

(California Prop 65 Labeling Requirements)

Click the link below to see a short video of this product in use and for some ideas for how to get the best results. 

DuraSeal Penetrating Stain - Natural Gallon

Manufacturer: DuraSeal
Product ID: 812000000
Price: $33.99
QTY Add to cart

DuraSeal Penetrating Finish

Natural Gallon

DuraSeal Penetrating Finish is a semi-transparent stain. This product is formulated to seal, color and provide exceptional durability when used on bare wood and masonry surfaces. This rich blend of oil and resin gives hardwood floors a soft, satiny sheen. DuraSeal Penetrating Finish creates a bond with the wood that won't scratch or wear away. This product can be used with or without a finish coat. 

Materials Check-list:
  • To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Please click the "Materials" tab  to locate the materials check-list for a list of the recommended  tools.

Color:

  • DuraSeal Penetrating Finish gives hardwood floors a soft, satiny sheen. 

Coverage:

  • DuraSeal Penetrating Finish covers approximately 500 square feet per gallon. While a second coat is optional, this product will cover approximately 800 square feet per gallon. A second coat is not recommended when using  350 VOC  compliant material. 

Dry Time and Cure:

  • This product takes approximately 8 hours to overnight to dry. Note: Drying time will be increased  by high humidity, low temperature, lack of air movement or incomplete removal of excess stain. 

Clean-up:

  • Clean equipment using paint thinner, turpentine or mineral spirits. 

Storage:

  • Always store at room temperature. If stored at high temperature, cool to room temperature before use. Keep from freezing. 

Application Hints:

  • Read the "HOW TO" tab of this listing for application hints.

Surface Preparation:

  1. Properly prepare surface according to NWFA approved methods. 
  2. Use a No. 10 grit screen [80 grit for 201 White] for the final sanding cut.
  3. Remove all dust  with a broom and/or vacuum and tack the surface with a clean towel moistened with mineral spirits. 

Application:

  1. Stir or shake material thoroughly before and occasionally during use. Apply a test sample on  a small inconspicuous area before proceeding with the entire job. If desired DuraSeal Penetrating Finish in Neutral can be used to lighten any standard Penetrating Finish color.
  2. Apply the first coat of DuraSeal Penetrating Finish liberally with a brush, lamb wool applicator or cloth at a coverage rate of approximately 500 square feet per gallon.
  3. Allow to penetrate for 5-8 minutes then remove any excess by wiping with rags or by buffing with #2 steel wool. Removal of all excess material is essential to ensure proper try time. 
  4. Ff desired, apply a thin second coat at a coverage rate of approximately 800 square feet per gallon. Allow to penetrate and remove excess material in the same manner as the first coat [step 3 above]. Note: A second coat of DuraSeal Penetrating Finish is not recommended with 350 VOC compliant material .
  5. Allow the final coat to dry at least 8 hours [for best results overnight] and apply a finish coat of your choice. Note: for heavy traffic commercial applications, it is recommended that DuraSeal Penetrating Finish be used without a finish coat., and periodically maintained with DuraSeal Renovator Cleaner and Reconditioner.

Dry Time and Cure:

  • This product takes approximately 8 hours to overnight to dry. Note: Drying time will be increased  by high humidity, low temperature, lack of air movement or incomplete removal of excess stain. 

Maintenance:

  • Regularly remove dust  and dirt by sweeping or vacuuming. Periodic buffing will renew luster. Exceptionally worn areas may require an additional finish coat. Maintained floors sealed only with DuraSeal Penetrating Finish with DuraSeal Renovator Cleaner and Reconditioner.
Materials Check-list:

To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Listed below are a few recommended tools.

(MSDS)

(PDS)

(California Prop 65 Labeling Requirements)

Click the link below to see a short video of this product in use and for some ideas for how to get the best results. 

DuraSeal Penetrating Stain - Neutral Gallon

Manufacturer: DuraSeal
Product ID: 812100000
Price: $33.99
QTY Add to cart

DuraSeal Penetrating Finish

Neutral- 1 Gallon

DuraSeal Penetrating Finish is a semi-transparent stain. This product is formulated to seal, color and provide exceptional durability when used on bare wood and masonry surfaces. This rich blend of oil and resin gives hardwood floors a soft, satiny sheen. DuraSeal Penetrating Finish creates a bond with the wood that won't scratch or wear away. This product can be used with or without a finish coat. 

Materials Check-list:
  • To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Please click the "Materials" tab  to locate the materials check-list for a list of the recommended  tools.

Color:

  • DuraSeal Penetrating Finish gives hardwood floors a soft, satiny sheen. 

Coverage:

  • DuraSeal Penetrating Finish covers approximately 500 square feet per gallon. While a second coat is optional, this product will cover approximately 800 square feet per gallon. A second coat is not recommended when using  350 VOC  compliant material. 

Dry Time and Cure:

  • This product takes approximately 8 hours to overnight to dry. Note: Drying time will be increased  by high humidity, low temperature, lack of air movement or incomplete removal of excess stain. 

Clean-up:

  • Clean equipment using paint thinner, turpentine or mineral spirits. 

Storage:

  • Always store at room temperature. If stored at high temperature, cool to room temperature before use. Keep from freezing. 

Application Hints:

  • Read the "HOW TO" tab of this listing for application hints.

Surface Preparation:

  1. Properly prepare surface according to NWFA approved methods. 
  2. Use a No. 10 grit screen [80 grit for 201 White] for the final sanding cut.
  3. Remove all dust  with a broom and/or vacuum and tack the surface with a clean towel moistened with mineral spirits. 

Application:

  1. Stir or shake material thoroughly before and occasionally during use. Apply a test sample on  a small inconspicuous area before proceeding with the entire job. If desired DuraSeal Penetrating Finish in Neutral can be used to lighten any standard Penetrating Finish color.
  2. Apply the first coat of DuraSeal Penetrating Finish liberally with a brush, lamb wool applicator or cloth at a coverage rate of approximately 500 square feet per gallon.
  3. Allow to penetrate for 5-8 minutes then remove any excess by wiping with rags or by buffing with #2 steel wool. Removal of all excess material is essential to ensure proper try time. 
  4. Ff desired, apply a thin second coat at a coverage rate of approximately 800 square feet per gallon. Allow to penetrate and remove excess material in the same manner as the first coat [step 3 above]. Note: A second coat of DuraSeal Penetrating Finish is not recommended with 350 VOC compliant material .
  5. Allow the final coat to dry at least 8 hours [for best results overnight] and apply a finish coat of your choice. Note: for heavy traffic commercial applications, it is recommended that DuraSeal Penetrating Finish be used without a finish coat., and periodically maintained with DuraSeal Renovator Cleaner and Reconditioner.

Dry Time and Cure:

  • This product takes approximately 8 hours to overnight to dry. Note: Drying time will be increased  by high humidity, low temperature, lack of air movement or incomplete removal of excess stain. 

Maintenance:

  • Regularly remove dust  and dirt by sweeping or vacuuming. Periodic buffing will renew luster. Exceptionally worn areas may require an additional finish coat. Maintained floors sealed only with DuraSeal Penetrating Finish with DuraSeal Renovator Cleaner and Reconditioner.
Materials Check-list:

To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Listed below are a few recommended tools.

(MSDS)

(PDS)

(California Prop 65 Labeling Requirements)

Click the link below to see a short video of this product in use and for some ideas for how to get the best results. 

DuraSeal Penetrating Stain - Nutmeg Gallon

Manufacturer: DuraSeal
Product ID: 812020000
Price: $33.99
QTY Add to cart

DuraSeal Penetrating Finish

Nutmeg Gallon

DuraSeal Penetrating Finish is a semi-transparent stain. This product is formulated to seal, color and provide exceptional durability when used on bare wood and masonry surfaces. This rich blend of oil and resin gives hardwood floors a soft, satiny sheen. DuraSeal Penetrating Finish creates a bond with the wood that won't scratch or wear away. This product can be used with or without a finish coat. 

Materials Check-list:
  • To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Please click the "Materials" tab  to locate the materials check-list for a list of the recommended  tools.

Color:

  • DuraSeal Penetrating Finish gives hardwood floors a soft, satiny sheen. 

Coverage:

  • DuraSeal Penetrating Finish covers approximately 500 square feet per gallon. While a second coat is optional, this product will cover approximately 800 square feet per gallon. A second coat is not recommended when using  350 VOC  compliant material. 

Dry Time and Cure:

  • This product takes approximately 8 hours to overnight to dry. Note: Drying time will be increased  by high humidity, low temperature, lack of air movement or incomplete removal of excess stain. 

Clean-up:

  • Clean equipment using paint thinner, turpentine or mineral spirits. 

Storage:

  • Always store at room temperature. If stored at high temperature, cool to room temperature before use. Keep from freezing. 

Application Hints:

  • Read the "HOW TO" tab of this listing for application hints.

Surface Preparation:

  1. Properly prepare surface according to NWFA approved methods. 
  2. Use a No. 10 grit screen [80 grit for 201 White] for the final sanding cut.
  3. Remove all dust  with a broom and/or vacuum and tack the surface with a clean towel moistened with mineral spirits. 

Application:

  1. Stir or shake material thoroughly before and occasionally during use. Apply a test sample on  a small inconspicuous area before proceeding with the entire job. If desired DuraSeal Penetrating Finish in Neutral can be used to lighten any standard Penetrating Finish color.
  2. Apply the first coat of DuraSeal Penetrating Finish liberally with a brush, lamb wool applicator or cloth at a coverage rate of approximately 500 square feet per gallon.
  3. Allow to penetrate for 5-8 minutes then remove any excess by wiping with rags or by buffing with #2 steel wool. Removal of all excess material is essential to ensure proper try time. 
  4. Ff desired, apply a thin second coat at a coverage rate of approximately 800 square feet per gallon. Allow to penetrate and remove excess material in the same manner as the first coat [step 3 above]. Note: A second coat of DuraSeal Penetrating Finish is not recommended with 350 VOC compliant material .
  5. Allow the final coat to dry at least 8 hours [for best results overnight] and apply a finish coat of your choice. Note: for heavy traffic commercial applications, it is recommended that DuraSeal Penetrating Finish be used without a finish coat., and periodically maintained with DuraSeal Renovator Cleaner and Reconditioner.

Dry Time and Cure:

  • This product takes approximately 8 hours to overnight to dry. Note: Drying time will be increased  by high humidity, low temperature, lack of air movement or incomplete removal of excess stain. 

Maintenance:

  • Regularly remove dust  and dirt by sweeping or vacuuming. Periodic buffing will renew luster. Exceptionally worn areas may require an additional finish coat. Maintained floors sealed only with DuraSeal Penetrating Finish with DuraSeal Renovator Cleaner and Reconditioner.
Materials Check-list:

To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Listed below are a few recommended tools.

(MSDS)

(PDS)

(California Prop 65 Labeling Requirements)

Click the link below to see a short video of this product in use and for some ideas for how to get the best results. 

DuraSeal Penetrating Stain - Rosewood Gallon

Manufacturer: DuraSeal
Product ID: 812390000
Price: $33.99
QTY Add to cart

DuraSeal Penetrating Finish

Rosewood Gallon

DuraSeal Penetrating Finish is a semi-transparent stain. This product is formulated to seal, color and provide exceptional durability when used on bare wood and masonry surfaces. This rich blend of oil and resin gives hardwood floors a soft, satiny sheen. DuraSeal Penetrating Finish creates a bond with the wood that won't scratch or wear away. This product can be used with or without a finish coat. 

Materials Check-list:
  • To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Please click the "Materials" tab  to locate the materials check-list for a list of the recommended  tools.

Color:

  • DuraSeal Penetrating Finish gives hardwood floors a soft, satiny sheen. 

Coverage:

  • DuraSeal Penetrating Finish covers approximately 500 square feet per gallon. While a second coat is optional, this product will cover approximately 800 square feet per gallon. A second coat is not recommended when using  350 VOC  compliant material. 

Dry Time and Cure:

  • This product takes approximately 8 hours to overnight to dry. Note: Drying time will be increased  by high humidity, low temperature, lack of air movement or incomplete removal of excess stain. 

Clean-up:

  • Clean equipment using paint thinner, turpentine or mineral spirits. 

Storage:

  • Always store at room temperature. If stored at high temperature, cool to room temperature before use. Keep from freezing. 

Application Hints:

  • Read the "HOW TO" tab of this listing for application hints.

Surface Preparation:

  1. Properly prepare surface according to NWFA approved methods. 
  2. Use a No. 10 grit screen [80 grit for 201 White] for the final sanding cut.
  3. Remove all dust  with a broom and/or vacuum and tack the surface with a clean towel moistened with mineral spirits. 

Application:

  1. Stir or shake material thoroughly before and occasionally during use. Apply a test sample on  a small inconspicuous area before proceeding with the entire job. If desired DuraSeal Penetrating Finish in Neutral can be used to lighten any standard Penetrating Finish color.
  2. Apply the first coat of DuraSeal Penetrating Finish liberally with a brush, lamb wool applicator or cloth at a coverage rate of approximately 500 square feet per gallon.
  3. Allow to penetrate for 5-8 minutes then remove any excess by wiping with rags or by buffing with #2 steel wool. Removal of all excess material is essential to ensure proper try time. 
  4. Ff desired, apply a thin second coat at a coverage rate of approximately 800 square feet per gallon. Allow to penetrate and remove excess material in the same manner as the first coat [step 3 above]. Note: A second coat of DuraSeal Penetrating Finish is not recommended with 350 VOC compliant material .
  5. Allow the final coat to dry at least 8 hours [for best results overnight] and apply a finish coat of your choice. Note: for heavy traffic commercial applications, it is recommended that DuraSeal Penetrating Finish be used without a finish coat., and periodically maintained with DuraSeal Renovator Cleaner and Reconditioner.

Dry Time and Cure:

  • This product takes approximately 8 hours to overnight to dry. Note: Drying time will be increased  by high humidity, low temperature, lack of air movement or incomplete removal of excess stain. 

Maintenance:

  • Regularly remove dust  and dirt by sweeping or vacuuming. Periodic buffing will renew luster. Exceptionally worn areas may require an additional finish coat. Maintained floors sealed only with DuraSeal Penetrating Finish with DuraSeal Renovator Cleaner and Reconditioner.
Materials Check-list:

To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Listed below are a few recommended tools.

(MSDS)

(PDS)

(California Prop 65 Labeling Requirements)

Click the link below to see a short video of this product in use and for some ideas for how to get the best results. 

DuraSeal Penetrating Stain - Royal Mahogany Gallon

Manufacturer: DuraSeal
Product ID: 812080000
Price: $33.99
QTY Add to cart

DuraSeal Penetrating Finish

Royal Mahogany Gallon

DuraSeal Penetrating Finish is a semi-transparent stain. This product is formulated to seal, color and provide exceptional durability when used on bare wood and masonry surfaces. This rich blend of oil and resin gives hardwood floors a soft, satiny sheen. DuraSeal Penetrating Finish creates a bond with the wood that won't scratch or wear away. This product can be used with or without a finish coat. 

Materials Check-list:
  • To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Please click the "Materials" tab  to locate the materials check-list for a list of the recommended  tools.

Color:

  • DuraSeal Penetrating Finish gives hardwood floors a soft, satiny sheen. 

Coverage:

  • DuraSeal Penetrating Finish covers approximately 500 square feet per gallon. While a second coat is optional, this product will cover approximately 800 square feet per gallon. A second coat is not recommended when using  350 VOC  compliant material. 

Dry Time and Cure:

  • This product takes approximately 8 hours to overnight to dry. Note: Drying time will be increased  by high humidity, low temperature, lack of air movement or incomplete removal of excess stain. 

Clean-up:

  • Clean equipment using paint thinner, turpentine or mineral spirits. 

Storage:

  • Always store at room temperature. If stored at high temperature, cool to room temperature before use. Keep from freezing. 

Application Hints:

  • Read the "HOW TO" tab of this listing for application hints.

Surface Preparation:

  1. Properly prepare surface according to NWFA approved methods. 
  2. Use a No. 10 grit screen [80 grit for 201 White] for the final sanding cut.
  3. Remove all dust  with a broom and/or vacuum and tack the surface with a clean towel moistened with mineral spirits. 

Application:

  1. Stir or shake material thoroughly before and occasionally during use. Apply a test sample on  a small inconspicuous area before proceeding with the entire job. If desired DuraSeal Penetrating Finish in Neutral can be used to lighten any standard Penetrating Finish color.
  2. Apply the first coat of DuraSeal Penetrating Finish liberally with a brush, lamb wool applicator or cloth at a coverage rate of approximately 500 square feet per gallon.
  3. Allow to penetrate for 5-8 minutes then remove any excess by wiping with rags or by buffing with #2 steel wool. Removal of all excess material is essential to ensure proper try time. 
  4. Ff desired, apply a thin second coat at a coverage rate of approximately 800 square feet per gallon. Allow to penetrate and remove excess material in the same manner as the first coat [step 3 above]. Note: A second coat of DuraSeal Penetrating Finish is not recommended with 350 VOC compliant material .
  5. Allow the final coat to dry at least 8 hours [for best results overnight] and apply a finish coat of your choice. Note: for heavy traffic commercial applications, it is recommended that DuraSeal Penetrating Finish be used without a finish coat., and periodically maintained with DuraSeal Renovator Cleaner and Reconditioner.

Dry Time and Cure:

  • This product takes approximately 8 hours to overnight to dry. Note: Drying time will be increased  by high humidity, low temperature, lack of air movement or incomplete removal of excess stain. 

Maintenance:

  • Regularly remove dust  and dirt by sweeping or vacuuming. Periodic buffing will renew luster. Exceptionally worn areas may require an additional finish coat. Maintained floors sealed only with DuraSeal Penetrating Finish with DuraSeal Renovator Cleaner and Reconditioner.
Materials Check-list:

To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Listed below are a few recommended tools.

(MSDS)

(PDS)

(California Prop 65 Labeling Requirements)

Click the link below to see a short video of this product in use and for some ideas for how to get the best results. 

DuraSeal Penetrating Stain - Sedona Red Gallon

Manufacturer: DuraSeal
Product ID: 812430000
Price: $33.99
QTY Add to cart

DuraSeal Penetrating Finish

Sedona Red Gallon

DuraSeal Penetrating Finish is a semi-transparent stain. This product is formulated to seal, color and provide exceptional durability when used on bare wood and masonry surfaces. This rich blend of oil and resin gives hardwood floors a soft, satiny sheen. DuraSeal Penetrating Finish creates a bond with the wood that won't scratch or wear away. This product can be used with or without a finish coat. 

Materials Check-list:
  • To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Please click the "Materials" tab  to locate the materials check-list for a list of the recommended  tools.

Color:

  • DuraSeal Penetrating Finish gives hardwood floors a soft, satiny sheen. 

Coverage:

  • DuraSeal Penetrating Finish covers approximately 500 square feet per gallon. While a second coat is optional, this product will gover approximately 800 square feet per gallon. A second coat is not recommended when using  350 VOC  compliant material. 

Dry Time and Cure:

  • This product takes approximately 8 hours to overnight to dry. Note: Drying time will be increased  by high humidity, low temperature, lack of air movement or incomplete removal of excess stain. 

Clean-up:

  • Clean equipment using paint thinner, turpentine or mineral spirits. 

Storage:

  • Always store at room temperature. If stored at high temperature, cool to room temperature before use. Keep from freezing. 

Application Hints:

  • Read the "HOW TO" tab of this listing for application hints.

Surface Preparation:

  1. Properly prepare surface according to NWFA approved methods. 
  2. Use a No. 10 grit screen [80 grit for 201 White] for the final sanding cut.
  3. Remove all dust  with a broom and/or vacuum and tack the surface with a clean towel moistened with mineral spirits. 

Application:

  1. Stir or shake material thoroughly before and occasionally during use. Apply a test sample on  a small inconspicuous area before proceeding with the entire job. If desired DuraSeal Penetrating Finish in Neutral can be used to lighten any standard Penetrating Finish color.
  2. Apply the first coat of DuraSeal Penetrating Finish liberally with a brush, lamb wool applicator or cloth at a coverage rate of approximately 500 square feet per gallon.
  3. Allow to penetrate for 5-8 minutes then remove any excess by wiping with rags or by buffing with #2 steel wool. Removal of all excess material is essential to ensure proper try time. 
  4. Ff desired, apply a thin second coat at a coverage rate of approximately 800 square feet per gallon. Allow to penetrate and remove excess material in the same manner as the first coat [step 3 above]. Note: A second coat of DuraSeal Penetrating Finish is not recommended with 350 VOC compliant material .
  5. Allow the final coat to dry at least 8 hours [for best results overnight] and apply a finish coat of your choice. Note: for heavy traffic commercial applications, it is recommended that DuraSeal Penetrating Finish be used without a finish coat., and periodically maintained with DuraSeal Renovator Cleaner and Reconditioner.

Dry Time and Cure:

  • This product takes approximately 8 hours to overnight to dry. Note: Drying time will be increased  by high humidity, low temperature, lack of air movement or incomplete removal of excess stain. 

Maintenance:

  • Regularly remove dust  and dirt by sweeping or vacuuming. Periodic buffing will renew luster. Exceptionally worn areas may require an additional finish coat. Maintained floors sealed only with DuraSeal Penetrating Finish with DuraSeal Renovator Cleaner and Reconditioner.
Materials Check-list:

To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Listed below are a few recommended tools.

(MSDS)

(PDS)

(California Prop 65 Labeling Requirements)

Click the link below to see a short video of this product in use and for some ideas for how to get the best results. 

DuraSeal Penetrating Stain - Spice Brown Gallon

Manufacturer: DuraSeal
Product ID: 812370000
Price: $33.99
QTY Add to cart

DuraSeal Penetrating Finish

Spice Brown Gallon

DuraSeal Penetrating Finish is a semi-transparent stain. This product is formulated to seal, color and provide exceptional durability when used on bare wood and masonry surfaces. This rich blend of oil and resin gives hardwood floors a soft, satiny sheen. DuraSeal Penetrating Finish creates a bond with the wood that won't scratch or wear away. This product can be used with or without a finish coat. 

Materials Check-list:
  • To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Please click the "Materials" tab  to locate the materials check-list for a list of the recommended  tools.

Color:

  • DuraSeal Penetrating Finish gives hardwood floors a soft, satiny sheen. 

Coverage:

  • DuraSeal Penetrating Finish covers approximately 500 square feet per gallon. While a second coat is optional, this product will cover approximately 800 square feet per gallon. A second coat is not recommended when using  350 VOC  compliant material. 

Dry Time and Cure:

  • This product takes approximately 8 hours to overnight to dry. Note: Drying time will be increased  by high humidity, low temperature, lack of air movement or incomplete removal of excess stain. 

Clean-up:

  • Clean equipment using paint thinner, turpentine or mineral spirits. 

Storage:

  • Always store at room temperature. If stored at high temperature, cool to room temperature before use. Keep from freezing. 

Application Hints:

  • Read the "HOW TO" tab of this listing for application hints.

Surface Preparation:

  1. Properly prepare surface according to NWFA approved methods. 
  2. Use a No. 10 grit screen [80 grit for 201 White] for the final sanding cut.
  3. Remove all dust  with a broom and/or vacuum and tack the surface with a clean towel moistened with mineral spirits. 

Application:

  1. Stir or shake material thoroughly before and occasionally during use. Apply a test sample on  a small inconspicuous area before proceeding with the entire job. If desired DuraSeal Penetrating Finish in Neutral can be used to lighten any standard Penetrating Finish color.
  2. Apply the first coat of DuraSeal Penetrating Finish liberally with a brush, lamb wool applicator or cloth at a coverage rate of approximately 500 square feet per gallon.
  3. Allow to penetrate for 5-8 minutes then remove any excess by wiping with rags or by buffing with #2 steel wool. Removal of all excess material is essential to ensure proper try time. 
  4. Ff desired, apply a thin second coat at a coverage rate of approximately 800 square feet per gallon. Allow to penetrate and remove excess material in the same manner as the first coat [step 3 above]. Note: A second coat of DuraSeal Penetrating Finish is not recommended with 350 VOC compliant material .
  5. Allow the final coat to dry at least 8 hours [for best results overnight] and apply a finish coat of your choice. Note: for heavy traffic commercial applications, it is recommended that DuraSeal Penetrating Finish be used without a finish coat., and periodically maintained with DuraSeal Renovator Cleaner and Reconditioner.

Dry Time and Cure:

  • This product takes approximately 8 hours to overnight to dry. Note: Drying time will be increased  by high humidity, low temperature, lack of air movement or incomplete removal of excess stain. 

Maintenance:

  • Regularly remove dust  and dirt by sweeping or vacuuming. Periodic buffing will renew luster. Exceptionally worn areas may require an additional finish coat. Maintained floors sealed only with DuraSeal Penetrating Finish with DuraSeal Renovator Cleaner and Reconditioner.
Materials Check-list:

To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Listed below are a few recommended tools.

(MSDS)

(PDS)

(California Prop 65 Labeling Requirements)

Click the link below to see a short video of this product in use and for some ideas for how to get the best results.