DuraClear Plus - Satin

Manufacturer: DuraSeal
Product ID: 808100000
Price: $103.30
QTY Add to cart

*DuraClear Plus has been discontinued. We have 4 gallons left in stock.*

DuraSeal DuraClear Plus Floor Finish

Satin- 1 Gallon

DuraSeal DuraClear Plus Floor Finish provides two component durability that is easy to use. This product provides a clear, non-ambering finish. DuraSeal DuraClear Plus Floor Finish also has an extended pot life. 

DuraSeal DuraClear Plus Floor Finish is Greenguard Indoor Air Quality Certified.

Materials Check-list:
  • To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Please click the "Materials" tab  to locate the materials check-list for a list of the recommended  tools.

Color:

  • DuraSeal DuraClear Plus Floor Finish is clear in color and does not amber.

Sealer:

  • When DuraSeal DuraClear Plus Floor Finish is being applied to a newly sanded, bare wood floor, a sealer should be applied before using the DuraSeal DuraClear Plus Floor Finish.  See  the "HOW TO" tab of this listing for more information.

Coverage:

  • Apply DuraSeal DuraClear Plus Floor Finish at 500 sq. ft. per gallon. 

Dry Time and Cure:

  • Recoat time: 2-3 hours between coats. 
  • Light foot traffic is acceptable after 24 hours. 
  • Allow one week before exposing to rugs, cleaners, spills or heavy traffic. 

Between Coat Abrasion:

  • Abrading for additional coats is not required if the finish is applied within 24 hours of the previous coat. However, abrading the floor usually produces a smoother finished result. Abrade the floor lightly with a DuraSeal Pre-Treat pad. Vacuum thoroughly and tack floor with a slightly water-dampened cloth to remove all dust. 

Clean-up:

  • Cleans easily with warm water without the use of mineral spirits.
  • Do not use all-purpose cleaner or degreaser products.
  • Application tools should be cleaned with warm water immediately after use. 

Storage:

  • Always store at room temperature. If accidentally stored at a high temperature, cool to room temperature before use. Keep from freezing. If frozen, slowly warm to room temperature and mix thoroughly before using. 

Greenguard Certified:

  • DuraSeal DuraClear Plus Floor Finish is designed to be used indoors.

Application Hints:

  • Read the "HOW TO" tab of this listing for application hints.

Surface Preparation:

New Natural Floors

Sand and prepare flooring according to NWFA recommended methods. Finish sanding with a 120 or 150 grit screen. Do no use steel wool. Vacuum thoroughly and tack floor with a slightly water-dampened cloth to remove all dust.  Apply 1 coat of DuraSeal DuraClear Sealer and 2 coats of DuraSeal DuraClear Plus Floor Finish. 

Stained Floors

Sand and prepare flooring according to NWFA recommended methods. Finish abrading with a 100 grit pad or equivalent. Do not use steel wool. Apply DuraSeal Penetrating Stain or DuraSeal Quick Coat according to label directions. Apply 2 coats of DuraSeal DuraClear Plus Floor Finish over thoroughly dried stain. 

Previously Finished Floors

Note: Do not apply over wax, lacquer, stains or shellac containing wax or stearates. Be certain floor is free from all wax or oily residue. Clean and abrade flooring using DuraSeal Pre-Treat System. Do not use Steel Wool. Vacuum thoroughly and tack floor with a slightly water-dampened cloth to remove all dust. Apply two coats of DuraSeal DuraClear Plus Floor Finish. DuraSeal DuraClear Plus Floor Finish will adhere to most stains and finishes after proper preparation.   Note: Always prepare a sample or test area to determine compatibility. 

Directions for Adding Crosslinker:

  1. Invert finish bottle approximately 8-10 times before adding the crosslinker. 
  2. Remove cap from the crosslinker bottle- DO NOT BREAK THE SEAL AT THIS TIME.
  3. Place inverted sealed bottle onto the spout and push down until the seal is broken. 
  4. Turn crosslinker bottle approximately 1 revolution and let contents empty into finish.
  5. Remove crosslinker bottle and replace cap and dispose of properly.
  6. Replace finish cap and invert finish container approximately 10 times. See precautionary information below and on crosslinker bottle. Always crosslink before use. Crosslinked material must be used within 48 hours and product needs to be re-crosslinked. Do not re-crosslink more than1 time.  Do no re-crosslink less than one-half  (1/2) gallon of finish. Product cannot be re-crosslinked past 48 hours from the initial time crosslinker was added. 

Application:

Be certain all materials are at room temperature. Use a synthetic T-bar applicator to provide the smoothest finish. Best results are are achieved when ambient temperatures are between 50-90 F, and humidity is below 80%. Note: If applying to white oak , two coats of DuraSeal DuraClear Sealer are recommended.

  1.  Pour a 5-6" wide line of finish along the starting wall, going with the grain of the wood.
  2. Using a clean dampened applicator, draw the finish towards the opposite wall going with the grain of the wood. Holding the applicator at a "snowplow" angle will maintain a wet edge at all times.
  3. As you approach the edge of the run, turn the applicator toward you and pad out excess material parallel to the wet edge.
  4. Feather out all turns.
  5. Apply DuraSeal DuraClear Plus Floor Finish at 500 Sq. ft. per gallon to achieve proper film build and to prevent lapping and applicator marks.
  6. Allow first coat to dry 2-3 hours. Note: Extended dry time is required with high humidity and low temperature conditions. 
  7. Abrade floor lightly with a DuraSeal Pre-Treat pad. Vacuum thoroughly and tack floor with a slightly water dampened cloth to remove all dust. Abrading for additional coats is not required  if the finish is applied within 24 hours of the previous coat. 

Dry Time and Cure:

  • Recoat time: 2-3 hours between coats. 
  • Light foot traffic is acceptable after 24 hours. 
  • Allow one week before exposing to rugs, cleaners,spills or heavy traffic. 

Maintenance: 

Use walk-off mats at all entrance doorways to keep dirt and grit to a minimum. Sweep or vacuum daily and damp wipe as needed with DuraSeal Hardwood Floor Cleaner. Do not use all-purpose cleaner/degreaser products.

Materials Check-list:

To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Listed below are a few recommended tools.

(MSDS)

(PDS)

(California Prop 65 Labeling Requirements)

Click the link below to see a short video of this product in use and for some ideas for how to get the best results. 

DuraClear Plus - Semi-Gloss

Manufacturer: DuraSeal
Product ID: 808050000
Price: $103.30
QTY Add to cart

*DuraClear Plus has been discontinued. We have 10 gallons left in stock.*

DuraSeal DuraClear Plus Floor Finish

Semi-Gloss- 1 Gallon

DuraSeal DuraClear Plus Floor Finish provides two component durability that is easy to use. This product provides a clear, non-ambering finish. DuraSeal DuraClear Plus Floor Finish also has an extended pot life. 

DuraSeal DuraClear Plus Floor Finish is Greenguard Indoor Air Quality Certified.

Materials Check-list:
  • To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Please click the "Materials" tab  to locate the materials check-list for a list of the recommended  tools.

Color:

  • DuraSeal DuraClear Plus Floor Finish is clear in color and does not amber.

Sealer:

  • When DuraSeal DuraClear Plus Floor Finish is being applied to a newly sanded, bare wood floor, a sealer should be applied before using the DuraSeal DuraClear Plus Floor Finish.  See  the "HOW TO" tab of this listing for more information.

Coverage:

  • Apply DuraSeal DuraClear Plus Floor Finish at 500 sq. ft. per gallon. 

Dry Time and Cure:

  • Recoat time: 2-3 hours between coats. 
  • Light foot traffic is acceptable after 24 hours. 
  • Allow one week before exposing to rugs, cleaners, spills or heavy traffic. 

Between Coat Abrasion:

  • Abrading for additional coats is not required if the finish is applied within 24 hours of the previous coat. However, abrading the floor usually produces a smoother finished result. Abrade the floor lightly with a DuraSeal Pre-Treat pad. Vacuum thoroughly and tack floor with a slightly water-dampened cloth to remove all dust. 

Clean-up:

  • Cleans easily with warm water without the use of mineral spirits.
  • Do not use all-purpose cleaner or degreaser products.
  • Application tools should be cleaned with warm water immediately after use. 

Storage:

  • Always store at room temperature. If accidentally stored at a high temperature, cool to room temperature before use. Keep from freezing. If frozen, slowly warm to room temperature and mix thoroughly before using. 

Greenguard Certified:

  • DuraSeal DuraClear Plus Floor Finish is designed to be used indoors.

Application Hints:

  • Read the "HOW TO" tab of this listing for application hints.

Surface Preparation:

New Natural Floors

Sand and prepare flooring according to NWFA recommended methods. Finish sanding with a 120 or 150 grit screen. Do no use steel wool. Vacuum thoroughly and tack floor with a slightly water-dampened cloth to remove all dust.  Apply 1 coat of DuraSeal DuraClear Sealer and 2 coats of DuraSeal DuraClear Plus Floor Finish. 

Stained Floors

Sand and prepare flooring according to NWFA recommended methods. Finish abrading with a 100 grit pad or equivalent. Do not use steel wool. Apply DuraSeal Penetrating Stain or DuraSeal Quick Coat according to label directions. Apply 2 coats of DuraSeal DuraClear Plus Floor Finish over thoroughly dried stain. 

Previously Finished Floors

Note: Do not apply over wax, lacquer, stains or shellac containing wax or stearates. Be certain floor is free from all wax or oily residue. Clean and abrade flooring using DuraSeal Pre-Treat System. Do not use Steel Wool. Vacuum thoroughly and tack floor with a slightly water-dampened cloth to remove all dust. Apply two coats of DuraSeal DuraClear Plus Floor Finish. DuraSeal DuraClear Plus Floor Finish will adhere to most stains and finishes after proper preparation.   Note: Always prepare a sample or test area to determine compatibility. 

Directions for Adding Crosslinker:

  1. Invert finish bottle approximately 8-10 times before adding the crosslinker. 
  2. Remove cap from the crosslinker bottle- DO NOT BREAK THE SEAL AT THIS TIME.
  3. Place inverted sealed bottle onto the spout and push down until the seal is broken. 
  4. Turn crosslinker bottle approximately 1 revolution and let contents empty into finish.
  5. Remove crosslinker bottle and replace cap and dispose of properly.
  6. Replace finish cap and invert finish container approximately 10 times. See precautionary information below and on crosslinker bottle. Always crosslink before use. Crosslinked material must be used within 48 hours and product needs to be re-crosslinked. Do not re-crosslink more than1 time.  Do no re-crosslink less than one-half  (1/2) gallon of finish. Product cannot be re-crosslinked past 48 hours from the initial time crosslinker was added. 

Application:

Be certain all materials are at room temperature. Use a synthetic T-bar applicator to provide the smoothest finish. Best results are are achieved when ambient temperatures are between 50-90 F, and humidity is below 80%. Note: If applying to white oak , two coats of DuraSeal DuraClear Sealer are recommended.

  1.  Pour a 5-6" wide line of finish along the starting wall, going with the grain of the wood.
  2. Using a clean dampened applicator, draw the finish towards the opposite wall going with the grain of the wood. Holding the applicator at a "snowplow" angle will maintain a wet edge at all times.
  3. As you approach the edge of the run, turn the applicator toward you and pad out excess material parallel to the wet edge.
  4. Feather out all turns.
  5. Apply DuraSeal DuraClear Plus Floor Finish at 500 Sq. ft. per gallon to achieve proper film build and to prevent lapping and applicator marks.
  6. Allow first coat to dry 2-3 hours. Note: Extended dry time is required with high humidity and low temperature conditions. 
  7. Abrade floor lightly with a DuraSeal Pre-Treat pad. Vacuum thoroughly and tack floor with a slightly water dampened cloth to remove all dust. Abrading for additional coats is not required  if the finish is applied within 24 hours of the previous coat. 

Dry Time and Cure:

  • Recoat time: 2-3 hours between coats. 
  • Light foot traffic is acceptable after 24 hours. 
  • Allow one week before exposing to rugs, cleaners,spills or heavy traffic. 

Maintenance: 

Use walk-off mats at all entrance doorways to keep dirt and grit to a minimum. Sweep or vacuum daily and damp wipe as needed with DuraSeal Hardwood Floor Cleaner. Do not use all-purpose cleaner/degreaser products.

Materials Check-list:

To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Listed below are a few recommended tools.

(MSDS)

(PDS)

(California Prop 65 Labeling Requirements)

Click the link below to see a short video of this product in use and for some ideas for how to get the best results.