C-2000W-CS

Manufacturer: Delmhorst Instrument Co
Product ID: C-2000W-CS
Price: $442.37
QTY Add to cart

C-2000W-CS

With the C-2000 moisture meter from Delmhorst, you can effectively measure moisture content, ensuring high-quality cotton every time.

  • Bright, clear digital display.
  • Four separate scales for testing lint cotton, seed cotton, wool and viscose/rayon.
  • Audible, adjustable alarm alerts you when your pre-selected MC has been reached.
  • Averages up to 100 accumulated readings.
  • Built-in calibration check.
  • Moisture Range: 4%-16% on lint cotton; 6%-20% on seed cotton; 12.3%-25.2% on wool and 6%-22.4% on viscose/rayon.
  • Built-in connector accepts any Delmhorst electrode.
  • Size: 8" x 3" x 1 5/8".
  • Weight: 10 oz.
  • Rugged construction ensures years of reliable use.
  • Sturdy plastic carrying case.
  • 9V battery.
  • 1-year Warranty.
ELECTRODES
 Delmhorst offers a wide assortment of electrodes known throughout the industry for their durability. All Delmhorst electrodes fit any Delmhorst moisture meter. Below are electrodes that are typically used for this model:
30-E/C

Used for bales, 9 1/2" insulated pins, with 8 1/4" penetration, eliminates the effect of surface moisture.

37-E/C

Used for yarn, 1 1/2" pins with 1" penetration.

52-E/C

Cup type electrode used for lint or seed cotton.

830-T/C

Used for modules, heavy duty steel, 36" T-handle.

ACCESSORIES

MCS-COTTON

This moisture content standard is great for verifying that your C-2000 cotton moisture meter is in calibration. Note that the 30-E/C long pin electrode is required to use the MCS-COTTON. With two electrical resistance values (6% and 12%) to test your meter against, you can be sure that your readings will stand up to the strictest standards of accuracy. The MCS-COTTON is also available with a letter of certification traceable to NIST.

F-2000

Manufacturer: Delmhorst Instrument Co
Product ID: F-2000
Price: $261.52
QTY Add to cart

F-2000

The F-2000 is great for hay producers looking to enhance quality control. The F-2000 checks hay moisture in the windrow or in bales, and comes with the same accuracy and clarity as the FX-2000!

  • Bright, clear digital display.
  • Averages up to 100 accumulated readings.
  • Displays average and highest of accumulated readings.
  • Moisture Range: 6%-40%.on hay.
  • Built-in calibration check.
  • Audible, adjustable alarm alerts you when a pre-selected MC has been reached.
  • Size: 8” x 3” x 1 5/8”.
  • Weight: 10 oz.
  • Rugged construction ensures years of reliable use.
  • Optional sturdy plastic carrying case.
  • 9V battery.
  • 3-year warranty
ELECTRODES
 Delmhorst offers a wide assortment of electrodes known throughout the industry for their durability. All Delmhorst electrodes fit any Delmhorst moisture meter. Below are electrodes that are typically used for this model:
1235

10” prod used for testing standard bales. Attaches directly to the connector on top of the meter. Also available in 18” length as 1235/18.

830 Series

Prods for testing standard and high density bales (requires H-4 Handle).

Available as:

  • 830-2 – 10” prod
  • 830-3 – 18” prod
  • 830-4 – 36” prod
  • 830-5 – 12” for hops
831 Short Pin Prod

For testing hay in the windrow (requires H-4 Handle).

H-4 Handle

Electrode handle that attaches to the built-in connector on the top of any moisture meter. Can be used with the 830 series prods, 831 short pin disc shaped prod, and 832 long pin disc shaped prod. This is useful for large or high density bales of hay or scrap paper. Two handed operation is recommended over using a prod that connects directly to the top of the meter (like our 1235 series) to minimize stress placed on the meter casing.

ACCESSORIES

324CAS-0065 Carrying Case

This carrying case may be purchased as a part of one of our deluxe moisture meter packages, and fits all prods except the 1986 bale sensor, 830-3 prod, and 830-4 prod. Can also be purchased separately.

MCS-4

This moisture content standard is great for verifying that your F-series hay moisture meter is in calibration. With two electrical resistance values (16% and 22%) to test your meter against, you can be sure that your readings will stand up to the strictest standards of accuracy. The MCS-4 is also available with a letter of certification traceable to NIST.

F-2000-10-PKG

Manufacturer: Delmhorst Instrument Co
Product ID: F-2000-10-PKG
Price: $420.29
QTY Add to cart

F-2000-10-PKG

The F-2000 is great for hay producers looking to enhance quality control. The F-2000 checks hay moisture in the windrow or in bales, and comes with the same accuracy and clarity as the FX-2000!

  • Bright, clear digital display.
  • Averages up to 100 accumulated readings.
  • Displays average and highest of accumulated readings.
  • Moisture Range: 6%-40%.on hay.
  • Built-in calibration check.
  • Audible, adjustable alarm alerts you when a pre-selected MC has been reached.
  • Size: 8” x 3” x 1 5/8”.
  • Weight: 10 oz.
  • Rugged construction ensures years of reliable use.
  • Optional sturdy plastic carrying case.
  • 9V battery.
  • 3-year warranty
ELECTRODES
 Delmhorst offers a wide assortment of electrodes known throughout the industry for their durability. All Delmhorst electrodes fit any Delmhorst moisture meter. Below are electrodes that are typically used for this model:
1235

10” prod used for testing standard bales. Attaches directly to the connector on top of the meter. Also available in 18” length as 1235/18.

830 Series

Prods for testing standard and high density bales (requires H-4 Handle).

Available as:

  • 830-2 – 10” prod
  • 830-3 – 18” prod
  • 830-4 – 36” prod
  • 830-5 – 12” for hops
831 Short Pin Prod

For testing hay in the windrow (requires H-4 Handle).

H-4 Handle

Electrode handle that attaches to the built-in connector on the top of any moisture meter. Can be used with the 830 series prods, 831 short pin disc shaped prod, and 832 long pin disc shaped prod. This is useful for large or high density bales of hay or scrap paper. Two handed operation is recommended over using a prod that connects directly to the top of the meter (like our 1235 series) to minimize stress placed on the meter casing.

ACCESSORIES

324CAS-0065 Carrying Case

This carrying case may be purchased as a part of one of our deluxe moisture meter packages, and fits all prods except the 1986 bale sensor, 830-3 prod, and 830-4 prod. Can also be purchased separately.

MCS-4

This moisture content standard is great for verifying that your F-series hay moisture meter is in calibration. With two electrical resistance values (16% and 22%) to test your meter against, you can be sure that your readings will stand up to the strictest standards of accuracy. The MCS-4 is also available with a letter of certification traceable to NIST.

F-2000-1235

Manufacturer: Delmhorst Instrument Co
Product ID: F-2000-1235
Price: $301.60
QTY Add to cart

F-2000-1235

The F-2000 is great for hay producers looking to enhance quality control. The F-2000 checks hay moisture in the windrow or in bales, and comes with the same accuracy and clarity as the FX-2000!

  • Bright, clear digital display.
  • Averages up to 100 accumulated readings.
  • Displays average and highest of accumulated readings.
  • Moisture Range: 6%-40%.on hay.
  • Built-in calibration check.
  • Audible, adjustable alarm alerts you when a pre-selected MC has been reached.
  • Size: 8” x 3” x 1 5/8”.
  • Weight: 10 oz.
  • Rugged construction ensures years of reliable use.
  • Optional sturdy plastic carrying case.
  • 9V battery.
  • 3-year warranty
ELECTRODES
 Delmhorst offers a wide assortment of electrodes known throughout the industry for their durability. All Delmhorst electrodes fit any Delmhorst moisture meter. Below are electrodes that are typically used for this model:
1235

10” prod used for testing standard bales. Attaches directly to the connector on top of the meter. Also available in 18” length as 1235/18.

830 Series

Prods for testing standard and high density bales (requires H-4 Handle).

Available as:

  • 830-2 – 10” prod
  • 830-3 – 18” prod
  • 830-4 – 36” prod
  • 830-5 – 12” for hops
831 Short Pin Prod

For testing hay in the windrow (requires H-4 Handle).

H-4 Handle

Electrode handle that attaches to the built-in connector on the top of any moisture meter. Can be used with the 830 series prods, 831 short pin disc shaped prod, and 832 long pin disc shaped prod. This is useful for large or high density bales of hay or scrap paper. Two handed operation is recommended over using a prod that connects directly to the top of the meter (like our 1235 series) to minimize stress placed on the meter casing.

ACCESSORIES

324CAS-0065 Carrying Case

This carrying case may be purchased as a part of one of our deluxe moisture meter packages, and fits all prods except the 1986 bale sensor, 830-3 prod, and 830-4 prod. Can also be purchased separately.

MCS-4

This moisture content standard is great for verifying that your F-series hay moisture meter is in calibration. With two electrical resistance values (16% and 22%) to test your meter against, you can be sure that your readings will stand up to the strictest standards of accuracy. The MCS-4 is also available with a letter of certification traceable to NIST.

F-2000-18-PKG

Manufacturer: Delmhorst Instrument Co
Product ID: F-2000-18-PKG
Price: $420.29
QTY Add to cart

F-2000-18-PKG

The F-2000 is great for hay producers looking to enhance quality control. The F-2000 checks hay moisture in the windrow or in bales, and comes with the same accuracy and clarity as the FX-2000!

  • Bright, clear digital display.
  • Averages up to 100 accumulated readings.
  • Displays average and highest of accumulated readings.
  • Moisture Range: 6%-40%.on hay.
  • Built-in calibration check.
  • Audible, adjustable alarm alerts you when a pre-selected MC has been reached.
  • Size: 8” x 3” x 1 5/8”.
  • Weight: 10 oz.
  • Rugged construction ensures years of reliable use.
  • Optional sturdy plastic carrying case.
  • 9V battery.
  • 3-year warranty
ELECTRODES
 Delmhorst offers a wide assortment of electrodes known throughout the industry for their durability. All Delmhorst electrodes fit any Delmhorst moisture meter. Below are electrodes that are typically used for this model:
1235

10” prod used for testing standard bales. Attaches directly to the connector on top of the meter. Also available in 18” length as 1235/18.

830 Series

Prods for testing standard and high density bales (requires H-4 Handle).

Available as:

  • 830-2 – 10” prod
  • 830-3 – 18” prod
  • 830-4 – 36” prod
  • 830-5 – 12” for hops
831 Short Pin Prod

For testing hay in the windrow (requires H-4 Handle).

H-4 Handle

Electrode handle that attaches to the built-in connector on the top of any moisture meter. Can be used with the 830 series prods, 831 short pin disc shaped prod, and 832 long pin disc shaped prod. This is useful for large or high density bales of hay or scrap paper. Two handed operation is recommended over using a prod that connects directly to the top of the meter (like our 1235 series) to minimize stress placed on the meter casing.

ACCESSORIES

324CAS-0065 Carrying Case

This carrying case may be purchased as a part of one of our deluxe moisture meter packages, and fits all prods except the 1986 bale sensor, 830-3 prod, and 830-4 prod. Can also be purchased separately.

MCS-4

This moisture content standard is great for verifying that your F-series hay moisture meter is in calibration. With two electrical resistance values (16% and 22%) to test your meter against, you can be sure that your readings will stand up to the strictest standards of accuracy. The MCS-4 is also available with a letter of certification traceable to NIST.

F-2000-36-PKG

Manufacturer: Delmhorst Instrument Co
Product ID: F-2000-36-PKG
Price: $431.08
QTY Add to cart

F-2000-36-PKG

The F-2000 is great for hay producers looking to enhance quality control. The F-2000 checks hay moisture in the windrow or in bales, and comes with the same accuracy and clarity as the FX-2000!

  • Bright, clear digital display.
  • Averages up to 100 accumulated readings.
  • Displays average and highest of accumulated readings.
  • Moisture Range: 6%-40%.on hay.
  • Built-in calibration check.
  • Audible, adjustable alarm alerts you when a pre-selected MC has been reached.
  • Size: 8” x 3” x 1 5/8”.
  • Weight: 10 oz.
  • Rugged construction ensures years of reliable use.
  • Optional sturdy plastic carrying case.
  • 9V battery.
  • 3-year warranty
ELECTRODES
 Delmhorst offers a wide assortment of electrodes known throughout the industry for their durability. All Delmhorst electrodes fit any Delmhorst moisture meter. Below are electrodes that are typically used for this model:
1235

10” prod used for testing standard bales. Attaches directly to the connector on top of the meter. Also available in 18” length as 1235/18.

830 Series

Prods for testing standard and high density bales (requires H-4 Handle).

Available as:

  • 830-2 – 10” prod
  • 830-3 – 18” prod
  • 830-4 – 36” prod
  • 830-5 – 12” for hops
831 Short Pin Prod

For testing hay in the windrow (requires H-4 Handle).

H-4 Handle

Electrode handle that attaches to the built-in connector on the top of any moisture meter. Can be used with the 830 series prods, 831 short pin disc shaped prod, and 832 long pin disc shaped prod. This is useful for large or high density bales of hay or scrap paper. Two handed operation is recommended over using a prod that connects directly to the top of the meter (like our 1235 series) to minimize stress placed on the meter casing.

ACCESSORIES

324CAS-0065 Carrying Case

This carrying case may be purchased as a part of one of our deluxe moisture meter packages, and fits all prods except the 1986 bale sensor, 830-3 prod, and 830-4 prod. Can also be purchased separately.

MCS-4

This moisture content standard is great for verifying that your F-series hay moisture meter is in calibration. With two electrical resistance values (16% and 22%) to test your meter against, you can be sure that your readings will stand up to the strictest standards of accuracy. The MCS-4 is also available with a letter of certification traceable to NIST.

F-2000-AA-PKG

Manufacturer: Delmhorst Instrument Co
Product ID: F-2000-AA-PKG
Price: $384.82
QTY Add to cart

F-2000-AA-PKG

The F-2000 is great for hay producers looking to enhance quality control. The F-2000 checks hay moisture in the windrow or in bales, and comes with the same accuracy and clarity as the FX-2000!

  • Bright, clear digital display.
  • Averages up to 100 accumulated readings.
  • Displays average and highest of accumulated readings.
  • Moisture Range: 6%-40%.on hay.
  • Built-in calibration check.
  • Audible, adjustable alarm alerts you when a pre-selected MC has been reached.
  • Size: 8” x 3” x 1 5/8”.
  • Weight: 10 oz.
  • Rugged construction ensures years of reliable use.
  • Optional sturdy plastic carrying case.
  • 9V battery.
  • 3-year warranty
ELECTRODES
 Delmhorst offers a wide assortment of electrodes known throughout the industry for their durability. All Delmhorst electrodes fit any Delmhorst moisture meter. Below are electrodes that are typically used for this model:
1235

10” prod used for testing standard bales. Attaches directly to the connector on top of the meter. Also available in 18” length as 1235/18.

830 Series

Prods for testing standard and high density bales (requires H-4 Handle).

Available as:

  • 830-2 – 10” prod
  • 830-3 – 18” prod
  • 830-4 – 36” prod
  • 830-5 – 12” for hops
831 Short Pin Prod

For testing hay in the windrow (requires H-4 Handle).

H-4 Handle

Electrode handle that attaches to the built-in connector on the top of any moisture meter. Can be used with the 830 series prods, 831 short pin disc shaped prod, and 832 long pin disc shaped prod. This is useful for large or high density bales of hay or scrap paper. Two handed operation is recommended over using a prod that connects directly to the top of the meter (like our 1235 series) to minimize stress placed on the meter casing.

ACCESSORIES

324CAS-0065 Carrying Case

This carrying case may be purchased as a part of one of our deluxe moisture meter packages, and fits all prods except the 1986 bale sensor, 830-3 prod, and 830-4 prod. Can also be purchased separately.

MCS-4

This moisture content standard is great for verifying that your F-series hay moisture meter is in calibration. With two electrical resistance values (16% and 22%) to test your meter against, you can be sure that your readings will stand up to the strictest standards of accuracy. The MCS-4 is also available with a letter of certification traceable to NIST.

F-2000-PKG

Manufacturer: Delmhorst Instrument Co
Product ID: F-2000-PKG
Price: $384.82
QTY Add to cart

F-2000-PKG

The F-2000 is great for hay producers looking to enhance quality control. The F-2000 checks hay moisture in the windrow or in bales, and comes with the same accuracy and clarity as the FX-2000!

  • Bright, clear digital display.
  • Averages up to 100 accumulated readings.
  • Displays average and highest of accumulated readings.
  • Moisture Range: 6%-40%.on hay.
  • Built-in calibration check.
  • Audible, adjustable alarm alerts you when a pre-selected MC has been reached.
  • Size: 8” x 3” x 1 5/8”.
  • Weight: 10 oz.
  • Rugged construction ensures years of reliable use.
  • Optional sturdy plastic carrying case.
  • 9V battery.
  • 3-year warranty
ELECTRODES
 Delmhorst offers a wide assortment of electrodes known throughout the industry for their durability. All Delmhorst electrodes fit any Delmhorst moisture meter. Below are electrodes that are typically used for this model:
1235

10” prod used for testing standard bales. Attaches directly to the connector on top of the meter. Also available in 18” length as 1235/18.

830 Series

Prods for testing standard and high density bales (requires H-4 Handle).

Available as:

  • 830-2 – 10” prod
  • 830-3 – 18” prod
  • 830-4 – 36” prod
  • 830-5 – 12” for hops
831 Short Pin Prod

For testing hay in the windrow (requires H-4 Handle).

H-4 Handle

Electrode handle that attaches to the built-in connector on the top of any moisture meter. Can be used with the 830 series prods, 831 short pin disc shaped prod, and 832 long pin disc shaped prod. This is useful for large or high density bales of hay or scrap paper. Two handed operation is recommended over using a prod that connects directly to the top of the meter (like our 1235 series) to minimize stress placed on the meter casing.

ACCESSORIES

324CAS-0065 Carrying Case

This carrying case may be purchased as a part of one of our deluxe moisture meter packages, and fits all prods except the 1986 bale sensor, 830-3 prod, and 830-4 prod. Can also be purchased separately.

MCS-4

This moisture content standard is great for verifying that your F-series hay moisture meter is in calibration. With two electrical resistance values (16% and 22%) to test your meter against, you can be sure that your readings will stand up to the strictest standards of accuracy. The MCS-4 is also available with a letter of certification traceable to NIST.

F-2000T

Manufacturer: Delmhorst Instrument Co
Product ID: F-2000T
Price: $384.82
QTY Add to cart

F-2000T

The F-2000 is great for hay producers looking to enhance quality control. The F-2000 checks hay moisture in the windrow or in bales, and comes with the same accuracy and clarity as the FX-2000!

  • Bright, clear digital display.
  • Averages up to 100 accumulated readings.
  • Displays average and highest of accumulated readings.
  • Moisture Range: 6%-40%.on hay.
  • Built-in calibration check.
  • Audible, adjustable alarm alerts you when a pre-selected MC has been reached.
  • Size: 8” x 3” x 1 5/8”.
  • Weight: 10 oz.
  • Rugged construction ensures years of reliable use.
  • Optional sturdy plastic carrying case.
  • 9V battery.
  • 3-year warranty
ELECTRODES
 Delmhorst offers a wide assortment of electrodes known throughout the industry for their durability. All Delmhorst electrodes fit any Delmhorst moisture meter. Below are electrodes that are typically used for this model:
1235

10” prod used for testing standard bales. Attaches directly to the connector on top of the meter. Also available in 18” length as 1235/18.

830 Series

Prods for testing standard and high density bales (requires H-4 Handle).

Available as:

  • 830-2 – 10” prod
  • 830-3 – 18” prod
  • 830-4 – 36” prod
  • 830-5 – 12” for hops
831 Short Pin Prod

For testing hay in the windrow (requires H-4 Handle).

H-4 Handle

Electrode handle that attaches to the built-in connector on the top of any moisture meter. Can be used with the 830 series prods, 831 short pin disc shaped prod, and 832 long pin disc shaped prod. This is useful for large or high density bales of hay or scrap paper. Two handed operation is recommended over using a prod that connects directly to the top of the meter (like our 1235 series) to minimize stress placed on the meter casing.

ACCESSORIES

324CAS-0065 Carrying Case

This carrying case may be purchased as a part of one of our deluxe moisture meter packages, and fits all prods except the 1986 bale sensor, 830-3 prod, and 830-4 prod. Can also be purchased separately.

MCS-4

This moisture content standard is great for verifying that your F-series hay moisture meter is in calibration. With two electrical resistance values (16% and 22%) to test your meter against, you can be sure that your readings will stand up to the strictest standards of accuracy. The MCS-4 is also available with a letter of certification traceable to NIST.

F-6

Manufacturer: Delmhorst Instrument Co
Product ID: F-6
Price: $226.58
QTY Add to cart

F-6

With simplified controls, the F-6/6-30 is a great entry-level meter for value-minded hay producers. It is also a favorite among those serving the export markets that require lower MC range readings.

  • Easy-to-read analog display.
  • Moisture Range: 6%-30% on hay.
  • Also available with 13%-40% MC range as F-6.
  • Built-in calibration check.
  • Size: 8” x 3” x 1 5/8”.
  • Weight: 10 oz.
  • Rugged construction ensures years of reliable use.
  • Optional sturdy plastic carrying case.
  • 9V battery.
  • 1-year warranty
ELECTRODES
Delmhorst offers a wide assortment of electrodes known throughout the industry for their durability. All Delmhorst electrodes fit any Delmhorst moisture meter. Below are electrodes that are typically used for this model:
1235

10” prod used for testing standard bales. Attaches directly to the connector on top of the meter. Also available in 18” length as 1235/18.

830 Series

Prods for testing standard and high density bales (requires H-4 Handle).

Available as:

  • 830-2 – 10” prod
  • 830-3 – 18” prod
  • 830-4 – 36” prod
  • 830-5 – 12” for hops
831 Short Pin Prod

For testing hay in the windrow (requires H-4 Handle).

H-4 Handle

Electrode handle that attaches to the built-in connector on the top of any moisture meter. Can be used with the 830 series prods, 831 short pin disc shaped prod, and 832 long pin disc shaped prod. This is useful for large or high density bales of hay or scrap paper. Two handed operation is recommended over using a prod that connects directly to the top of the meter (like our 1235 series) to minimize stress placed on the meter casing.

ACCESSORIES

324CAS-0065 Carrying Case

This carrying case may be purchased as a part of one of our deluxe moisture meter packages, and fits all prods except the 1986 bale sensor, 830-3 prod, and 830-4 prod. Can also be purchased separately.

MCS-4

This moisture content standard is great for verifying that your F-series hay moisture meter is in calibration. With two electrical resistance values (16% and 22%) to test your meter against, you can be sure that your readings will stand up to the strictest standards of accuracy. The MCS-4 is also available with a letter of certification traceable to NIST.

F-6-10-PKG

Manufacturer: Delmhorst Instrument Co
Product ID: F-6-10-PKG
Price: $384.82
QTY Add to cart

F-6-10-PKG

With simplified controls, the F-6/6-30 is a great entry-level meter for value-minded hay producers. It is also a favorite among those serving the export markets that require lower MC range readings.

  • Easy-to-read analog display.
  • Moisture Range: 6%-30% on hay.
  • Also available with 13%-40% MC range as F-6.
  • Built-in calibration check.
  • Size: 8” x 3” x 1 5/8”.
  • Weight: 10 oz.
  • Rugged construction ensures years of reliable use.
  • Optional sturdy plastic carrying case.
  • 9V battery.
  • 1-year warranty
ELECTRODES
Delmhorst offers a wide assortment of electrodes known throughout the industry for their durability. All Delmhorst electrodes fit any Delmhorst moisture meter. Below are electrodes that are typically used for this model:
1235

10” prod used for testing standard bales. Attaches directly to the connector on top of the meter. Also available in 18” length as 1235/18.

830 Series

Prods for testing standard and high density bales (requires H-4 Handle).

Available as:

  • 830-2 – 10” prod
  • 830-3 – 18” prod
  • 830-4 – 36” prod
  • 830-5 – 12” for hops
831 Short Pin Prod

For testing hay in the windrow (requires H-4 Handle).

H-4 Handle

Electrode handle that attaches to the built-in connector on the top of any moisture meter. Can be used with the 830 series prods, 831 short pin disc shaped prod, and 832 long pin disc shaped prod. This is useful for large or high density bales of hay or scrap paper. Two handed operation is recommended over using a prod that connects directly to the top of the meter (like our 1235 series) to minimize stress placed on the meter casing.

ACCESSORIES

324CAS-0065 Carrying Case

This carrying case may be purchased as a part of one of our deluxe moisture meter packages, and fits all prods except the 1986 bale sensor, 830-3 prod, and 830-4 prod. Can also be purchased separately.

MCS-4

This moisture content standard is great for verifying that your F-series hay moisture meter is in calibration. With two electrical resistance values (16% and 22%) to test your meter against, you can be sure that your readings will stand up to the strictest standards of accuracy. The MCS-4 is also available with a letter of certification traceable to NIST.

F-6-1235

Manufacturer: Delmhorst Instrument Co
Product ID: F-6-1235
Price: $268.72
QTY Add to cart

F-6-1235

With simplified controls, the F-6/6-30 is a great entry-level meter for value-minded hay producers. It is also a favorite among those serving the export markets that require lower MC range readings.

  • Easy-to-read analog display.
  • Moisture Range: 6%-30% on hay.
  • Also available with 13%-40% MC range as F-6.
  • Built-in calibration check.
  • Size: 8” x 3” x 1 5/8”.
  • Weight: 10 oz.
  • Rugged construction ensures years of reliable use.
  • Optional sturdy plastic carrying case.
  • 9V battery.
  • 1-year warranty
ELECTRODES
Delmhorst offers a wide assortment of electrodes known throughout the industry for their durability. All Delmhorst electrodes fit any Delmhorst moisture meter. Below are electrodes that are typically used for this model:
1235

10” prod used for testing standard bales. Attaches directly to the connector on top of the meter. Also available in 18” length as 1235/18.

830 Series

Prods for testing standard and high density bales (requires H-4 Handle).

Available as:

  • 830-2 – 10” prod
  • 830-3 – 18” prod
  • 830-4 – 36” prod
  • 830-5 – 12” for hops
831 Short Pin Prod

For testing hay in the windrow (requires H-4 Handle).

H-4 Handle

Electrode handle that attaches to the built-in connector on the top of any moisture meter. Can be used with the 830 series prods, 831 short pin disc shaped prod, and 832 long pin disc shaped prod. This is useful for large or high density bales of hay or scrap paper. Two handed operation is recommended over using a prod that connects directly to the top of the meter (like our 1235 series) to minimize stress placed on the meter casing.

ACCESSORIES

324CAS-0065 Carrying Case

This carrying case may be purchased as a part of one of our deluxe moisture meter packages, and fits all prods except the 1986 bale sensor, 830-3 prod, and 830-4 prod. Can also be purchased separately.

MCS-4

This moisture content standard is great for verifying that your F-series hay moisture meter is in calibration. With two electrical resistance values (16% and 22%) to test your meter against, you can be sure that your readings will stand up to the strictest standards of accuracy. The MCS-4 is also available with a letter of certification traceable to NIST.

F-6-18-PKG

Manufacturer: Delmhorst Instrument Co
Product ID: F-6-18-PKG
Price: $384.82
QTY Add to cart

F-6-18-PKG

With simplified controls, the F-6/6-30 is a great entry-level meter for value-minded hay producers. It is also a favorite among those serving the export markets that require lower MC range readings.

  • Easy-to-read analog display.
  • Moisture Range: 6%-30% on hay.
  • Also available with 13%-40% MC range as F-6.
  • Built-in calibration check.
  • Size: 8” x 3” x 1 5/8”.
  • Weight: 10 oz.
  • Rugged construction ensures years of reliable use.
  • Optional sturdy plastic carrying case.
  • 9V battery.
  • 1-year warranty
ELECTRODES
Delmhorst offers a wide assortment of electrodes known throughout the industry for their durability. All Delmhorst electrodes fit any Delmhorst moisture meter. Below are electrodes that are typically used for this model:
1235

10” prod used for testing standard bales. Attaches directly to the connector on top of the meter. Also available in 18” length as 1235/18.

830 Series

Prods for testing standard and high density bales (requires H-4 Handle).

Available as:

  • 830-2 – 10” prod
  • 830-3 – 18” prod
  • 830-4 – 36” prod
  • 830-5 – 12” for hops
831 Short Pin Prod

For testing hay in the windrow (requires H-4 Handle).

H-4 Handle

Electrode handle that attaches to the built-in connector on the top of any moisture meter. Can be used with the 830 series prods, 831 short pin disc shaped prod, and 832 long pin disc shaped prod. This is useful for large or high density bales of hay or scrap paper. Two handed operation is recommended over using a prod that connects directly to the top of the meter (like our 1235 series) to minimize stress placed on the meter casing.

ACCESSORIES

324CAS-0065 Carrying Case

This carrying case may be purchased as a part of one of our deluxe moisture meter packages, and fits all prods except the 1986 bale sensor, 830-3 prod, and 830-4 prod. Can also be purchased separately.

MCS-4

This moisture content standard is great for verifying that your F-series hay moisture meter is in calibration. With two electrical resistance values (16% and 22%) to test your meter against, you can be sure that your readings will stand up to the strictest standards of accuracy. The MCS-4 is also available with a letter of certification traceable to NIST.

F-6-36-PKG

Manufacturer: Delmhorst Instrument Co
Product ID: F-6-36-PKG
Price: $389.97
QTY Add to cart

F-6-36-PKG

With simplified controls, the F-6/6-30 is a great entry-level meter for value-minded hay producers. It is also a favorite among those serving the export markets that require lower MC range readings.

  • Easy-to-read analog display.
  • Moisture Range: 6%-30% on hay.
  • Also available with 13%-40% MC range as F-6.
  • Built-in calibration check.
  • Size: 8” x 3” x 1 5/8”.
  • Weight: 10 oz.
  • Rugged construction ensures years of reliable use.
  • Optional sturdy plastic carrying case.
  • 9V battery.
  • 1-year warranty
ELECTRODES
Delmhorst offers a wide assortment of electrodes known throughout the industry for their durability. All Delmhorst electrodes fit any Delmhorst moisture meter. Below are electrodes that are typically used for this model:
1235

10” prod used for testing standard bales. Attaches directly to the connector on top of the meter. Also available in 18” length as 1235/18.

830 Series

Prods for testing standard and high density bales (requires H-4 Handle).

Available as:

  • 830-2 – 10” prod
  • 830-3 – 18” prod
  • 830-4 – 36” prod
  • 830-5 – 12” for hops
831 Short Pin Prod

For testing hay in the windrow (requires H-4 Handle).

H-4 Handle

Electrode handle that attaches to the built-in connector on the top of any moisture meter. Can be used with the 830 series prods, 831 short pin disc shaped prod, and 832 long pin disc shaped prod. This is useful for large or high density bales of hay or scrap paper. Two handed operation is recommended over using a prod that connects directly to the top of the meter (like our 1235 series) to minimize stress placed on the meter casing.

ACCESSORIES

324CAS-0065 Carrying Case

This carrying case may be purchased as a part of one of our deluxe moisture meter packages, and fits all prods except the 1986 bale sensor, 830-3 prod, and 830-4 prod. Can also be purchased separately.

MCS-4

This moisture content standard is great for verifying that your F-series hay moisture meter is in calibration. With two electrical resistance values (16% and 22%) to test your meter against, you can be sure that your readings will stand up to the strictest standards of accuracy. The MCS-4 is also available with a letter of certification traceable to NIST.

F-6-6-30

Manufacturer: Delmhorst Instrument Co
Product ID: F-6-6-30
Price: $226.58
QTY Add to cart

F-6-6-30

With simplified controls, the F-6/6-30 is a great entry-level meter for value-minded hay producers. It is also a favorite among those serving the export markets that require lower MC range readings.

  • Easy-to-read analog display.
  • Moisture Range: 6%-30% on hay.
  • Also available with 13%-40% MC range as F-6.
  • Built-in calibration check.
  • Size: 8” x 3” x 1 5/8”.
  • Weight: 10 oz.
  • Rugged construction ensures years of reliable use.
  • Optional sturdy plastic carrying case.
  • 9V battery.
  • 1-year warranty
ELECTRODES
Delmhorst offers a wide assortment of electrodes known throughout the industry for their durability. All Delmhorst electrodes fit any Delmhorst moisture meter. Below are electrodes that are typically used for this model:
1235

10” prod used for testing standard bales. Attaches directly to the connector on top of the meter. Also available in 18” length as 1235/18.

830 Series

Prods for testing standard and high density bales (requires H-4 Handle).

Available as:

  • 830-2 – 10” prod
  • 830-3 – 18” prod
  • 830-4 – 36” prod
  • 830-5 – 12” for hops
831 Short Pin Prod

For testing hay in the windrow (requires H-4 Handle).

H-4 Handle

Electrode handle that attaches to the built-in connector on the top of any moisture meter. Can be used with the 830 series prods, 831 short pin disc shaped prod, and 832 long pin disc shaped prod. This is useful for large or high density bales of hay or scrap paper. Two handed operation is recommended over using a prod that connects directly to the top of the meter (like our 1235 series) to minimize stress placed on the meter casing.

ACCESSORIES

324CAS-0065 Carrying Case

This carrying case may be purchased as a part of one of our deluxe moisture meter packages, and fits all prods except the 1986 bale sensor, 830-3 prod, and 830-4 prod. Can also be purchased separately.

MCS-4

This moisture content standard is great for verifying that your F-series hay moisture meter is in calibration. With two electrical resistance values (16% and 22%) to test your meter against, you can be sure that your readings will stand up to the strictest standards of accuracy. The MCS-4 is also available with a letter of certification traceable to NIST.

F-6-6-30-1235

Manufacturer: Delmhorst Instrument Co
Product ID: F-6-6-30-1235
Price: $268.72
QTY Add to cart

F-6-6-30-1235

With simplified controls, the F-6/6-30 is a great entry-level meter for value-minded hay producers. It is also a favorite among those serving the export markets that require lower MC range readings.

  • Easy-to-read analog display.
  • Moisture Range: 6%-30% on hay.
  • Also available with 13%-40% MC range as F-6.
  • Built-in calibration check.
  • Size: 8” x 3” x 1 5/8”.
  • Weight: 10 oz.
  • Rugged construction ensures years of reliable use.
  • Optional sturdy plastic carrying case.
  • 9V battery.
  • 1-year warranty
ELECTRODES
Delmhorst offers a wide assortment of electrodes known throughout the industry for their durability. All Delmhorst electrodes fit any Delmhorst moisture meter. Below are electrodes that are typically used for this model:
1235

10” prod used for testing standard bales. Attaches directly to the connector on top of the meter. Also available in 18” length as 1235/18.

830 Series

Prods for testing standard and high density bales (requires H-4 Handle).

Available as:

  • 830-2 – 10” prod
  • 830-3 – 18” prod
  • 830-4 – 36” prod
  • 830-5 – 12” for hops
831 Short Pin Prod

For testing hay in the windrow (requires H-4 Handle).

H-4 Handle

Electrode handle that attaches to the built-in connector on the top of any moisture meter. Can be used with the 830 series prods, 831 short pin disc shaped prod, and 832 long pin disc shaped prod. This is useful for large or high density bales of hay or scrap paper. Two handed operation is recommended over using a prod that connects directly to the top of the meter (like our 1235 series) to minimize stress placed on the meter casing.

ACCESSORIES

324CAS-0065 Carrying Case

This carrying case may be purchased as a part of one of our deluxe moisture meter packages, and fits all prods except the 1986 bale sensor, 830-3 prod, and 830-4 prod. Can also be purchased separately.

MCS-4

This moisture content standard is great for verifying that your F-series hay moisture meter is in calibration. With two electrical resistance values (16% and 22%) to test your meter against, you can be sure that your readings will stand up to the strictest standards of accuracy. The MCS-4 is also available with a letter of certification traceable to NIST.

F-6-6-30-18-PKG

Manufacturer: Delmhorst Instrument Co
Product ID: F-6-6-30-18-PKG
Price: $384.82
QTY Add to cart

F-6-6-30-18-PKG

With simplified controls, the F-6/6-30 is a great entry-level meter for value-minded hay producers. It is also a favorite among those serving the export markets that require lower MC range readings.

  • Easy-to-read analog display.
  • Moisture Range: 6%-30% on hay.
  • Also available with 13%-40% MC range as F-6.
  • Built-in calibration check.
  • Size: 8” x 3” x 1 5/8”.
  • Weight: 10 oz.
  • Rugged construction ensures years of reliable use.
  • Optional sturdy plastic carrying case.
  • 9V battery.
  • 1-year warranty
ELECTRODES
Delmhorst offers a wide assortment of electrodes known throughout the industry for their durability. All Delmhorst electrodes fit any Delmhorst moisture meter. Below are electrodes that are typically used for this model:
1235

10” prod used for testing standard bales. Attaches directly to the connector on top of the meter. Also available in 18” length as 1235/18.

830 Series

Prods for testing standard and high density bales (requires H-4 Handle).

Available as:

  • 830-2 – 10” prod
  • 830-3 – 18” prod
  • 830-4 – 36” prod
  • 830-5 – 12” for hops
831 Short Pin Prod

For testing hay in the windrow (requires H-4 Handle).

H-4 Handle

Electrode handle that attaches to the built-in connector on the top of any moisture meter. Can be used with the 830 series prods, 831 short pin disc shaped prod, and 832 long pin disc shaped prod. This is useful for large or high density bales of hay or scrap paper. Two handed operation is recommended over using a prod that connects directly to the top of the meter (like our 1235 series) to minimize stress placed on the meter casing.

ACCESSORIES

324CAS-0065 Carrying Case

This carrying case may be purchased as a part of one of our deluxe moisture meter packages, and fits all prods except the 1986 bale sensor, 830-3 prod, and 830-4 prod. Can also be purchased separately.

MCS-4

This moisture content standard is great for verifying that your F-series hay moisture meter is in calibration. With two electrical resistance values (16% and 22%) to test your meter against, you can be sure that your readings will stand up to the strictest standards of accuracy. The MCS-4 is also available with a letter of certification traceable to NIST.

F-6-6-30-36-PKG

Manufacturer: Delmhorst Instrument Co
Product ID: F-6-6-30-36-PKG
Price: $389.97
QTY Add to cart

F-6-6-30-36-PKG

With simplified controls, the F-6/6-30 is a great entry-level meter for value-minded hay producers. It is also a favorite among those serving the export markets that require lower MC range readings.

  • Easy-to-read analog display.
  • Moisture Range: 6%-30% on hay.
  • Also available with 13%-40% MC range as F-6.
  • Built-in calibration check.
  • Size: 8” x 3” x 1 5/8”.
  • Weight: 10 oz.
  • Rugged construction ensures years of reliable use.
  • Optional sturdy plastic carrying case.
  • 9V battery.
  • 1-year warranty
ELECTRODES
Delmhorst offers a wide assortment of electrodes known throughout the industry for their durability. All Delmhorst electrodes fit any Delmhorst moisture meter. Below are electrodes that are typically used for this model:
1235

10” prod used for testing standard bales. Attaches directly to the connector on top of the meter. Also available in 18” length as 1235/18.

830 Series

Prods for testing standard and high density bales (requires H-4 Handle).

Available as:

  • 830-2 – 10” prod
  • 830-3 – 18” prod
  • 830-4 – 36” prod
  • 830-5 – 12” for hops
831 Short Pin Prod

For testing hay in the windrow (requires H-4 Handle).

H-4 Handle

Electrode handle that attaches to the built-in connector on the top of any moisture meter. Can be used with the 830 series prods, 831 short pin disc shaped prod, and 832 long pin disc shaped prod. This is useful for large or high density bales of hay or scrap paper. Two handed operation is recommended over using a prod that connects directly to the top of the meter (like our 1235 series) to minimize stress placed on the meter casing.

ACCESSORIES

324CAS-0065 Carrying Case

This carrying case may be purchased as a part of one of our deluxe moisture meter packages, and fits all prods except the 1986 bale sensor, 830-3 prod, and 830-4 prod. Can also be purchased separately.

MCS-4

This moisture content standard is great for verifying that your F-series hay moisture meter is in calibration. With two electrical resistance values (16% and 22%) to test your meter against, you can be sure that your readings will stand up to the strictest standards of accuracy. The MCS-4 is also available with a letter of certification traceable to NIST.

F-6-6-30-PKG

Manufacturer: Delmhorst Instrument Co
Product ID: F-6-6-30-PKG
Price: $374.04
QTY Add to cart

F-6-6-30-PKG

With simplified controls, the F-6/6-30 is a great entry-level meter for value-minded hay producers. It is also a favorite among those serving the export markets that require lower MC range readings.

  • Easy-to-read analog display.
  • Moisture Range: 6%-30% on hay.
  • Also available with 13%-40% MC range as F-6.
  • Built-in calibration check.
  • Size: 8” x 3” x 1 5/8”.
  • Weight: 10 oz.
  • Rugged construction ensures years of reliable use.
  • Optional sturdy plastic carrying case.
  • 9V battery.
  • 1-year warranty
ELECTRODES
Delmhorst offers a wide assortment of electrodes known throughout the industry for their durability. All Delmhorst electrodes fit any Delmhorst moisture meter. Below are electrodes that are typically used for this model:
1235

10” prod used for testing standard bales. Attaches directly to the connector on top of the meter. Also available in 18” length as 1235/18.

830 Series

Prods for testing standard and high density bales (requires H-4 Handle).

Available as:

  • 830-2 – 10” prod
  • 830-3 – 18” prod
  • 830-4 – 36” prod
  • 830-5 – 12” for hops
831 Short Pin Prod

For testing hay in the windrow (requires H-4 Handle).

H-4 Handle

Electrode handle that attaches to the built-in connector on the top of any moisture meter. Can be used with the 830 series prods, 831 short pin disc shaped prod, and 832 long pin disc shaped prod. This is useful for large or high density bales of hay or scrap paper. Two handed operation is recommended over using a prod that connects directly to the top of the meter (like our 1235 series) to minimize stress placed on the meter casing.

ACCESSORIES

324CAS-0065 Carrying Case

This carrying case may be purchased as a part of one of our deluxe moisture meter packages, and fits all prods except the 1986 bale sensor, 830-3 prod, and 830-4 prod. Can also be purchased separately.

MCS-4

This moisture content standard is great for verifying that your F-series hay moisture meter is in calibration. With two electrical resistance values (16% and 22%) to test your meter against, you can be sure that your readings will stand up to the strictest standards of accuracy. The MCS-4 is also available with a letter of certification traceable to NIST.

F-6-PKG

Manufacturer: Delmhorst Instrument Co
Product ID: F-6-PKG
Price: $374.04
QTY Add to cart

F-6-PKG

With simplified controls, the F-6/6-30 is a great entry-level meter for value-minded hay producers. It is also a favorite among those serving the export markets that require lower MC range readings.

  • Easy-to-read analog display.
  • Moisture Range: 6%-30% on hay.
  • Also available with 13%-40% MC range as F-6.
  • Built-in calibration check.
  • Size: 8” x 3” x 1 5/8”.
  • Weight: 10 oz.
  • Rugged construction ensures years of reliable use.
  • Optional sturdy plastic carrying case.
  • 9V battery.
  • 1-year warranty
ELECTRODES
Delmhorst offers a wide assortment of electrodes known throughout the industry for their durability. All Delmhorst electrodes fit any Delmhorst moisture meter. Below are electrodes that are typically used for this model:
1235

10” prod used for testing standard bales. Attaches directly to the connector on top of the meter. Also available in 18” length as 1235/18.

830 Series

Prods for testing standard and high density bales (requires H-4 Handle).

Available as:

  • 830-2 – 10” prod
  • 830-3 – 18” prod
  • 830-4 – 36” prod
  • 830-5 – 12” for hops
831 Short Pin Prod

For testing hay in the windrow (requires H-4 Handle).

H-4 Handle

Electrode handle that attaches to the built-in connector on the top of any moisture meter. Can be used with the 830 series prods, 831 short pin disc shaped prod, and 832 long pin disc shaped prod. This is useful for large or high density bales of hay or scrap paper. Two handed operation is recommended over using a prod that connects directly to the top of the meter (like our 1235 series) to minimize stress placed on the meter casing.

ACCESSORIES

324CAS-0065 Carrying Case

This carrying case may be purchased as a part of one of our deluxe moisture meter packages, and fits all prods except the 1986 bale sensor, 830-3 prod, and 830-4 prod. Can also be purchased separately.

MCS-4

This moisture content standard is great for verifying that your F-series hay moisture meter is in calibration. With two electrical resistance values (16% and 22%) to test your meter against, you can be sure that your readings will stand up to the strictest standards of accuracy. The MCS-4 is also available with a letter of certification traceable to NIST.

FX-2000-10-PKG

Manufacturer: Delmhorst Instrument Co
Product ID: FX-2000-10-PKG
Price: $700.81
QTY Add to cart

FX-2000-10-PKG

This state-of-the-art meter is ideal for high-volume producers who need the time-saving convenience of on-the-go monitoring. Whether in the windrow, on-the-go while baling, or in the bale, the FX-2000 gives clear, accurate moisture readings every step of the way!

  • Bright, clear digital display.
  • Can be used for on-the-go moisture monitoring or as a portable meter.
  • In continuous mode:
    • Takes two readings every second.
    • Displays the average and highest of eight accumulated readings.
    • Readings updated every 4 seconds.
    • Built-in back light.
    • Connects to tractor power supply.
  • In portable mode:
    • Averages up to 100 accumulated readings.
    • Displays average and highest of accumulated readings.
  • Moisture Range: 6%-40% on hay.
  • Built-in calibration check.
  • Audible, adjustable alarm alerts you when a pre-selected MC has been reached.
  • Size: 8” x 3” x 1 5/8”.
  • Weight: 10 oz.
  • Rugged construction ensures years of reliable use.
  • Optional sturdy plastic carrying case.
  • 9V battery.
  • 3-year warranty
ELECTRODES
 Delmhorst offers a wide assortment of electrodes known throughout the industry for their durability. All Delmhorst electrodes fit any Delmhorst moisture meter. Below are electrodes that are typically used for this model:
1235

10” prod used for testing standard bales. Attaches directly to the connector on top of the meter. Also available in 18” length as 1235/18.

1986 Bale Sensor

For continuous monitoring during baling. Comes with 30’ cable to run from the sensor mounted in the bale chamber to the meter in the cab. May be used with any model, but is recommended to use with Model FX-2000.

Also available as 1986/40 with 40’ cable for larger balers.

830 Series

Prods for testing standard and high density bales (requires H-4 Handle).

Available as:

  • 830-2 – 10” prod
  • 830-3 – 18” prod
  • 830-4 – 36” prod
  • 830-5 – 12” for hops
831 Short Pin Prod

For testing hay in the windrow (requires H-4 Handle).

H-4 Handle

Electrode handle that attaches to the built-in connector on the top of any moisture meter. Can be used with the 830 series prods, 831 short pin disc shaped prod, and 832 long pin disc shaped prod. This is useful for large or high density bales of hay or scrap paper. Two handed operation is recommended over using a prod that connects directly to the top of the meter (like our 1235 series) to minimize stress placed on the meter casing.

2110

Split bale chamber sensor for use with Freeman balers.

ACCESSORIES

1985

The 1985 is a replacement 30ft coaxial cable for the 1986 bale chamber sensor. Also available in 36ft and 40ft lengths as 1985/36 and 1985/40 respectively.

1986/EXTENSION

Extends mounting bolts used when installing 1986 bale chamber sensor. Used for newer balers with thick chamber walls.

315ACC-0003

This kit includes the power supply cable and mounting hardware necessary to install the FX-2000 in your tractor cab.

324CAS-0065 Carrying Case

This carrying case may be purchased as a part of one of our deluxe moisture meter packages, and fits all prods except the 1986 bale sensor, 830-3 prod, and 830-4 prod. Can also be purchased separately.

MCS-4

This moisture content standard is great for verifying that your F-series hay moisture meter is in calibration. With two electrical resistance values (16% and 22%) to test your meter against, you can be sure that your readings will stand up to the strictest standards of accuracy. The MCS-4 is also available with a letter of certification traceable to NIST.

FX-2000-18-PKG

Manufacturer: Delmhorst Instrument Co
Product ID: FX-2000-18-PKG
Price: $700.81
QTY Add to cart

FX-2000-18-PKG

This state-of-the-art meter is ideal for high-volume producers who need the time-saving convenience of on-the-go monitoring. Whether in the windrow, on-the-go while baling, or in the bale, the FX-2000 gives clear, accurate moisture readings every step of the way!

  • Bright, clear digital display.
  • Can be used for on-the-go moisture monitoring or as a portable meter.
  • In continuous mode:
    • Takes two readings every second.
    • Displays the average and highest of eight accumulated readings.
    • Readings updated every 4 seconds.
    • Built-in back light.
    • Connects to tractor power supply.
  • In portable mode:
    • Averages up to 100 accumulated readings.
    • Displays average and highest of accumulated readings.
  • Moisture Range: 6%-40% on hay.
  • Built-in calibration check.
  • Audible, adjustable alarm alerts you when a pre-selected MC has been reached.
  • Size: 8” x 3” x 1 5/8”.
  • Weight: 10 oz.
  • Rugged construction ensures years of reliable use.
  • Optional sturdy plastic carrying case.
  • 9V battery.
  • 3-year warranty
ELECTRODES
Delmhorst offers a wide assortment of electrodes known throughout the industry for their durability. All Delmhorst electrodes fit any Delmhorst moisture meter. Below are electrodes that are typically used for this model:
1235

10” prod used for testing standard bales. Attaches directly to the connector on top of the meter. Also available in 18” length as 1235/18.

1986 Bale Sensor

For continuous monitoring during baling. Comes with 30’ cable to run from the sensor mounted in the bale chamber to the meter in the cab. May be used with any model, but is recommended to use with Model FX-2000.

Also available as 1986/40 with 40’ cable for larger balers.

830 Series

Prods for testing standard and high density bales (requires H-4 Handle).

Available as:

  • 830-2 – 10” prod
  • 830-3 – 18” prod
  • 830-4 – 36” prod
  • 830-5 – 12” for hops
831 Short Pin Prod

For testing hay in the windrow (requires H-4 Handle).

H-4 Handle

Electrode handle that attaches to the built-in connector on the top of any moisture meter. Can be used with the 830 series prods, 831 short pin disc shaped prod, and 832 long pin disc shaped prod. This is useful for large or high density bales of hay or scrap paper. Two handed operation is recommended over using a prod that connects directly to the top of the meter (like our 1235 series) to minimize stress placed on the meter casing.

2110

Split bale chamber sensor for use with Freeman balers.

ACCESSORIES

1985

The 1985 is a replacement 30ft coaxial cable for the 1986 bale chamber sensor. Also available in 36ft and 40ft lengths as 1985/36 and 1985/40 respectively.

1986/EXTENSION

Extends mounting bolts used when installing 1986 bale chamber sensor. Used for newer balers with thick chamber walls.

315ACC-0003

This kit includes the power supply cable and mounting hardware necessary to install the FX-2000 in your tractor cab.

324CAS-0065 Carrying Case

This carrying case may be purchased as a part of one of our deluxe moisture meter packages, and fits all prods except the 1986 bale sensor, 830-3 prod, and 830-4 prod. Can also be purchased separately.

MCS-4

This moisture content standard is great for verifying that your F-series hay moisture meter is in calibration. With two electrical resistance values (16% and 22%) to test your meter against, you can be sure that your readings will stand up to the strictest standards of accuracy. The MCS-4 is also available with a letter of certification traceable to NIST.

FX-2000-1986

Manufacturer: Delmhorst Instrument Co
Product ID: FX-2000-1986
Price: $542.57
QTY Add to cart

FX-2000-1986

This state-of-the-art meter is ideal for high-volume producers who need the time-saving convenience of on-the-go monitoring. Whether in the windrow, on-the-go while baling, or in the bale, the FX-2000 gives clear, accurate moisture readings every step of the way!

  • Bright, clear digital display.
  • Can be used for on-the-go moisture monitoring or as a portable meter.
  • In continuous mode:
    • Takes two readings every second.
    • Displays the average and highest of eight accumulated readings.
    • Readings updated every 4 seconds.
    • Built-in back light.
    • Connects to tractor power supply.
  • In portable mode:
    • Averages up to 100 accumulated readings.
    • Displays average and highest of accumulated readings.
  • Moisture Range: 6%-40% on hay.
  • Built-in calibration check.
  • Audible, adjustable alarm alerts you when a pre-selected MC has been reached.
  • Size: 8” x 3” x 1 5/8”.
  • Weight: 10 oz.
  • Rugged construction ensures years of reliable use.
  • Optional sturdy plastic carrying case.
  • 9V battery.
  • 3-year warranty
ELECTRODES
Delmhorst offers a wide assortment of electrodes known throughout the industry for their durability. All Delmhorst electrodes fit any Delmhorst moisture meter. Below are electrodes that are typically used for this model:
1235

10” prod used for testing standard bales. Attaches directly to the connector on top of the meter. Also available in 18” length as 1235/18.

1986 Bale Sensor

For continuous monitoring during baling. Comes with 30’ cable to run from the sensor mounted in the bale chamber to the meter in the cab. May be used with any model, but is recommended to use with Model FX-2000.

Also available as 1986/40 with 40’ cable for larger balers.

830 Series

Prods for testing standard and high density bales (requires H-4 Handle).

Available as:

  • 830-2 – 10” prod
  • 830-3 – 18” prod
  • 830-4 – 36” prod
  • 830-5 – 12” for hops
831 Short Pin Prod

For testing hay in the windrow (requires H-4 Handle).

H-4 Handle

Electrode handle that attaches to the built-in connector on the top of any moisture meter. Can be used with the 830 series prods, 831 short pin disc shaped prod, and 832 long pin disc shaped prod. This is useful for large or high density bales of hay or scrap paper. Two handed operation is recommended over using a prod that connects directly to the top of the meter (like our 1235 series) to minimize stress placed on the meter casing.

2110

Split bale chamber sensor for use with Freeman balers.

ACCESSORIES

1985

The 1985 is a replacement 30ft coaxial cable for the 1986 bale chamber sensor. Also available in 36ft and 40ft lengths as 1985/36 and 1985/40 respectively.

1986/EXTENSION

Extends mounting bolts used when installing 1986 bale chamber sensor. Used for newer balers with thick chamber walls.

315ACC-0003

This kit includes the power supply cable and mounting hardware necessary to install the FX-2000 in your tractor cab.

324CAS-0065 Carrying Case

This carrying case may be purchased as a part of one of our deluxe moisture meter packages, and fits all prods except the 1986 bale sensor, 830-3 prod, and 830-4 prod. Can also be purchased separately.

MCS-4

This moisture content standard is great for verifying that your F-series hay moisture meter is in calibration. With two electrical resistance values (16% and 22%) to test your meter against, you can be sure that your readings will stand up to the strictest standards of accuracy. The MCS-4 is also available with a letter of certification traceable to NIST.

FX-2000-1986-40

Manufacturer: Delmhorst Instrument Co
Product ID: FX-2000-1986-40
Price: $542.57
QTY Add to cart

FX-2000-1986-40

This state-of-the-art meter is ideal for high-volume producers who need the time-saving convenience of on-the-go monitoring. Whether in the windrow, on-the-go while baling, or in the bale, the FX-2000 gives clear, accurate moisture readings every step of the way!

  • Bright, clear digital display.
  • Can be used for on-the-go moisture monitoring or as a portable meter.
  • In continuous mode:
    • Takes two readings every second.
    • Displays the average and highest of eight accumulated readings.
    • Readings updated every 4 seconds.
    • Built-in back light.
    • Connects to tractor power supply.
  • In portable mode:
    • Averages up to 100 accumulated readings.
    • Displays average and highest of accumulated readings.
  • Moisture Range: 6%-40% on hay.
  • Built-in calibration check.
  • Audible, adjustable alarm alerts you when a pre-selected MC has been reached.
  • Size: 8” x 3” x 1 5/8”.
  • Weight: 10 oz.
  • Rugged construction ensures years of reliable use.
  • Optional sturdy plastic carrying case.
  • 9V battery.
  • 3-year warranty
ELECTRODES
Delmhorst offers a wide assortment of electrodes known throughout the industry for their durability. All Delmhorst electrodes fit any Delmhorst moisture meter. Below are electrodes that are typically used for this model:
1235

10” prod used for testing standard bales. Attaches directly to the connector on top of the meter. Also available in 18” length as 1235/18.

1986 Bale Sensor

For continuous monitoring during baling. Comes with 30’ cable to run from the sensor mounted in the bale chamber to the meter in the cab. May be used with any model, but is recommended to use with Model FX-2000.

Also available as 1986/40 with 40’ cable for larger balers.

830 Series

Prods for testing standard and high density bales (requires H-4 Handle).

Available as:

  • 830-2 – 10” prod
  • 830-3 – 18” prod
  • 830-4 – 36” prod
  • 830-5 – 12” for hops
831 Short Pin Prod

For testing hay in the windrow (requires H-4 Handle).

H-4 Handle

Electrode handle that attaches to the built-in connector on the top of any moisture meter. Can be used with the 830 series prods, 831 short pin disc shaped prod, and 832 long pin disc shaped prod. This is useful for large or high density bales of hay or scrap paper. Two handed operation is recommended over using a prod that connects directly to the top of the meter (like our 1235 series) to minimize stress placed on the meter casing.

2110

Split bale chamber sensor for use with Freeman balers.

ACCESSORIES

1985

The 1985 is a replacement 30ft coaxial cable for the 1986 bale chamber sensor. Also available in 36ft and 40ft lengths as 1985/36 and 1985/40 respectively.

1986/EXTENSION

Extends mounting bolts used when installing 1986 bale chamber sensor. Used for newer balers with thick chamber walls.

315ACC-0003

This kit includes the power supply cable and mounting hardware necessary to install the FX-2000 in your tractor cab.

324CAS-0065 Carrying Case

This carrying case may be purchased as a part of one of our deluxe moisture meter packages, and fits all prods except the 1986 bale sensor, 830-3 prod, and 830-4 prod. Can also be purchased separately.

MCS-4

This moisture content standard is great for verifying that your F-series hay moisture meter is in calibration. With two electrical resistance values (16% and 22%) to test your meter against, you can be sure that your readings will stand up to the strictest standards of accuracy. The MCS-4 is also available with a letter of certification traceable to NIST.

FX-2000-2110

Manufacturer: Delmhorst Instrument Co
Product ID: FX-2000-2110
Price: $542.57
QTY Add to cart

FX-2000-2110

This state-of-the-art meter is ideal for high-volume producers who need the time-saving convenience of on-the-go monitoring. Whether in the windrow, on-the-go while baling, or in the bale, the FX-2000 gives clear, accurate moisture readings every step of the way!

  • Bright, clear digital display.
  • Can be used for on-the-go moisture monitoring or as a portable meter.
  • In continuous mode:
    • Takes two readings every second.
    • Displays the average and highest of eight accumulated readings.
    • Readings updated every 4 seconds.
    • Built-in back light.
    • Connects to tractor power supply.
  • In portable mode:
    • Averages up to 100 accumulated readings.
    • Displays average and highest of accumulated readings.
  • Moisture Range: 6%-40% on hay.
  • Built-in calibration check.
  • Audible, adjustable alarm alerts you when a pre-selected MC has been reached.
  • Size: 8” x 3” x 1 5/8”.
  • Weight: 10 oz.
  • Rugged construction ensures years of reliable use.
  • Optional sturdy plastic carrying case.
  • 9V battery.
  • 3-year warranty
ELECTRODES
Delmhorst offers a wide assortment of electrodes known throughout the industry for their durability. All Delmhorst electrodes fit any Delmhorst moisture meter. Below are electrodes that are typically used for this model:
1235

10” prod used for testing standard bales. Attaches directly to the connector on top of the meter. Also available in 18” length as 1235/18.

1986 Bale Sensor

For continuous monitoring during baling. Comes with 30’ cable to run from the sensor mounted in the bale chamber to the meter in the cab. May be used with any model, but is recommended to use with Model FX-2000.

Also available as 1986/40 with 40’ cable for larger balers.

830 Series

Prods for testing standard and high density bales (requires H-4 Handle).

Available as:

  • 830-2 – 10” prod
  • 830-3 – 18” prod
  • 830-4 – 36” prod
  • 830-5 – 12” for hops
831 Short Pin Prod

For testing hay in the windrow (requires H-4 Handle).

H-4 Handle

Electrode handle that attaches to the built-in connector on the top of any moisture meter. Can be used with the 830 series prods, 831 short pin disc shaped prod, and 832 long pin disc shaped prod. This is useful for large or high density bales of hay or scrap paper. Two handed operation is recommended over using a prod that connects directly to the top of the meter (like our 1235 series) to minimize stress placed on the meter casing.

2110

Split bale chamber sensor for use with Freeman balers.

ACCESSORIES

1985

The 1985 is a replacement 30ft coaxial cable for the 1986 bale chamber sensor. Also available in 36ft and 40ft lengths as 1985/36 and 1985/40 respectively.

1986/EXTENSION

Extends mounting bolts used when installing 1986 bale chamber sensor. Used for newer balers with thick chamber walls.

315ACC-0003

This kit includes the power supply cable and mounting hardware necessary to install the FX-2000 in your tractor cab.

324CAS-0065 Carrying Case

This carrying case may be purchased as a part of one of our deluxe moisture meter packages, and fits all prods except the 1986 bale sensor, 830-3 prod, and 830-4 prod. Can also be purchased separately.

MCS-4

This moisture content standard is great for verifying that your F-series hay moisture meter is in calibration. With two electrical resistance values (16% and 22%) to test your meter against, you can be sure that your readings will stand up to the strictest standards of accuracy. The MCS-4 is also available with a letter of certification traceable to NIST.

FX-2000-2110PKG

Manufacturer: Delmhorst Instrument Co
Product ID: FX-2000-2110PKG
Price: $700.81
QTY Add to cart

FX-2000-2110PKG

This state-of-the-art meter is ideal for high-volume producers who need the time-saving convenience of on-the-go monitoring. Whether in the windrow, on-the-go while baling, or in the bale, the FX-2000 gives clear, accurate moisture readings every step of the way!

  • Bright, clear digital display.
  • Can be used for on-the-go moisture monitoring or as a portable meter.
  • In continuous mode:
    • Takes two readings every second.
    • Displays the average and highest of eight accumulated readings.
    • Readings updated every 4 seconds.
    • Built-in back light.
    • Connects to tractor power supply.
  • In portable mode:
    • Averages up to 100 accumulated readings.
    • Displays average and highest of accumulated readings.
  • Moisture Range: 6%-40% on hay.
  • Built-in calibration check.
  • Audible, adjustable alarm alerts you when a pre-selected MC has been reached.
  • Size: 8” x 3” x 1 5/8”.
  • Weight: 10 oz.
  • Rugged construction ensures years of reliable use.
  • Optional sturdy plastic carrying case.
  • 9V battery.
  • 3-year warranty
ELECTRODES
Delmhorst offers a wide assortment of electrodes known throughout the industry for their durability. All Delmhorst electrodes fit any Delmhorst moisture meter. Below are electrodes that are typically used for this model:
1235

10” prod used for testing standard bales. Attaches directly to the connector on top of the meter. Also available in 18” length as 1235/18.

1986 Bale Sensor

For continuous monitoring during baling. Comes with 30’ cable to run from the sensor mounted in the bale chamber to the meter in the cab. May be used with any model, but is recommended to use with Model FX-2000.

Also available as 1986/40 with 40’ cable for larger balers.

830 Series

Prods for testing standard and high density bales (requires H-4 Handle).

Available as:

  • 830-2 – 10” prod
  • 830-3 – 18” prod
  • 830-4 – 36” prod
  • 830-5 – 12” for hops
831 Short Pin Prod

For testing hay in the windrow (requires H-4 Handle).

H-4 Handle

Electrode handle that attaches to the built-in connector on the top of any moisture meter. Can be used with the 830 series prods, 831 short pin disc shaped prod, and 832 long pin disc shaped prod. This is useful for large or high density bales of hay or scrap paper. Two handed operation is recommended over using a prod that connects directly to the top of the meter (like our 1235 series) to minimize stress placed on the meter casing.

2110

Split bale chamber sensor for use with Freeman balers.

ACCESSORIES

1985

The 1985 is a replacement 30ft coaxial cable for the 1986 bale chamber sensor. Also available in 36ft and 40ft lengths as 1985/36 and 1985/40 respectively.

1986/EXTENSION

Extends mounting bolts used when installing 1986 bale chamber sensor. Used for newer balers with thick chamber walls.

315ACC-0003

This kit includes the power supply cable and mounting hardware necessary to install the FX-2000 in your tractor cab.

324CAS-0065 Carrying Case

This carrying case may be purchased as a part of one of our deluxe moisture meter packages, and fits all prods except the 1986 bale sensor, 830-3 prod, and 830-4 prod. Can also be purchased separately.

MCS-4

This moisture content standard is great for verifying that your F-series hay moisture meter is in calibration. With two electrical resistance values (16% and 22%) to test your meter against, you can be sure that your readings will stand up to the strictest standards of accuracy. The MCS-4 is also available with a letter of certification traceable to NIST.

FX-2000-36-PKG

Manufacturer: Delmhorst Instrument Co
Product ID: FX-2000-36-PKG
Price: $716.22
QTY Add to cart

FX-2000-36-PKG

This state-of-the-art meter is ideal for high-volume producers who need the time-saving convenience of on-the-go monitoring. Whether in the windrow, on-the-go while baling, or in the bale, the FX-2000 gives clear, accurate moisture readings every step of the way!

  • Bright, clear digital display.
  • Can be used for on-the-go moisture monitoring or as a portable meter.
  • In continuous mode:
    • Takes two readings every second.
    • Displays the average and highest of eight accumulated readings.
    • Readings updated every 4 seconds.
    • Built-in back light.
    • Connects to tractor power supply.
  • In portable mode:
    • Averages up to 100 accumulated readings.
    • Displays average and highest of accumulated readings.
  • Moisture Range: 6%-40% on hay.
  • Built-in calibration check.
  • Audible, adjustable alarm alerts you when a pre-selected MC has been reached.
  • Size: 8” x 3” x 1 5/8”.
  • Weight: 10 oz.
  • Rugged construction ensures years of reliable use.
  • Optional sturdy plastic carrying case.
  • 9V battery.
  • 3-year warranty
ELECTRODES
Delmhorst offers a wide assortment of electrodes known throughout the industry for their durability. All Delmhorst electrodes fit any Delmhorst moisture meter. Below are electrodes that are typically used for this model:
1235

10” prod used for testing standard bales. Attaches directly to the connector on top of the meter. Also available in 18” length as 1235/18.

1986 Bale Sensor

For continuous monitoring during baling. Comes with 30’ cable to run from the sensor mounted in the bale chamber to the meter in the cab. May be used with any model, but is recommended to use with Model FX-2000.

Also available as 1986/40 with 40’ cable for larger balers.

830 Series

Prods for testing standard and high density bales (requires H-4 Handle).

Available as:

  • 830-2 – 10” prod
  • 830-3 – 18” prod
  • 830-4 – 36” prod
  • 830-5 – 12” for hops
831 Short Pin Prod

For testing hay in the windrow (requires H-4 Handle).

H-4 Handle

Electrode handle that attaches to the built-in connector on the top of any moisture meter. Can be used with the 830 series prods, 831 short pin disc shaped prod, and 832 long pin disc shaped prod. This is useful for large or high density bales of hay or scrap paper. Two handed operation is recommended over using a prod that connects directly to the top of the meter (like our 1235 series) to minimize stress placed on the meter casing.

2110

Split bale chamber sensor for use with Freeman balers.

ACCESSORIES

1985

The 1985 is a replacement 30ft coaxial cable for the 1986 bale chamber sensor. Also available in 36ft and 40ft lengths as 1985/36 and 1985/40 respectively.

1986/EXTENSION

Extends mounting bolts used when installing 1986 bale chamber sensor. Used for newer balers with thick chamber walls.

315ACC-0003

This kit includes the power supply cable and mounting hardware necessary to install the FX-2000 in your tractor cab.

324CAS-0065 Carrying Case

This carrying case may be purchased as a part of one of our deluxe moisture meter packages, and fits all prods except the 1986 bale sensor, 830-3 prod, and 830-4 prod. Can also be purchased separately.

MCS-4

This moisture content standard is great for verifying that your F-series hay moisture meter is in calibration. With two electrical resistance values (16% and 22%) to test your meter against, you can be sure that your readings will stand up to the strictest standards of accuracy. The MCS-4 is also available with a letter of certification traceable to NIST.

FX-2000-AA-PKG

Manufacturer: Delmhorst Instrument Co
Product ID: FX-2000-AA-PKG
Price: $600.61
QTY Add to cart

FX-2000-AA-PKG

This state-of-the-art meter is ideal for high-volume producers who need the time-saving convenience of on-the-go monitoring. Whether in the windrow, on-the-go while baling, or in the bale, the FX-2000 gives clear, accurate moisture readings every step of the way!

  • Bright, clear digital display.
  • Can be used for on-the-go moisture monitoring or as a portable meter.
  • In continuous mode:
    • Takes two readings every second.
    • Displays the average and highest of eight accumulated readings.
    • Readings updated every 4 seconds.
    • Built-in back light.
    • Connects to tractor power supply.
  • In portable mode:
    • Averages up to 100 accumulated readings.
    • Displays average and highest of accumulated readings.
  • Moisture Range: 6%-40% on hay.
  • Built-in calibration check.
  • Audible, adjustable alarm alerts you when a pre-selected MC has been reached.
  • Size: 8” x 3” x 1 5/8”.
  • Weight: 10 oz.
  • Rugged construction ensures years of reliable use.
  • Optional sturdy plastic carrying case.
  • 9V battery.
  • 3-year warranty
ELECTRODES
Delmhorst offers a wide assortment of electrodes known throughout the industry for their durability. All Delmhorst electrodes fit any Delmhorst moisture meter. Below are electrodes that are typically used for this model:
1235

10” prod used for testing standard bales. Attaches directly to the connector on top of the meter. Also available in 18” length as 1235/18.

1986 Bale Sensor

For continuous monitoring during baling. Comes with 30’ cable to run from the sensor mounted in the bale chamber to the meter in the cab. May be used with any model, but is recommended to use with Model FX-2000.

Also available as 1986/40 with 40’ cable for larger balers.

830 Series

Prods for testing standard and high density bales (requires H-4 Handle).

Available as:

  • 830-2 – 10” prod
  • 830-3 – 18” prod
  • 830-4 – 36” prod
  • 830-5 – 12” for hops
831 Short Pin Prod

For testing hay in the windrow (requires H-4 Handle).

H-4 Handle

Electrode handle that attaches to the built-in connector on the top of any moisture meter. Can be used with the 830 series prods, 831 short pin disc shaped prod, and 832 long pin disc shaped prod. This is useful for large or high density bales of hay or scrap paper. Two handed operation is recommended over using a prod that connects directly to the top of the meter (like our 1235 series) to minimize stress placed on the meter casing.

2110

Split bale chamber sensor for use with Freeman balers.

ACCESSORIES

1985

The 1985 is a replacement 30ft coaxial cable for the 1986 bale chamber sensor. Also available in 36ft and 40ft lengths as 1985/36 and 1985/40 respectively.

1986/EXTENSION

Extends mounting bolts used when installing 1986 bale chamber sensor. Used for newer balers with thick chamber walls.

315ACC-0003

This kit includes the power supply cable and mounting hardware necessary to install the FX-2000 in your tractor cab.

324CAS-0065 Carrying Case

This carrying case may be purchased as a part of one of our deluxe moisture meter packages, and fits all prods except the 1986 bale sensor, 830-3 prod, and 830-4 prod. Can also be purchased separately.

MCS-4

This moisture content standard is great for verifying that your F-series hay moisture meter is in calibration. With two electrical resistance values (16% and 22%) to test your meter against, you can be sure that your readings will stand up to the strictest standards of accuracy. The MCS-4 is also available with a letter of certification traceable to NIST.

FX-2000-BBS-PKG

Manufacturer: Delmhorst Instrument Co
Product ID: FX-2000-BBS-PKG
Price: $616.55
QTY Add to cart

FX-2000-BBS-PKG

This state-of-the-art meter is ideal for high-volume producers who need the time-saving convenience of on-the-go monitoring. Whether in the windrow, on-the-go while baling, or in the bale, the FX-2000 gives clear, accurate moisture readings every step of the way!

  • Bright, clear digital display.
  • Can be used for on-the-go moisture monitoring or as a portable meter.
  • In continuous mode:
    • Takes two readings every second.
    • Displays the average and highest of eight accumulated readings.
    • Readings updated every 4 seconds.
    • Built-in back light.
    • Connects to tractor power supply.
  • In portable mode:
    • Averages up to 100 accumulated readings.
    • Displays average and highest of accumulated readings.
  • Moisture Range: 6%-40% on hay.
  • Built-in calibration check.
  • Audible, adjustable alarm alerts you when a pre-selected MC has been reached.
  • Size: 8” x 3” x 1 5/8”.
  • Weight: 10 oz.
  • Rugged construction ensures years of reliable use.
  • Optional sturdy plastic carrying case.
  • 9V battery.
  • 3-year warranty
ELECTRODES
Delmhorst offers a wide assortment of electrodes known throughout the industry for their durability. All Delmhorst electrodes fit any Delmhorst moisture meter. Below are electrodes that are typically used for this model:
1235

10” prod used for testing standard bales. Attaches directly to the connector on top of the meter. Also available in 18” length as 1235/18.

1986 Bale Sensor

For continuous monitoring during baling. Comes with 30’ cable to run from the sensor mounted in the bale chamber to the meter in the cab. May be used with any model, but is recommended to use with Model FX-2000.

Also available as 1986/40 with 40’ cable for larger balers.

830 Series

Prods for testing standard and high density bales (requires H-4 Handle).

Available as:

  • 830-2 – 10” prod
  • 830-3 – 18” prod
  • 830-4 – 36” prod
  • 830-5 – 12” for hops
831 Short Pin Prod

For testing hay in the windrow (requires H-4 Handle).

H-4 Handle

Electrode handle that attaches to the built-in connector on the top of any moisture meter. Can be used with the 830 series prods, 831 short pin disc shaped prod, and 832 long pin disc shaped prod. This is useful for large or high density bales of hay or scrap paper. Two handed operation is recommended over using a prod that connects directly to the top of the meter (like our 1235 series) to minimize stress placed on the meter casing.

2110

Split bale chamber sensor for use with Freeman balers.

ACCESSORIES

1985

The 1985 is a replacement 30ft coaxial cable for the 1986 bale chamber sensor. Also available in 36ft and 40ft lengths as 1985/36 and 1985/40 respectively.

1986/EXTENSION

Extends mounting bolts used when installing 1986 bale chamber sensor. Used for newer balers with thick chamber walls.

315ACC-0003

This kit includes the power supply cable and mounting hardware necessary to install the FX-2000 in your tractor cab.

324CAS-0065 Carrying Case

This carrying case may be purchased as a part of one of our deluxe moisture meter packages, and fits all prods except the 1986 bale sensor, 830-3 prod, and 830-4 prod. Can also be purchased separately.

MCS-4

This moisture content standard is great for verifying that your F-series hay moisture meter is in calibration. With two electrical resistance values (16% and 22%) to test your meter against, you can be sure that your readings will stand up to the strictest standards of accuracy. The MCS-4 is also available with a letter of certification traceable to NIST.

FX-2000-DE-PKG

Manufacturer: Delmhorst Instrument Co
Product ID: FX-2000-DE-PKG
Price: $679.75
QTY Add to cart

FX-2000-DE-PKG

This state-of-the-art meter is ideal for high-volume producers who need the time-saving convenience of on-the-go monitoring. Whether in the windrow, on-the-go while baling, or in the bale, the FX-2000 gives clear, accurate moisture readings every step of the way!

  • Bright, clear digital display.
  • Can be used for on-the-go moisture monitoring or as a portable meter.
  • In continuous mode:
    • Takes two readings every second.
    • Displays the average and highest of eight accumulated readings.
    • Readings updated every 4 seconds.
    • Built-in back light.
    • Connects to tractor power supply.
  • In portable mode:
    • Averages up to 100 accumulated readings.
    • Displays average and highest of accumulated readings.
  • Moisture Range: 6%-40% on hay.
  • Built-in calibration check.
  • Audible, adjustable alarm alerts you when a pre-selected MC has been reached.
  • Size: 8” x 3” x 1 5/8”.
  • Weight: 10 oz.
  • Rugged construction ensures years of reliable use.
  • Optional sturdy plastic carrying case.
  • 9V battery.
  • 3-year warranty
ELECTRODES
Delmhorst offers a wide assortment of electrodes known throughout the industry for their durability. All Delmhorst electrodes fit any Delmhorst moisture meter. Below are electrodes that are typically used for this model:
1235

10” prod used for testing standard bales. Attaches directly to the connector on top of the meter. Also available in 18” length as 1235/18.

1986 Bale Sensor

For continuous monitoring during baling. Comes with 30’ cable to run from the sensor mounted in the bale chamber to the meter in the cab. May be used with any model, but is recommended to use with Model FX-2000.

Also available as 1986/40 with 40’ cable for larger balers.

830 Series

Prods for testing standard and high density bales (requires H-4 Handle).

Available as:

  • 830-2 – 10” prod
  • 830-3 – 18” prod
  • 830-4 – 36” prod
  • 830-5 – 12” for hops
831 Short Pin Prod

For testing hay in the windrow (requires H-4 Handle).

H-4 Handle

Electrode handle that attaches to the built-in connector on the top of any moisture meter. Can be used with the 830 series prods, 831 short pin disc shaped prod, and 832 long pin disc shaped prod. This is useful for large or high density bales of hay or scrap paper. Two handed operation is recommended over using a prod that connects directly to the top of the meter (like our 1235 series) to minimize stress placed on the meter casing.

2110

Split bale chamber sensor for use with Freeman balers.

ACCESSORIES

1985

The 1985 is a replacement 30ft coaxial cable for the 1986 bale chamber sensor. Also available in 36ft and 40ft lengths as 1985/36 and 1985/40 respectively.

1986/EXTENSION

Extends mounting bolts used when installing 1986 bale chamber sensor. Used for newer balers with thick chamber walls.

315ACC-0003

This kit includes the power supply cable and mounting hardware necessary to install the FX-2000 in your tractor cab.

324CAS-0065 Carrying Case

This carrying case may be purchased as a part of one of our deluxe moisture meter packages, and fits all prods except the 1986 bale sensor, 830-3 prod, and 830-4 prod. Can also be purchased separately.

MCS-4

This moisture content standard is great for verifying that your F-series hay moisture meter is in calibration. With two electrical resistance values (16% and 22%) to test your meter against, you can be sure that your readings will stand up to the strictest standards of accuracy. The MCS-4 is also available with a letter of certification traceable to NIST.

FX-2000-HT-PKG

Manufacturer: Delmhorst Instrument Co
Product ID: FX-2000-HT-PKG
Price: $700.81
QTY Add to cart

FX-2000-HT-PKG

This state-of-the-art meter is ideal for high-volume producers who need the time-saving convenience of on-the-go monitoring. Whether in the windrow, on-the-go while baling, or in the bale, the FX-2000 gives clear, accurate moisture readings every step of the way!

  • Bright, clear digital display.
  • Can be used for on-the-go moisture monitoring or as a portable meter.
  • In continuous mode:
    • Takes two readings every second.
    • Displays the average and highest of eight accumulated readings.
    • Readings updated every 4 seconds.
    • Built-in back light.
    • Connects to tractor power supply.
  • In portable mode:
    • Averages up to 100 accumulated readings.
    • Displays average and highest of accumulated readings.
  • Moisture Range: 6%-40% on hay.
  • Built-in calibration check.
  • Audible, adjustable alarm alerts you when a pre-selected MC has been reached.
  • Size: 8” x 3” x 1 5/8”.
  • Weight: 10 oz.
  • Rugged construction ensures years of reliable use.
  • Optional sturdy plastic carrying case.
  • 9V battery.
  • 3-year warranty
ELECTRODES
Delmhorst offers a wide assortment of electrodes known throughout the industry for their durability. All Delmhorst electrodes fit any Delmhorst moisture meter. Below are electrodes that are typically used for this model:
1235

10” prod used for testing standard bales. Attaches directly to the connector on top of the meter. Also available in 18” length as 1235/18.

1986 Bale Sensor

For continuous monitoring during baling. Comes with 30’ cable to run from the sensor mounted in the bale chamber to the meter in the cab. May be used with any model, but is recommended to use with Model FX-2000.

Also available as 1986/40 with 40’ cable for larger balers.

830 Series

Prods for testing standard and high density bales (requires H-4 Handle).

Available as:

  • 830-2 – 10” prod
  • 830-3 – 18” prod
  • 830-4 – 36” prod
  • 830-5 – 12” for hops
831 Short Pin Prod

For testing hay in the windrow (requires H-4 Handle).

H-4 Handle

Electrode handle that attaches to the built-in connector on the top of any moisture meter. Can be used with the 830 series prods, 831 short pin disc shaped prod, and 832 long pin disc shaped prod. This is useful for large or high density bales of hay or scrap paper. Two handed operation is recommended over using a prod that connects directly to the top of the meter (like our 1235 series) to minimize stress placed on the meter casing.

2110

Split bale chamber sensor for use with Freeman balers.

ACCESSORIES

1985

The 1985 is a replacement 30ft coaxial cable for the 1986 bale chamber sensor. Also available in 36ft and 40ft lengths as 1985/36 and 1985/40 respectively.

1986/EXTENSION

Extends mounting bolts used when installing 1986 bale chamber sensor. Used for newer balers with thick chamber walls.

315ACC-0003

This kit includes the power supply cable and mounting hardware necessary to install the FX-2000 in your tractor cab.

324CAS-0065 Carrying Case

This carrying case may be purchased as a part of one of our deluxe moisture meter packages, and fits all prods except the 1986 bale sensor, 830-3 prod, and 830-4 prod. Can also be purchased separately.

MCS-4

This moisture content standard is great for verifying that your F-series hay moisture meter is in calibration. With two electrical resistance values (16% and 22%) to test your meter against, you can be sure that your readings will stand up to the strictest standards of accuracy. The MCS-4 is also available with a letter of certification traceable to NIST.

FX-2000-NB-PKG

Manufacturer: Delmhorst Instrument Co
Product ID: FX-2000-NB-PKG
Price: $700.81
QTY Add to cart

FX-2000-NB-PKG

This state-of-the-art meter is ideal for high-volume producers who need the time-saving convenience of on-the-go monitoring. Whether in the windrow, on-the-go while baling, or in the bale, the FX-2000 gives clear, accurate moisture readings every step of the way!

  • Bright, clear digital display.
  • Can be used for on-the-go moisture monitoring or as a portable meter.
  • In continuous mode:
    • Takes two readings every second.
    • Displays the average and highest of eight accumulated readings.
    • Readings updated every 4 seconds.
    • Built-in back light.
    • Connects to tractor power supply.
  • In portable mode:
    • Averages up to 100 accumulated readings.
    • Displays average and highest of accumulated readings.
  • Moisture Range: 6%-40% on hay.
  • Built-in calibration check.
  • Audible, adjustable alarm alerts you when a pre-selected MC has been reached.
  • Size: 8” x 3” x 1 5/8”.
  • Weight: 10 oz.
  • Rugged construction ensures years of reliable use.
  • Optional sturdy plastic carrying case.
  • 9V battery.
  • 3-year warranty
ELECTRODES
Delmhorst offers a wide assortment of electrodes known throughout the industry for their durability. All Delmhorst electrodes fit any Delmhorst moisture meter. Below are electrodes that are typically used for this model:
1235

10” prod used for testing standard bales. Attaches directly to the connector on top of the meter. Also available in 18” length as 1235/18.

1986 Bale Sensor

For continuous monitoring during baling. Comes with 30’ cable to run from the sensor mounted in the bale chamber to the meter in the cab. May be used with any model, but is recommended to use with Model FX-2000.

Also available as 1986/40 with 40’ cable for larger balers.

830 Series

Prods for testing standard and high density bales (requires H-4 Handle).

Available as:

  • 830-2 – 10” prod
  • 830-3 – 18” prod
  • 830-4 – 36” prod
  • 830-5 – 12” for hops
831 Short Pin Prod

For testing hay in the windrow (requires H-4 Handle).

H-4 Handle

Electrode handle that attaches to the built-in connector on the top of any moisture meter. Can be used with the 830 series prods, 831 short pin disc shaped prod, and 832 long pin disc shaped prod. This is useful for large or high density bales of hay or scrap paper. Two handed operation is recommended over using a prod that connects directly to the top of the meter (like our 1235 series) to minimize stress placed on the meter casing.

2110

Split bale chamber sensor for use with Freeman balers.

ACCESSORIES

1985

The 1985 is a replacement 30ft coaxial cable for the 1986 bale chamber sensor. Also available in 36ft and 40ft lengths as 1985/36 and 1985/40 respectively.

1986/EXTENSION

Extends mounting bolts used when installing 1986 bale chamber sensor. Used for newer balers with thick chamber walls.

315ACC-0003

This kit includes the power supply cable and mounting hardware necessary to install the FX-2000 in your tractor cab.

324CAS-0065 Carrying Case

This carrying case may be purchased as a part of one of our deluxe moisture meter packages, and fits all prods except the 1986 bale sensor, 830-3 prod, and 830-4 prod. Can also be purchased separately.

MCS-4

This moisture content standard is great for verifying that your F-series hay moisture meter is in calibration. With two electrical resistance values (16% and 22%) to test your meter against, you can be sure that your readings will stand up to the strictest standards of accuracy. The MCS-4 is also available with a letter of certification traceable to NIST.

FX-2000-PKG

Manufacturer: Delmhorst Instrument Co
Product ID: FX-2000-PKG
Price: $700.81
QTY Add to cart

FX-2000-PKG

This state-of-the-art meter is ideal for high-volume producers who need the time-saving convenience of on-the-go monitoring. Whether in the windrow, on-the-go while baling, or in the bale, the FX-2000 gives clear, accurate moisture readings every step of the way!

  • Bright, clear digital display.
  • Can be used for on-the-go moisture monitoring or as a portable meter.
  • In continuous mode:
    • Takes two readings every second.
    • Displays the average and highest of eight accumulated readings.
    • Readings updated every 4 seconds.
    • Built-in back light.
    • Connects to tractor power supply.
  • In portable mode:
    • Averages up to 100 accumulated readings.
    • Displays average and highest of accumulated readings.
  • Moisture Range: 6%-40% on hay.
  • Built-in calibration check.
  • Audible, adjustable alarm alerts you when a pre-selected MC has been reached.
  • Size: 8” x 3” x 1 5/8”.
  • Weight: 10 oz.
  • Rugged construction ensures years of reliable use.
  • Optional sturdy plastic carrying case.
  • 9V battery.
  • 3-year warranty
ELECTRODES
Delmhorst offers a wide assortment of electrodes known throughout the industry for their durability. All Delmhorst electrodes fit any Delmhorst moisture meter. Below are electrodes that are typically used for this model:
1235

10” prod used for testing standard bales. Attaches directly to the connector on top of the meter. Also available in 18” length as 1235/18.

1986 Bale Sensor

For continuous monitoring during baling. Comes with 30’ cable to run from the sensor mounted in the bale chamber to the meter in the cab. May be used with any model, but is recommended to use with Model FX-2000.

Also available as 1986/40 with 40’ cable for larger balers.

830 Series

Prods for testing standard and high density bales (requires H-4 Handle).

Available as:

  • 830-2 – 10” prod
  • 830-3 – 18” prod
  • 830-4 – 36” prod
  • 830-5 – 12” for hops
831 Short Pin Prod

For testing hay in the windrow (requires H-4 Handle).

H-4 Handle

Electrode handle that attaches to the built-in connector on the top of any moisture meter. Can be used with the 830 series prods, 831 short pin disc shaped prod, and 832 long pin disc shaped prod. This is useful for large or high density bales of hay or scrap paper. Two handed operation is recommended over using a prod that connects directly to the top of the meter (like our 1235 series) to minimize stress placed on the meter casing.

2110

Split bale chamber sensor for use with Freeman balers.

ACCESSORIES

1985

The 1985 is a replacement 30ft coaxial cable for the 1986 bale chamber sensor. Also available in 36ft and 40ft lengths as 1985/36 and 1985/40 respectively.

1986/EXTENSION

Extends mounting bolts used when installing 1986 bale chamber sensor. Used for newer balers with thick chamber walls.

315ACC-0003

This kit includes the power supply cable and mounting hardware necessary to install the FX-2000 in your tractor cab.

324CAS-0065 Carrying Case

This carrying case may be purchased as a part of one of our deluxe moisture meter packages, and fits all prods except the 1986 bale sensor, 830-3 prod, and 830-4 prod. Can also be purchased separately.

MCS-4

This moisture content standard is great for verifying that your F-series hay moisture meter is in calibration. With two electrical resistance values (16% and 22%) to test your meter against, you can be sure that your readings will stand up to the strictest standards of accuracy. The MCS-4 is also available with a letter of certification traceable to NIST.

FX-2000W-PS

Manufacturer: Delmhorst Instrument Co
Product ID: FX-2000W-PS
Price: $442.37
QTY Add to cart

FX-2000W-PS

This state-of-the-art meter is ideal for high-volume producers who need the time-saving convenience of on-the-go monitoring. Whether in the windrow, on-the-go while baling, or in the bale, the FX-2000 gives clear, accurate moisture readings every step of the way!

  • Bright, clear digital display.
  • Can be used for on-the-go moisture monitoring or as a portable meter.
  • In continuous mode:
    • Takes two readings every second.
    • Displays the average and highest of eight accumulated readings.
    • Readings updated every 4 seconds.
    • Built-in back light.
    • Connects to tractor power supply.
  • In portable mode:
    • Averages up to 100 accumulated readings.
    • Displays average and highest of accumulated readings.
  • Moisture Range: 6%-40% on hay.
  • Built-in calibration check.
  • Audible, adjustable alarm alerts you when a pre-selected MC has been reached.
  • Size: 8” x 3” x 1 5/8”.
  • Weight: 10 oz.
  • Rugged construction ensures years of reliable use.
  • Optional sturdy plastic carrying case.
  • 9V battery.
  • 3-year warranty
ELECTRODES
Delmhorst offers a wide assortment of electrodes known throughout the industry for their durability. All Delmhorst electrodes fit any Delmhorst moisture meter. Below are electrodes that are typically used for this model:
1235

10” prod used for testing standard bales. Attaches directly to the connector on top of the meter. Also available in 18” length as 1235/18.

1986 Bale Sensor

For continuous monitoring during baling. Comes with 30’ cable to run from the sensor mounted in the bale chamber to the meter in the cab. May be used with any model, but is recommended to use with Model FX-2000.

Also available as 1986/40 with 40’ cable for larger balers.

830 Series

Prods for testing standard and high density bales (requires H-4 Handle).

Available as:

  • 830-2 – 10” prod
  • 830-3 – 18” prod
  • 830-4 – 36” prod
  • 830-5 – 12” for hops
831 Short Pin Prod

For testing hay in the windrow (requires H-4 Handle).

H-4 Handle

Electrode handle that attaches to the built-in connector on the top of any moisture meter. Can be used with the 830 series prods, 831 short pin disc shaped prod, and 832 long pin disc shaped prod. This is useful for large or high density bales of hay or scrap paper. Two handed operation is recommended over using a prod that connects directly to the top of the meter (like our 1235 series) to minimize stress placed on the meter casing.

2110

Split bale chamber sensor for use with Freeman balers.

ACCESSORIES

1985

The 1985 is a replacement 30ft coaxial cable for the 1986 bale chamber sensor. Also available in 36ft and 40ft lengths as 1985/36 and 1985/40 respectively.

1986/EXTENSION

Extends mounting bolts used when installing 1986 bale chamber sensor. Used for newer balers with thick chamber walls.

315ACC-0003

This kit includes the power supply cable and mounting hardware necessary to install the FX-2000 in your tractor cab.

324CAS-0065 Carrying Case

This carrying case may be purchased as a part of one of our deluxe moisture meter packages, and fits all prods except the 1986 bale sensor, 830-3 prod, and 830-4 prod. Can also be purchased separately.

MCS-4

This moisture content standard is great for verifying that your F-series hay moisture meter is in calibration. With two electrical resistance values (16% and 22%) to test your meter against, you can be sure that your readings will stand up to the strictest standards of accuracy. The MCS-4 is also available with a letter of certification traceable to NIST.

G-34-JB-PKG

Manufacturer: Delmhorst Instrument Co
Product ID: G-34-JB-PKG
Price: $663.82
QTY Add to cart

G-34-JB-PKG

The G-34 lets you easily check moisture levels in baled hops to assure high-quality harvest and safe storage. The large analog display and built-in battery check make this a favorite among hop growers worldwide.

  • Easy-to-read analog display
  • Moisture Range: 7%-14% on hops.
  • Built-in battery and calibration check.
  • Auto-shutoff timer saves battery life.
  • Size: 7 3/8” x 3 7/8” x 2 3/4”.
  • Weight: 1 lb.
  • Rugged construction ensures years of reliable use.
  • Sturdy plastic carrying case.
  • 9V battery.
  • 1-year warranty.
ELECTRODES
Delmhorst offers a wide assortment of electrodes known throughout the industry for their durability. All Delmhorst electrodes fit any Delmhorst moisture meter. Below are electrodes that are typically used for this model:
30-E/C

Used for bales, 9 1/2" insulated pins, with 8 1/4" penetration, eliminates the effect of surface moisture.

830-5

Prods for testing standard and high density bales (requires H-4 Handle).

Available as:

  • 830-2 – 10” prod
  • 830-3 – 18” prod
  • 830-4 – 36” prod
  • 830-5 – 12” for hops
H-4 Handle

Electrode handle that attaches to the built-in connector on the top of any moisture meter. Used with the #830-5 10" prod for baled hops.

ACCESSORIES

MCS-44

This moisture content standard is great for verifying that your G-34 hops moisture meter is in calibration. With two electrical resistance values (8% and 10%) to test your meter against, you can be sure that your readings will stand up to the strictest standards of accuracy. The MCS-44 is also available with a letter of certification traceable to NIST.

G-34-PKG

Manufacturer: Delmhorst Instrument Co
Product ID: G-34-PKG
Price: $616.55
QTY Add to cart

G-34-PKG

The G-34 lets you easily check moisture levels in baled hops to assure high-quality harvest and safe storage. The large analog display and built-in battery check make this a favorite among hop growers worldwide.

  • Easy-to-read analog display
  • Moisture Range: 7%-14% on hops.
  • Built-in battery and calibration check.
  • Auto-shutoff timer saves battery life.
  • Size: 7 3/8” x 3 7/8” x 2 3/4”.
  • Weight: 1 lb.
  • Rugged construction ensures years of reliable use.
  • Sturdy plastic carrying case.
  • 9V battery.
  • 1-year warranty.
ELECTRODES
Delmhorst offers a wide assortment of electrodes known throughout the industry for their durability. All Delmhorst electrodes fit any Delmhorst moisture meter. Below are electrodes that are typically used for this model:
30-E/C

Used for bales, 9 1/2" insulated pins, with 8 1/4" penetration, eliminates the effect of surface moisture.

830-5

Prods for testing standard and high density bales (requires H-4 Handle).

Available as:

  • 830-2 – 10” prod
  • 830-3 – 18” prod
  • 830-4 – 36” prod
  • 830-5 – 12” for hops
H-4 Handle

Electrode handle that attaches to the built-in connector on the top of any moisture meter. Used with the #830-5 10" prod for baled hops.

ACCESSORIES

MCS-44

This moisture content standard is great for verifying that your G-34 hops moisture meter is in calibration. With two electrical resistance values (8% and 10%) to test your meter against, you can be sure that your readings will stand up to the strictest standards of accuracy. The MCS-44 is also available with a letter of certification traceable to NIST.

G-34W-CS

Manufacturer: Delmhorst Instrument Co
Product ID: G-34W-CS
Price: $484.51
QTY Add to cart

G-34W-CS

The G-34 lets you easily check moisture levels in baled hops to assure high-quality harvest and safe storage. The large analog display and built-in battery check make this a favorite among hop growers worldwide.

  • Easy-to-read analog display
  • Moisture Range: 7%-14% on hops.
  • Built-in battery and calibration check.
  • Auto-shutoff timer saves battery life.
  • Size: 7 3/8” x 3 7/8” x 2 3/4”.
  • Weight: 1 lb.
  • Rugged construction ensures years of reliable use.
  • Sturdy plastic carrying case.
  • 9V battery.
  • 1-year warranty.
ELECTRODES
Delmhorst offers a wide assortment of electrodes known throughout the industry for their durability. All Delmhorst electrodes fit any Delmhorst moisture meter. Below are electrodes that are typically used for this model:
30-E/C

Used for bales, 9 1/2" insulated pins, with 8 1/4" penetration, eliminates the effect of surface moisture.

830-5

Prods for testing standard and high density bales (requires H-4 Handle).

Available as:

  • 830-2 – 10” prod
  • 830-3 – 18” prod
  • 830-4 – 36” prod
  • 830-5 – 12” for hops
H-4 Handle

Electrode handle that attaches to the built-in connector on the top of any moisture meter. Used with the #830-5 10" prod for baled hops.

ACCESSORIES

MCS-44

This moisture content standard is great for verifying that your G-34 hops moisture meter is in calibration. With two electrical resistance values (8% and 10%) to test your meter against, you can be sure that your readings will stand up to the strictest standards of accuracy. The MCS-44 is also available with a letter of certification traceable to NIST.

G-7

Manufacturer: Delmhorst Instrument Co
Product ID: G-7
Price: $542.57
QTY Add to cart

G-7

The G-7 is a rugged resistance-type meter, great for testing the moisture content of grain at harvest time and while in storage. The integral double-disc electrode cup holds only 3-4 grams, allowing for more uniform sampling and providing accurate and repeatable readings. You can even attach optional accessories to check moisture in bulk material and hay. The G-7 also provides useful statistics on stored readings.

  • Built-in calibrations for barley, coffee, corn, flax, hay, oats, pasta, rapeseed, rough rice, rye, sorghum, soybeans, and wheat.
  • Built-in temperature correction over the range of 32 - 160° F (0 - 70° C).
  • Programmable offset to match elevator.
  • Stores up to 150 accumulated readings in user-defined batches by grain.
  • Displays the average and highest readings, and standard deviation and co-efficient of variance of stored readings.
  • Audible, adjustable alarm alerts you when a pre-selected MC has been reached.
  • Built-in connector accepts any Delmhorst electrode.
  • Built-in calibration check.
  • Moisture Range: 9%-30% MC, depending on the grain.
  • Size: 7 1/4” x 6” x 5 1/2”.
  • Weight: 4 lbs.
  • Rugged construction ensures years of reliable use.
  • Optional sturdy plastic carrying case.
  • 9V battery.
  • 1-year warranty.
ELECTRODES
Delmhorst offers a wide assortment of electrodes known throughout the industry for their durability. All Delmhorst electrodes fit any Delmhorst moisture meter. Below are electrodes that are typically used for this model:
1900

The 1900 is the standard upper electrode assembly for the G-7 grain moisture meter. The 1900 has a serrated face, and is used with 313CUP-0005 sample cup.

313CUP-0005 Sample Cup

The 313CUP-0005 is a replacement sample cup for G-7 grain moisture meter. Used with 1900 upper electrode assembly.

313CUP-0006 Sample Cup

The 313CUP-0006 is a replacement sample cup with smooth surface for checking flour using the G-7 grain moisture meter. Used with 315ELE-0024 upper electrode assembly.

315ELE-0024

The 315ELE-0024 is similar to the 1900 except with a smooth surface for testing flour or granular material. Used with 313CUP-0006 sample cup.

830 Series

Prods for testing standard and high density bales (requires H-4 Handle).

Available as:

  • 830-2 – 10” prod
  • 830-3 – 18” prod
  • 830-4 – 36” prod
  • 830-5 – 12” for hops
831 Short Pin Prod

For testing hay in the windrow (requires H-4 Handle).

832

Long pin prod – for testing grain in bulk (requires H-4 Handle).

H-4 Handle

Electrode handle that attaches to the built-in connector on the top of any moisture meter. Can be used with the 830 series prods, 831 short pin disc shaped prod, and 832 long pin disc shaped prod. This is useful for large or high density bales of hay or scrap paper. Two handed operation is recommended over using a prod that connects directly to the top of the meter (like our 1235 series) to minimize stress placed on the meter casing.

ACCESSORIES

303BRU-0012

Brush used to clear off 313CUP-0005 or 313CUP-0006 sample cups.

324CAS-0016

This sturdy plastic carrying case fits the G-7 grain moisture meter. This case cay be ordered separately.

G-78W-CS

Manufacturer: Delmhorst Instrument Co
Product ID: G-78W-CS
Price: $484.51
QTY Add to cart

G-78W-CS

The G-7 is a rugged resistance-type meter, great for testing the moisture content of grain at harvest time and while in storage. The integral double-disc electrode cup holds only 3-4 grams, allowing for more uniform sampling and providing accurate and repeatable readings. You can even attach optional accessories to check moisture in bulk material and hay. The G-7 also provides useful statistics on stored readings.

  • Built-in calibrations for barley, coffee, corn, flax, hay, oats, pasta, rapeseed, rough rice, rye, sorghum, soybeans, and wheat.
  • Built-in temperature correction over the range of 32 - 160° F (0 - 70° C).
  • Programmable offset to match elevator.
  • Stores up to 150 accumulated readings in user-defined batches by grain.
  • Displays the average and highest readings, and standard deviation and co-efficient of variance of stored readings.
  • Audible, adjustable alarm alerts you when a pre-selected MC has been reached.
  • Built-in connector accepts any Delmhorst electrode.
  • Built-in calibration check.
  • Moisture Range: 9%-30% MC, depending on the grain.
  • Size: 7 1/4” x 6” x 5 1/2”.
  • Weight: 4 lbs.
  • Rugged construction ensures years of reliable use.
  • Optional sturdy plastic carrying case.
  • 9V battery.
  • 1-year warranty.
ELECTRODES
Delmhorst offers a wide assortment of electrodes known throughout the industry for their durability. All Delmhorst electrodes fit any Delmhorst moisture meter. Below are electrodes that are typically used for this model:
1900

The 1900 is the standard upper electrode assembly for the G-7 grain moisture meter. The 1900 has a serrated face, and is used with 313CUP-0005 sample cup.

313CUP-0005 Sample Cup

The 313CUP-0005 is a replacement sample cup for G-7 grain moisture meter. Used with 1900 upper electrode assembly.

313CUP-0006 Sample Cup

The 313CUP-0006 is a replacement sample cup with smooth surface for checking flour using the G-7 grain moisture meter. Used with 315ELE-0024 upper electrode assembly.

315ELE-0024

The 315ELE-0024 is similar to the 1900 except with a smooth surface for testing flour or granular material. Used with 313CUP-0006 sample cup.

830 Series

Prods for testing standard and high density bales (requires H-4 Handle).

Available as:

  • 830-2 – 10” prod
  • 830-3 – 18” prod
  • 830-4 – 36” prod
  • 830-5 – 12” for hops
831 Short Pin Prod

For testing hay in the windrow (requires H-4 Handle).

832

Long pin prod – for testing grain in bulk (requires H-4 Handle).

H-4 Handle

Electrode handle that attaches to the built-in connector on the top of any moisture meter. Can be used with the 830 series prods, 831 short pin disc shaped prod, and 832 long pin disc shaped prod. This is useful for large or high density bales of hay or scrap paper. Two handed operation is recommended over using a prod that connects directly to the top of the meter (like our 1235 series) to minimize stress placed on the meter casing.

ACCESSORIES

303BRU-0012

Brush used to clear off 313CUP-0005 or 313CUP-0006 sample cups.

324CAS-0016

This sturdy plastic carrying case fits the G-7 grain moisture meter. This case cay be ordered separately.

KS-D1W-CS

Manufacturer: Delmhorst Instrument Co
Product ID: KS-D1W-CS
Price: $358.11
QTY Add to cart

KS-D1W-CS

The KS-D1 Digital Soil Moisture Tester, used with the GB-1 Gypsum Sensor Blocks, make up a valuable system to monitor the soil moisture available to the plants. This system eliminates guesswork, so that irrigation can be effectively scheduled, according to plants' requirements.

  • Bright, clear digital display.
  • Moisture Range: 0.1 - 15 Bars Tension.
  • 0-100 reference scale.
  • Spring-loaded binding posts allow for positive contact with the gypsum sensor blocks' leads.
  • Built-in calibration check.
  • Size: 2 3/4” x 4 3/4” x 1 3/4”.
  • Weight: 8 oz.
  • Rugged construction ensures years of reliable use.
  • Sturdy plastic carrying case.
  • 9V battery.
  • 1-year warranty.
ELECTRODES
Delmhorst offers a wide assortment of electrodes known throughout the industry for their durability. All Delmhorst electrodes fit any Delmhorst moisture meter. Below are electrodes that are typically used for this model:
GB-1 Gypsum Sensor Blocks

The blocks are made of gypsum, cast around two concentric, stainless steel electrodes. They are manufactured under controlled conditions to obtain a maximum degree of uniformity and fast response to soil moisture changes. The GB-1 measures 7/8” dia. x 1 1/8” in height. It is the most widely used sensing unit, easy to install and especially suited for extensive sampling of soil at various depths.

TM-100-SB-PKG

Manufacturer: Delmhorst Instrument Co
Product ID: TM-100-SB-PKG
Price: $721.87
QTY Add to cart

TM-100-SB-PKG

The Delmhorst TM-100 digital LCD moisture meter measures temperatures between -40 deg. F to 300 deg. F/-40 deg. C to 150 deg. C. Ideal for various applications in industry and agriculture, this instrument incorporates reliable semiconductor technology in a sturdy ABS plastic case. The RTD sensor is housed in stainless steel to withstand the most demanding applications.

  • Bright, clear digital display.
  • Temperature Range: -40ºF to 300ºF (-40ºC to 150ºC).
  • Fast response time:
    • 2 minutes for 63% excursion.
    • 4-5 minutes full excursion.
  • Can be used to check temperature in the air or in penetrable solids.
  • Size: 2 3/4” x 4 3/4” x 1 3/4”.
  • Weight: 8 oz.
  • Rugged construction ensures years of reliable use.
  • Sturdy plastic carrying case.
  • 9V battery.
  • 1-year warranty.
ELECTRODES
Delmhorst offers a wide assortment of electrodes known throughout the industry for their durability. All Delmhorst electrodes fit any Delmhorst moisture meter. Below are electrodes that are typically used for this model:
PE-22 PROBE EXTENSION

Used with TS-107 Sensor. Available in 3 ft. length.

SH-44 HANDLE

Used with TS-107 Sensor.

TS-102 SENSOR

Used for liquids, gases, ambient temperature. Stainless steel probe length 5". Delrin handle.

TS-107 SENSOR

Used for penetrable solids. Ideal for hay and grain. TS-107, (3 1/2" long) is made of aluminum and delrin parts with a stainless steel tip. Requires SH-44 handle.

ACCESSORIES
No accessories available

TM-100W-CS

Manufacturer: Delmhorst Instrument Co
Product ID: TM-100W-CS
Price: $284.64
QTY Add to cart

TM-100W-CS

The Delmhorst TM-100 digital LCD moisture meter measures temperatures between -40 deg. F to 300 deg. F/-40 deg. C to 150 deg. C. Ideal for various applications in industry and agriculture, this instrument incorporates reliable semiconductor technology in a sturdy ABS plastic case. The RTD sensor is housed in stainless steel to withstand the most demanding applications.

  • Bright, clear digital display.
  • Temperature Range: -40ºF to 300ºF (-40ºC to 150ºC).
  • Fast response time:
    • 2 minutes for 63% excursion.
    • 4-5 minutes full excursion.
  • Can be used to check temperature in the air or in penetrable solids.
  • Size: 2 3/4” x 4 3/4” x 1 3/4”.
  • Weight: 8 oz.
  • Rugged construction ensures years of reliable use.
  • Sturdy plastic carrying case.
  • 9V battery.
  • 1-year warranty.
ELECTRODES
Delmhorst offers a wide assortment of electrodes known throughout the industry for their durability. All Delmhorst electrodes fit any Delmhorst moisture meter. Below are electrodes that are typically used for this model:
PE-22 PROBE EXTENSION

Used with TS-107 Sensor. Available in 3 ft. length.

SH-44 HANDLE

Used with TS-107 Sensor.

TS-102 SENSOR

Used for liquids, gases, ambient temperature. Stainless steel probe length 5". Delrin handle.

TS-107 SENSOR

Used for penetrable solids. Ideal for hay and grain. TS-107, (3 1/2" long) is made of aluminum and delrin parts with a stainless steel tip. Requires SH-44 handle.

ACCESSORIES
No accessories available