Basic Coatings Street Shoe 275 - is the lowest VOC product offered by Basic Coatings. Based on the formula of the legendary StreetShoe XL, this product meets all US regulations for VOC compliance. StreetShoe 275 has several new benefits:
- Same toughness as the original Basic Coatings Street Shoe
- Easy to apply. Can even be applied with a roller.
- Self leveling.
- Resists tannin pull in tough-to-finish species like white oak.
Comes complete with catalyst.
Coverage : 500 - 700 Square Feet per Gallon.
Coverage : 500 - 700 Square Feet per Gal.
Color in Container:Milky white (dries clear)
Chemical Resistance: Excellent
Flash Point: Greater than 200ï¿½ F
VOC: Maximum VOC does not exceed 250 grams/liter, excluding water
Luster @ 60ï¿½ on wood: Gloss: >80 units, Semi-Gloss: 45-55 units, Satin: 25-30 units, Super Matte: 10-15 units
Pot Life: Once catalyzed: 24 hours
Dry Time: Minimum 2-3 hours between coats and 1 hour of good ventilation before closing job site. Use of fans and moisture meter is recommended.
Clean Up: Water
Storage: Do not store above 120ï¿½F (49C)
- 275 VOC: LEED compliant.
- No waste; can be recatalyzed.
- Fastest cure available; 90% cured in 24 hours.
- Easy to apply.
- UV Inhibitor minimizes sunlight-related color changes.
- Four sheens (Super Matte, Satin, Semi-Gloss, Gloss).
- Ultimate in durability.
Use a T-bar or floor finish roller to apply StreetShoe. Use a cut-in pad to get into tight areas. Buff between coats of finish using a maroon conditioning pad for smoothest results. See our FloorMechanics.TV video link for more info on applying Streetshoe.
Basic Coatings Streetshoe Replacement Catalyst for one gallon of Basic Coatings Streetshoe Wood Floor Finish - 3 oz bottle. If you have lost or spilled your catalyst or if you want to simply recatalyze a gallon of StreetShoe which was previously mixed/catalyzed you can purchase another bottle here.
Heavy Duty Bucket Dolly
This bucket dolly is excellent for easy moving of 3-1/2, 4 and 5 gallon buckets when spreading glue, mortar and cleaning grout from tile. The clamp screws give better stability and allow the dolly to be picked up along with the bucket. Dolly has a reinforced design and is injection plastic molded. Also has five casters (two lockable) with ball bearing swivels and 3/4" wide x 2" diameter nonmarring wheels for a 300 lb. capacity. Weighs 4-1/2 lbs.