Bostik GreenForce is a high performance adhesive and moisture control membrane all in one. Bostik's breakthrough AXIOS Tri-Linking Polymer Technology used in this formulation maintains the superior long term durability and moisture protection properties of high en urethane adhesives. However, it is easier to spread and clean off prefinished flooring before and after cure. This adhesive has zero VOC's and does not contain any water.
Adhesive & Moisture Membrane Installation Method:
1/2" x 15/32" V Notch- Solid, engineered or bamboo wood flooring >5/8" thick. Coverage 20 sq. ft. per gallon
1/4" x 1/4" V Notch- Solid, engineered or bamboo wood flooring >5/8" thick. Coverage 30 sq. ft. per gallon
1/4" x 3/16"" V Notch- Engineered wood flooring up to 3/8" thick. Coverage 35 sq. ft. per gallon
Adhesive Only Installation Method:
3/16" x 5/32" V Notch- Engineered hardwood flooring <1/2" think. Coverage 50 sq. ft. per gallon
1/4" x 1/4" x 1/8" Square Notch- Engineered hardwood flooring > 1/2" thick, solid wood or bamboo flooring <1/2" thick, and parquet < 3/4" thick. Coverage 40 sq. ft. per gallon
1/4" x 1/4" x 1/4" Square Notch- Solid wood or bamboo flooring > 1/2" thick or plywood. Coverage 35 sq. ft. per gallon
Store at temperatures between 50°F and 100°F. Shelf life is one year from date of manufacturing in closed, original packaging.
Re-seal partially used container:
Clean all adhesive residue off of the lip of the pail and the groove around the perimeter of the lid. Plastic (e.g. a trash bag) may be placed into the pail to cover the wet adhesive, especially in high humidity environments, but do not allow the plastic to extend outside of the pail and interfere with the seal of the pail with the lid. Use a rubber mallet to fully seal the lid on the pail. Do not turn the pail over.
Re-open partially used container:
Remove the lid. Peel cured material away from the pail and discard cured material and plastic from the top of the pail. Any uncured material may be used.