DuraSeal Quick Dry Sealer -Quart

DuraSeal Quick Dry Sealer -Quart

Manufacturer: DuraSeal

Product ID: 865600000

Price: $9.74

QTY Add to cart

DuraSeal Quick Dry Sealer

Quart

DuraSeal Quick Dry Sealer quickly and conveniently seals wood floos to prepare them for finishing. This product provides a firm bond between the wood floor substrate and succeeding finish coats. DuraSeal Quick Dry Sealer meets the definition for a quick dry sealer by method ASTM D 1640. This product will give a glossy sheen. 

Materials Check-list:
  • To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Please click the "Materials" tab  to locate the materials check-list for a list of the recommended  tools.

Color:

  • This product has a glossy sheen.

Dry Time and Cure:

  • DuraSeal Quick Dry Sealer is dry to the touch within 30 minutes. This product is ready for re-coating within 2 hours and meets the definition of ASTM D 1640.

Clean-up:

  • Clean DuraSeal Quick Dry Sealer using mineral spirits or paint thinner. 

Storage:

  • Keep containers tightly closed. Isolate from heat, electrical equipment, sparks and open flame. 

Coverage:

  • DuraSeal Quick Dry Sealer covers approximately 500 sq. ft. per gallon.

Application Hints:

  • Read the "HOW TO" tab of this listing for application hints.

Surface Preparation:

  1. Sand floors according to NWFA specifications. 
  2. Vacuum thoroughly and tack the floor. If desired, apply DuraSeal Penetrating Finish in your choice of color and allow to dry thoroughly, per label directions.

Application:

  1. Apply DuraSeal Quick Dry Sealer with a natural China bristle brush or lambs wool applicator at a coverage rate of 500 square feet per gallon.
  2. Allow surface to dry thoroughly (e.g. 1-1/2 to 2 hours.) Note: Drying time will be increased by high humidity, low temperature, lack of air movement or heavier application.
  3. Buff surface with a new 180 grit screen or used 150 grit screen; vacuum thoroughly and tack.
  4. Apply the appropriate number of DuraSeal Polyurethane finish coats to achieve the desired look or durability.

Dry Time and Cure:

  • DuraSeal Quick Dry Sealer is dry to the touch within 30 minutes. This product is ready for re-coating within 2 hours and meets the definition of ASTM D 1640.
Materials Check-list:

To get the best results it always pays to have the right tools. It is our experience that the "big box" stores do not offer the tools needed to do this job correctly. Listed below are a few recommended tools.


ALL RIGHTS RESERVED FloorMechanics.com, Floor Mechanics, Inc. Fast Browsing