JL-2000W-CS

Manufacturer: Not Available
Product ID: JL-2000W-CS
Price:
QTY Add to cart

JL-2000W-CS

The JL-2000 leather moisture meter is the perfect quality control tool for tanneries everywhere. Don’t leave the quality of your product to chance. Check moisture content with the JL-2000 leather moisture meter.

  • Bright, clear digital display.
  • Averages up to 100 readings.
  • Moisture Range: 10%-28% on leather.
  • Built-in calibration check.
  • Integral contact pins mounted on top of meter provide 5/16” penetration.
  • Built-in connector accepts any Delmhorst electrode.
  • Size: 8” x 3” x 1 5/8”.
  • Weight: 10 oz.
  • Rugged construction ensures years of reliable use.
  • Sturdy plastic carrying case.
  • 9V battery.
  • 1-year warranty.
ELECTRODES
Delmhorst offers a wide assortment of electrodes known throughout the industry for their durability. All Delmhorst electrodes fit any Delmhorst moisture meter. Below are electrodes that are typically used for this model:
4-E

Comes with 4 uninsulated 2497/A-100 contact pins for 5/16" penetration. Useful for:

  • Dry-kiln operators: Use on kiln-dried boards up to 2" and on air-dried boards up to 5/4.
  • Leather producers: Use for tough leather.

Can also be fitted with A-103 uninsulated pins with 1 3/32” length and 11/16” penetration.

ACCESSORIES

2497/A-100
Uninsulated pin and retainer with 5/16" penetration. Standard on all meters with built-in pins and the 2-E and 4-E electrodes. Used on wood up to 6/4 (1 ½”), concrete and gypsum.
MCS-JL-2000

This moisture content standard is great for verifying that your JL-2000 leather moisture meter is in calibration. With two electrical resistance values (13% and 21%) to test your meter against, you can be sure that your readings will stand up to the strictest standards of accuracy. The MCS-JL-2000 is also available with a letter of certification traceable to NIST.

MTX-C-PKG

Manufacturer: Not Available
Product ID: MTX-C-PKG
Price:
QTY Add to cart

MTX-C-PKG

The Delmhorst Moisture Transmitters measure moisture in wood or other hygroscopic materials in conjunction with any Delmhorst electrode and generate either a current (MTX-C) or voltage output (MTX-V). The transmitters do not have a display. They use a 4-wire transmission method. DC voltage is brought powers the unit by a separate wire from the wire used to carry the voltage or current output.

The transmitters are ideally suited for applications requiring continuous monitoring of moisture in hygroscopic materials and interfacing the sensor to a data logger or a computer. The transmitters are housed in an ABS wall-mounted case for easy mounting near the sensor or in a control room. 

Contact our customer service team to determine if the MTX can be calibrated to your specific wood species or other product. 

  • Moisture range - 6% - 60% wood (Douglas Fir)
  • One input
  • D.C. current 4 to 20mA or Voltage 1-5 VDC, or 0-2VDC
  • Power supply with D.C. voltage between 15 - 30 volts
  • Minimum supply current of 500mA
  • Operating temperature range of 32F - 158F / 0C - 70C
  • Dimensions - 3.25" X 3.25" X 1.25" (Mounting base 4.25" X 3.295")
  • Terminals - 2.5 mm (Center Positive) power jack for Power Input, Terminal Strip, and UHF connector for Moisture Input
ELECTRODES
Delmhorst offers a wide assortment of electrodes known throughout the industry for their durability. All Delmhorst electrodes fit the MTX. The Delmhorst electrode to use varies depending on each application. Below are electrodes that are typically used for this model:
2-E/H

The 2-E/H is a compact electrode great for long-term monitoring of wood, drywall, and paper cores. This electrode connects directly to the MTX and comes equipped standard with 5/16” pins and a 10’ cable.

315CAB-0020
The 315CAB-0020, when used with optional contact pins, is a great solution for long-term monitoring of wood. This cable connects directly to the MTX using the terminal connection on the MTX.

With pins that are insulated except at the tip, you can obtain core readings which provide a true indication of moisture content at a known depth.

*The 3015CAB-0020 is available in 10', 15', 20', 25', 30', 50', 75', and 100' lengths. Please specify required length based on your application.

**Pins show are part # 309PIN-0042, and are available with 1/2" penetration for up to 5/4" stock, 1" penetration for up to 10/4" stock, and 1-3/4" penetration for up to 5" stock.

No accessories are needed with the MTX

MTX-V-PKG

Manufacturer: Not Available
Product ID: MTX-V-PKG
Price:
QTY Add to cart

MTX-V-PKG

The Delmhorst Moisture Transmitters measure moisture in wood or other hygroscopic materials in conjunction with any Delmhorst electrode and generate either a current (MTX-C) or voltage output (MTX-V). The transmitters do not have a display. They use a 4-wire transmission method. DC voltage is brought powers the unit by a separate wire from the wire used to carry the voltage or current output.

The transmitters are ideally suited for applications requiring continuous monitoring of moisture in hygroscopic materials and interfacing the sensor to a data logger or a computer. The transmitters are housed in an ABS wall-mounted case for easy mounting near the sensor or in a control room. 

Contact our customer service team to determine if the MTX can be calibrated to your specific wood species or other product. 

  • Moisture range - 6% - 60% wood (Douglas Fir)
  • One input
  • D.C. current 4 to 20mA or Voltage 1-5 VDC, or 0-2VDC
  • Power supply with D.C. voltage between 15 - 30 volts
  • Minimum supply current of 500mA
  • Operating temperature range of 32F - 158F / 0C - 70C
  • Dimensions - 3.25" X 3.25" X 1.25" (Mounting base 4.25" X 3.295")
  • Terminals - 2.5 mm (Center Positive) power jack for Power Input, Terminal Strip, and UHF connector for Moisture Input
ELECTRODES
Delmhorst offers a wide assortment of electrodes known throughout the industry for their durability. All Delmhorst electrodes fit the MTX. The Delmhorst electrode to use varies depending on each application. Below are electrodes that are typically used for this model:
2-E/H

The 2-E/H is a compact electrode great for long-term monitoring of wood, drywall, and paper cores. This electrode connects directly to the MTX and comes equipped standard with 5/16” pins and a 10’ cable.

315CAB-0020
The 315CAB-0020, when used with optional contact pins, is a great solution for long-term monitoring of wood. This cable connects directly to the MTX using the terminal connection on the MTX.

With pins that are insulated except at the tip, you can obtain core readings which provide a true indication of moisture content at a known depth.

*The 3015CAB-0020 is available in 10', 15', 20', 25', 30', 50', 75', and 100' lengths. Please specify required length based on your application.

**Pins show are part # 309PIN-0042, and are available with 1/2" penetration for up to 5/4" stock, 1" penetration for up to 10/4" stock, and 1-3/4" penetration for up to 5" stock.

No accessories are needed with the MTX

P-2000W-CS

Manufacturer: Not Available
Product ID: P-2000W-CS
Price:
QTY Add to cart

P-2000W-CS

The P-2000 is an electrical resistance-type moisture meter, utilizing the relationship between moisture content and electrical resistance. The contact pins mounted on the top of the meter are used for making direct contact with the material. Various external electrodes are also available for specific applications. The P-2000 is especially useful for testing paperboard, corrugated stock, and paper tubes. It is ideal for plant superintendents, inspectors, buyers, and salespeople.

  • Bright, clear digital display.
  • Three scales:
    • 4.3%-18% MC for paper.
    • 5%-40%, for baled scrap paper.
    • 0 - 100 arbitrary scale, for obtaining relative moisture indications on other material.
  • Built-in calibration check.
  • Averages up to 100 accumulated readings.
  • Audible, adjustable alarm alerts you when your pre-selected MC has been reached.
  • Integral contact pins mounted on top of meter provide 5/16” penetration.
  • Built-in connector accepts any Delmhorst electrode.
  • Size: 8” x 3” x 1 5/8”.
  • Weight: 10 oz.
  • Rugged construction ensures years of reliable use.
  • Sturdy plastic carrying case.
  • 9V battery.
  • 1-year warranty
ELECTRODES
Delmhorst offers a wide assortment of electrodes known throughout the industry for their durability. All Delmhorst electrodes fit any Delmhorst moisture meter. Below are electrodes that are typically used for this model:
12-E

Double roller type for measuring moisture content on a moving web.

15-E

Pin type, with two rows of four pins each, maximum penetration 1/8". Penetration can be adjusted according to stock thickness by means of gauge block.

19-E

Blade type electrode for measuring of paper on skids. Blades are 5" long. Longer blades available on special order.

2-E

Fitted with the same 5/16" penetration pins that are mounted on our pin type meters. This electrode is great for a variety of different applications:

  • Home inspector: use on wood joists and drywall.
  • Paper producer: use on curved surfaces such as cardboard and paper tubes.
  • Woodworker: use on timber, poles, and veneer/

2-E is also available as the 2- ET with a tapped handle for hard to reach areas. Can also be fitted with A-103 uninsulated pins with 1 3/32” length and 11/16” penetration.

43-E

Clamp type for testing thin sheet stock. The sample tested is compressed between two smooth discs.

55-E

Leaf type for measuring moisture content on a moving web or roll. Can be used with a portable unit or for stationary installation.

830 Series

Prods for testing standard and high density bales (requires H-4 Handle).

Available as:

  • 830-2 – 10” prod
  • 830-3 – 18” prod
  • 830-4 – 36” prod
  • 830-5 – 12” for hops
H-4 Handle

Electrode handle that attaches to the built-in connector on the top of any moisture meter. Can be used with the 830 series prods, 831 short pin disc shaped prod, and 832 long pin disc shaped prod. This is useful for large or high density bales of hay or scrap paper. Two handed operation is recommended over using a prod that connects directly to the top of the meter (like our 1235 series) to minimize stress placed on the meter casing.

ACCESSORIES

2497/A-100
Uninsulated pin and retainer with 5/16" penetration. Standard on all meters with built-in pins and the 2-E and 4-E electrodes. Used on wood up to 6/4 (1 ½”), concrete and gypsum.
MCS-2

This moisture content standard is great for verifying that your P-2000 or RDM-3P paper moisture meters are in calibration. With two electrical resistance values (6% and 10%) to test your meter against, you can be sure that your readings will stand up to the strictest standards of accuracy. The MCS-2 is also available with a letter of certification traceable to NIST.

Please Note:

For P-2000 meters with serial numbers up to 19389, please order the MCS-2

For P-2000 meters with serial numbers of 19390 and above, please order the MCS-2X.  

P-2000W-CS65

Manufacturer: Not Available
Product ID: P-2000W-CS65
Price:
QTY Add to cart

P-2000W-CS65

The P-2000 is an electrical resistance-type moisture meter, utilizing the relationship between moisture content and electrical resistance. The contact pins mounted on the top of the meter are used for making direct contact with the material. Various external electrodes are also available for specific applications. The P-2000 is especially useful for testing paperboard, corrugated stock, and paper tubes. It is ideal for plant superintendents, inspectors, buyers, and salespeople.

  • Bright, clear digital display.
  • Three scales:
    • 4.3%-18% MC for paper.
    • 5%-40%, for baled scrap paper.
    • 0 - 100 arbitrary scale, for obtaining relative moisture indications on other material.
  • Built-in calibration check.
  • Averages up to 100 accumulated readings.
  • Audible, adjustable alarm alerts you when your pre-selected MC has been reached.
  • Integral contact pins mounted on top of meter provide 5/16” penetration.
  • Built-in connector accepts any Delmhorst electrode.
  • Size: 8” x 3” x 1 5/8”.
  • Weight: 10 oz.
  • Rugged construction ensures years of reliable use.
  • Sturdy plastic carrying case.
  • 9V battery.
  • 1-year warranty
ELECTRODES
Delmhorst offers a wide assortment of electrodes known throughout the industry for their durability. All Delmhorst electrodes fit any Delmhorst moisture meter. Below are electrodes that are typically used for this model:
12-E

Double roller type for measuring moisture content on a moving web.

15-E

Pin type, with two rows of four pins each, maximum penetration 1/8". Penetration can be adjusted according to stock thickness by means of gauge block.

19-E

Blade type electrode for measuring of paper on skids. Blades are 5" long. Longer blades available on special order.

2-E

Fitted with the same 5/16" penetration pins that are mounted on our pin type meters. This electrode is great for a variety of different applications:

  • Home inspector: use on wood joists and drywall.
  • Paper producer: use on curved surfaces such as cardboard and paper tubes.
  • Woodworker: use on timber, poles, and veneer/

2-E is also available as the 2- ET with a tapped handle for hard to reach areas. Can also be fitted with A-103 uninsulated pins with 1 3/32” length and 11/16” penetration.

43-E

Clamp type for testing thin sheet stock. The sample tested is compressed between two smooth discs.

55-E

Leaf type for measuring moisture content on a moving web or roll. Can be used with a portable unit or for stationary installation.

830 Series

Prods for testing standard and high density bales (requires H-4 Handle).

Available as:

  • 830-2 – 10” prod
  • 830-3 – 18” prod
  • 830-4 – 36” prod
  • 830-5 – 12” for hops
H-4 Handle

Electrode handle that attaches to the built-in connector on the top of any moisture meter. Can be used with the 830 series prods, 831 short pin disc shaped prod, and 832 long pin disc shaped prod. This is useful for large or high density bales of hay or scrap paper. Two handed operation is recommended over using a prod that connects directly to the top of the meter (like our 1235 series) to minimize stress placed on the meter casing.

ACCESSORIES

2497/A-100
Uninsulated pin and retainer with 5/16" penetration. Standard on all meters with built-in pins and the 2-E and 4-E electrodes. Used on wood up to 6/4 (1 ½”), concrete and gypsum.
MCS-2

This moisture content standard is great for verifying that your P-2000 or RDM-3P paper moisture meters are in calibration. With two electrical resistance values (6% and 10%) to test your meter against, you can be sure that your readings will stand up to the strictest standards of accuracy. The MCS-2 is also available with a letter of certification traceable to NIST.

Please Note:

For P-2000 meters with serial numbers up to 19389, please order the MCS-2

For P-2000 meters with serial numbers of 19390 and above, please order the MCS-2X.  

TM-100-SB-PKG

Manufacturer: Not Available
Product ID: TM-100-SB-PKG
Price:
QTY Add to cart

TM-100-SB-PKG

The Delmhorst TM-100 digital LCD moisture meter measures temperatures between -40 deg. F to 300 deg. F/-40 deg. C to 150 deg. C. Ideal for various applications in industry and agriculture, this instrument incorporates reliable semiconductor technology in a sturdy ABS plastic case. The RTD sensor is housed in stainless steel to withstand the most demanding applications.

  • Bright, clear digital display.
  • Temperature Range: -40ºF to 300ºF (-40ºC to 150ºC).
  • Fast response time:
    • 2 minutes for 63% excursion.
    • 4-5 minutes full excursion.
  • Can be used to check temperature in the air or in penetrable solids.
  • Size: 2 3/4” x 4 3/4” x 1 3/4”.
  • Weight: 8 oz.
  • Rugged construction ensures years of reliable use.
  • Sturdy plastic carrying case.
  • 9V battery.
  • 1-year warranty.
ELECTRODES
Delmhorst offers a wide assortment of electrodes known throughout the industry for their durability. All Delmhorst electrodes fit any Delmhorst moisture meter. Below are electrodes that are typically used for this model:
PE-22 PROBE EXTENSION

Used with TS-107 Sensor. Available in 3 ft. length.

SH-44 HANDLE

Used with TS-107 Sensor.

TS-102 SENSOR

Used for liquids, gases, ambient temperature. Stainless steel probe length 5". Delrin handle.

TS-107 SENSOR

Used for penetrable solids. Ideal for hay and grain. TS-107, (3 1/2" long) is made of aluminum and delrin parts with a stainless steel tip. Requires SH-44 handle.

ACCESSORIES
No accessories available

TM-100W-CS

Manufacturer: Not Available
Product ID: TM-100W-CS
Price:
QTY Add to cart

TM-100W-CS

The Delmhorst TM-100 digital LCD moisture meter measures temperatures between -40 deg. F to 300 deg. F/-40 deg. C to 150 deg. C. Ideal for various applications in industry and agriculture, this instrument incorporates reliable semiconductor technology in a sturdy ABS plastic case. The RTD sensor is housed in stainless steel to withstand the most demanding applications.

  • Bright, clear digital display.
  • Temperature Range: -40ºF to 300ºF (-40ºC to 150ºC).
  • Fast response time:
    • 2 minutes for 63% excursion.
    • 4-5 minutes full excursion.
  • Can be used to check temperature in the air or in penetrable solids.
  • Size: 2 3/4” x 4 3/4” x 1 3/4”.
  • Weight: 8 oz.
  • Rugged construction ensures years of reliable use.
  • Sturdy plastic carrying case.
  • 9V battery.
  • 1-year warranty.
ELECTRODES
Delmhorst offers a wide assortment of electrodes known throughout the industry for their durability. All Delmhorst electrodes fit any Delmhorst moisture meter. Below are electrodes that are typically used for this model:
PE-22 PROBE EXTENSION

Used with TS-107 Sensor. Available in 3 ft. length.

SH-44 HANDLE

Used with TS-107 Sensor.

TS-102 SENSOR

Used for liquids, gases, ambient temperature. Stainless steel probe length 5". Delrin handle.

TS-107 SENSOR

Used for penetrable solids. Ideal for hay and grain. TS-107, (3 1/2" long) is made of aluminum and delrin parts with a stainless steel tip. Requires SH-44 handle.

ACCESSORIES
No accessories available